• 한국콘텐츠학회논문지
• /
• 제10권5호
• /
• pp.210-219
• /
• 2010

본 연구에서는 선택모형을 이용하여 소비자패널자료를 분석함에 있어 시간의 흐름에 따라 동적(dynamic)으로 변화하는 소비자내부의 특성 차이를 반영한 특정소비자의 종적인 변화인 소비자동태성을 분석하였다. 선택모형 내에서 소비자동태성은 효용함수에 시변계수(time-varying coefficient)를 도입함으로써 표현될 수 있다. 본 연구에서는 이를 위해 계층적모형(hierarchical model)과 상태공간모형(state-space model)에 기반하여 Random-Walk 계수를 지니는 이산프로빗모형을 개발하였고, 개발된 모형을 패널자료로부터 추정하기 위하여 Gibbs 표본법을 적용하였다. 모형추정결과 효용함수의 시변계수들에 유의한 소비자동태성이 존재함을 확인할 수 있었다. 소비자동태성이 존재할 경우 이에 효과적으로 대응하기 위해서는 동적시장세분화가 필요하다고 할 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제14권1호
• /
• pp.205-210
• /
• 1989

The purpose of this study was to observe the minim pins of Link plus (which has buttress thread and shoulder stop design) inserted into dentin and the dentin surrounding pin. The gingival walls of class II cavity were prepared with high speed handpiece in molar teeth not elapsed time after teeth were extracted, and pinhole of 2mm in depth was positioned about 1 mm to the dentinoenamel junction and minim pin was inserted with wrench. After initial examination of the specimens, the specimens were sectioned longitudinally and horizontally to the pins with carborundum disc and low speed diamond saw (Isomet Buehler Ltd) All specimens were coated Au of 250-300${\AA}$ in thickness with Ion Sputter JFC 100 and observed under Scanning Electron Microscope (JSM-35) The following results were obtained. 1. The shoulder stop was seated on the enterance of pinhole in gingival wall, and there were the irregular space between the pin and dentin at the enterance to the pin hole and flakes of dentin lifting from the dentin floor. 2. In case of section to pin horizontally or longitudinally, the dentin debris were observed in gap between pin and dentin, and small cracks were often seen in the dentin surrounding minim pins.

• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.373-378
• /
• 2010

Nanostuctured TiAl powder was synthesized by high energy ball milling. A dense nanostuctured TiAl was consolidated using pulsed current activated sintering method within 2 minutes from mechanically synthesized powders of TiAl and horizontally milled powders of Ti+Al. The grain size and hardness of TiAl sintered from horizontally milled Ti+Al powders and high energy ball milled TiAl powder were 35 nm, 20 nm and 450 kg/$mm^2$, 630 kg/$mm^2$, respectively.

• 한국강구조학회 논문집
• /
• 제13권6호
• /
• pp.651-659
• /
• 2001

이 논문은 두 변수 탄성지반 위에 놓인 불연속 변단면 수평 곡선부재의 자유 진동에 관한 연구이다. 회전관성과 전단변형효과를 고려하여 두 변수 탄성지반 위에 놓인 변단면 수평 곡선부재의 자유진동을 지배하는 무차원 상미분방정식을 유도하였다. 변단면은 불연속 변단면으로 채택하였고, 회전-회전, 회전-고정 및 고정-고정의 단부조건을 갖는 원호형, 포물선형, 정현형, 타원형 곡선보의 고유진동수를 산출하였다. 수치해석의 결과로 무차원 고유진동수와 곡선부재의 변수들 사이의 관계를 표 및 그림에 나타내었으며 진동형의 예를 그림과 같이 나타내었다.

• Toxicological Research
• /
• 제17권4호
• /
• pp.279-286
• /
• 2001

Recently, there is an increasing nationwide concern in Korea that exposure to electric and magnetic fields in the home environment may not be safe in humans. To identify possible effects of horizontally polarized magnetic fields (MF) exposure on embryo-fetal development, timed-mated female Sprague-Dawley rats (24/group) received continuous exposure to 60 Hz MF at field strengths of 0 Gauss (sham control), 50mG,833 mG, or 5000 mG. Dams received MF of sham exposures for 22hr/day on gestation days 6 through 20. Experimentally generated MF were monitored continuously througout the study. There was no evidence of maternal toxicity of developmental toxicity in any MF-exposed groups. Mean maternal body weight, organ weights, and gross findings in groups exposed to MF did not differ from those in sham control. No significant differences in fetal deaths, fetal body weight, and placental weight were observed between MF-exposed groups and sham control. External, visceral, and skeletal examination of fetuses demonstrated no significant differences in the incidence of fetal malformations between MF-exposed and sham control groups. In conclusion, exposure of pregnant Sprague-Dawley rats to 60 Hz at MF strengths up to 5000 mG during gestation day 6-20 did not produce any biologically significant effect in either dams of fetuