• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.4
• /
• pp.185-194
• /
• 2013

Objectives The aim of this study was to evaluate the efficacy and safety of micro current taping therapy (MTT) on patients with chronic low back pain (CLBP). Methods We included 50 participants who met the inclusion criteria and 5 participants dropped out during the sessions due to the following reasons: 3 participants were personal reasons, 1 participant was taking medication, 1 participant was fore arm fracture. We attached "I" shaped 40 cm, 2 tapes along the erector muscles of the spine starting from both iliac crest and another "I" shaped 30 cm, 1 tape on the painful site horizontally. This procedure was done 8 times and participants visited a total of 9 times including a final visit for evaluation. We measured visual analog scale (VAS), range of motion (ROM) and schober's test on every visit. Participants completed a questionnaire of oswestry disability index (ODI) and Beck's depression inventory (BDI) on the first and last visits. Results In VAS for pain intensity and bothersomeness, there were significant decreases after 1st, 6th treatments. In range of extension, there was significant increase after 3rd treatment at first. In range of flexion, there was significant increase after 2nd treatment at first. In range of left flexion, there was significant increase after 4th treatment at first. In range of right flexion, there was significant increase after 3rd treatment at first. in schober's test, there was significant increase after 2nd treatment at first. In VAS, ROM, schober's test, BDI, ODI, there were significant improvement after all treatments had done. Conclusions There was a significant effect of MTT on CLBP. And there was no adverse effect.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.70-81
• /
• 2009

Statement of problem: The position and length of cantilever influence on the stress distribution of implants, superstructure and bone. In edentulous mandible, implant-supported cantilever prostheses that based 4 or 6 implants between mental foramens has been attempted. Excessive bite force loaded at cantilever prosthesis causes bone resorption and breakage of superstructure prosthesis around posterior implants. To complement the cantilever length of conventional prosthesis, In 1992, (McCartney) introduced "cantilever-rest-implant" and Malo reported "All-on-Four" in 2003. Purpose: Analyze and compare the stress distribution of conventional cantilever prostheses with rest implant and All-on-$Four^{TM}$ implant prostheses. Material and method: The external loads(300 N vertically, 75 N horizontally) are applied to first molar area. The stress value, stress distribution and aspect of stress dispersion are analyzed by three-dimensional finite element analysis program, ANSYS ver. 10.0. Results: 1. The rest implant and "All-on-Four" implant system are superior to conventional cantilever prostheses to reduce stress on the bone and the superstructure around implants. 2. The rest implant was of the greatest advantage to stress distribution on bone, implant and superstructure. 3. With same number of implants, distally tilted implants are preferred to conventional cantilever prostheses for reducing the length of cantilever.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.185-194
• /
• 2001

This study was designed to evaluate the effects of angulation changes of head posture on the enlargement ratios of a lateral headfilm depending on the vortical or horizontal rotation of the objects. A device was constructed to measure regional changes of enlargement ratios. The device was held within the cephalostat and cephalograms recorded at each measured degrees of the device tilting, vertically and horizontally. The enlargement ratios of the horizontal, vertical, and angular measurements on the films taken at each tilted angulations were obtained and compared with those on the films taken without rotation. In summary, the enlargement ratios of the horizontal linear measurements were decreased during horizontal rotations. The enlargement ratios of vortical measurements of the right side on the film were increased and those of the left side were decreased by the horizontal rotations. Enlargement ratios of horizontal measurements were affected further than those of vertical measurements by the same angular changes of the horizontal rotations. Therefore, a disruption of parallelism between the object's midsagittal plane and the film could result in distortion of the image while vertical rotation around the object's porionic axis would not significantly affect the enlargement ratios on the headfilm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.78-89
• /
• 1999

In this paper, to improve bandwidth amplitude fluctuation for the broadband signal in indoor propagation environment, we measured and analyzed broadband signal using a vertically polarized, horizontally polarized and circularly polarized antenna, conducting by frequency sweeping method in NLOS (Non-Line-of-Sight) environment. And, to investigate the optimum condition for the improvement of broadband propagation characteristics we also examined the effects of both human motions and transmission antenna height in the NLOS environment. As a result, in the case of NLOS environment, it was found that the amplitude deviation characteristics in frequency bandwidth can be improved by polarization diversity reception. Especially, we found that it is the best effective one to make polarization diversity reception branches, which install the circularly polarized antenna at transmitting end and install the polarized diversity branches received vertical or/and horizontal polarized wave at receiving end. The affection of a human motions is not so much in LOS and NLOS environment, but it can lead to the cause of burst error in indoor digital radio communications as the fade of signal strength become more deeper. And also, when raise the transmitting antenna up to the ceiling, the LOS and NLOS environment could be coexisted. In this case, it can be also inferred that frequency bandwidth amplitude deviation must be fundamentally improved by using polarization diversity reception technique to make the possibility of high transmission rate.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.152-158
• /
• 2009

Total Skin Electron Beam Therapy (TSEBT) of linear accelerator has become use so as to be useful, 2~9 MeV of energy territories came to be used with mycosis fungoides and cutaneous lymphomas in the superficial lesion treatment which covers the major portion of the body. I treat a patient to Stanford technique in this study, and it is $60^{\circ}$ around the patients whom Stanford technique irradiated electronic beam to a linear accelerator in horizontal directions and there is a way a standard of TSEBT treat it to six located field (anterior, posterior, and four obliques) becoming. An each field does horizontally it and consist to beam of the two component which fitted the center to a suitable angle. a patient treats it to three dual field a day in order to make short treatment time. when a first day, we treat one dual field at anterior position and two dual field at posterior position. when the second day, treat one dual field at posterior position and two dual field at anterior position. Therefore, six dual field is finished in perfect periodic two days. we made cylindrical acrylic phantom, and I inserted a dosimeter film between phantom. in order to measure a dose distribution calculation before treat a patient, and a patient checked it in six field directions that got from a treatment. It is after that thermoluminescent dosimetry (TLD) as it uses Rando phantom and then measurement dose distribution in six field directions after attaching at chest, the right and left flank, a back after irradiation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.250-258
• /
• 2004

An experiment was conducted to examine the effect of a high environmental temperature on the performance, conformation, and carcass characteristics of pigs and the influence of diet. Thirty-six three-way crossed castrated male pigs with average initial body weight of 50.4 kg were used in the experiment. The pig were allocated to the following treatments: two environmental temperatures (20 and $30^{\circ}C$)${\times}$three dietary energy levels (2,980, 3,300 and 3,600 kcal/kg)${\times}$three protein levels (12.8, 15.2 and 17.2%). Daily weight gain was lighter (p<0.01) and feed: gain ratio lower (p<0.05) in pigs at $30^{\circ}C$ than for pigs at $20^{\circ}C$ The pigs at $30^{\circ}C$ were significantly taller with deeper bodies (p<0.05) and significantly longer (p<0.05) both vertically horizontally in the planum nasal when kept at $30^{\circ}C$. The width of body and the circumference of the neck were greater (p<0.05) at $20^{\circ}C$. The lean meat of the loin, middle section, ham, and hind section were significantly greater (p<0.05) in pigs kept at $30^{\circ}C$ and the belly was significantly heavier. The total unsaturated free fatty acids were significantly higher (p<0.05) in the body fat of pigs kept at $20^{\circ}C$ than in that of pigs at $30^{\circ}C$. The results indicated that when pigs are given very restricted same amounts of feed, they may need less energy to maintain their body temperature under moderately high environmental temperature ($30^{\circ}C$); consequently, their performance is better than that of pigs under optimum environmental temperature. The results showed very clearly that weight gain of pigs increased with increasing of dietary protein and energy content. The increasing of dietary protein content seemed more significant when content increasing to 17.2% compared with the 12.8 and 15.2% protein content treatments. The increasing of dietary energy content was more significant when content increasing to 3,600 compared with the other low energy content treatments.

• Spatial Information Research
• /
• v.22 no.1
• /
• pp.75-84
• /
• 2014

Power lines are one of the main obstacles causing an aircraft crash and thus their realtime detection is significantly important during flight. To avoid such flight obstacles, the use of LIDAR has been recently increasing thanks to its advantages that it is less sensitive to weather conditions and can operate in day and night. In this study, we suggest a fast method to detect power lines from LIDAR data for flight obstacle avoidance. The proposed method first extracts non-ground points by eliminating the points reflected from ground surfaces using a filtering process. Second, we calculate the eigenvalues for the covariance matrix from the coordinates of the generated non-ground points and obtain the ratio of eigenvalues. Based on the ratio of eigenvalues, we can classify the points on a linear structure. Finally, among them, we select the points forming horizontally long straight as power-line points. To verify the algorithm, we used both real and simulated data as the input data. From the experimental results, it is shown that the average detection rate and time are 80% and 0.2 second, respectively. If we would improve the method based on the experiment results from the various flight scenario, it will be effectively utilized for a flight obstacle avoidance system.

• Solar Energy
• /
• v.18 no.2
• /
• pp.145-152
• /
• 1998

In this experimental study, for obtaining the data to be used in the increased recover rate of waste heat from the recirculated sand, the furan foundry sand were used as the fluidized particle in the fluidized bed in which the smooth, spiral and finned tubes($Do={\varphi}12.7$) were horizontally installed and used as the heat-transfer tubes. The heat transfer experiments were performed in the conditions of water Reynolds number of inside tubes in the range of 4,000 to 18,000 and particle Reynolds number of outside tube in the range of 0.8 to 7.5. The heat-transfer coefficients(ho) increase as the higher inside temperature of the fluidized bed and the maximum heat-transfer coefficients can be obtained in the range of 3.5 to 5.5 of particle Reynolds number in the all tubes. The maximum Nu numbers of smooth, spiral and finned tubes are figured as about 1:1.5:3 in order even if the ratios show little different as the temperatures of bed.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.349-360
• /
• 2016

The Bunam Stock ($29.5km^2$ area) is an outcrop of plutonic complex classified four facies: coarse-grained granite, quartz monzodiorite, granodiorite and fine-grained granite. Three facies except the last one exhibit very irregular boundaries with gradational compositional variations between both facies and show concentric zoning from the central quartz monzodiorite through granodiorite to outer coarse-grained granite. Mafic microgranular enclaves (MME) commonly occur in granodiorite. Some MMEs, have very fine-grained chilled margins and indentedly crenulate contacts, and display horizontally circular and vertically elongate shapes. Their shape and granularity indicate coeval flow and mingling of partly crystalline felsic and mafic magmas. MMEs exhibit dark fine-grained margins giving them a ellipsoidal form that has been attributed to undercooling of a mafic magma as blobs intruded into a felsic magma. The observed relations in the Bunam Stock identify that two endmembers are coarse-grained granite from a felsic magma and quartz monzodiorite from a mafic magma, and hybrid is granodiorite including MMEs. So they exhibit concentric zoning that lays the center on the mafic endmember due to magma mixing at the contacts of two magmas, when mafic magma injected into felsic magma. Thus the quartz monzodiorite may probably represent an ancient conduit of mafic magma transport through a granitic magma chamber. Mafic magma would rise through the conduit in which favorable conditions for magma mixing occurred. All these features suggest that they formed from mixing processes of calc-alkaline magma in the Bunam Stock.

• Archives of Plastic Surgery
• /
• v.33 no.3
• /
• pp.347-352
• /
• 2006

Ingrowing toenail has been treated conventionally by various surgical treatment modlities. However, none of these procedures are perfect to achieve esthetic results with low cost, recurrence, and complication rates. Although mild cases can be treated conservatively, in severe recurrent cases, surgical treatment is preferred. The purpose of this study is to evaluate the effectiveness and safety of using partial matricectomy and paronychial advancement flap for correction of recurrent ingrowing toenail. Eight patients suffering from recurrent ingrowing toenail were operated using partial matricectomy and paronychial advancement flap in our department from August 2004 to August 2005. The number of recurrent episodes ranged from 2 to 5. With digital nerve block, the excision area was marked on nailplate and inflammed lateral nail fold. The horizontally designed paronychial flap considering defect size was effective for wide exposure of the neighboring germinal matrix, which is later to be completely excised or cauterized because remnant germinal matrix made postoperative spicule formation. The nailplate on the affected side was removed about 3-5 mm width longitudinally, being cautious not to damage the proximal dorsal nail fold. The same width of the sterile matrix including germinal matrix was excised longitudinally with inflammed granulation tissue and partial lateral nail fold on the affected side. The subcutaneously elevated paronychial flap was advanced to cover the defect and was anatomically sutured with 5-0 nylon sutures. We evaluated our procedure's effectiveness by examining some factors such as cosmetic results, recurrence, spicule formation, postoperative pain and duration of return to normal activities. In eight patients, no complication was observed such as recurrence, severe pain and spicule formation except for 1 case of infection. Postoperative discomfort was minimal. Average duration of return to normal activities was 12 days. Cosmetically the results were acceptable in all patients. The partial matricectomy and paronychial advancement flap for correction of recurrent ingrowing toenail were found to be technically simple, efficient procedure with a relative low recurrence rate and better cosmetic results.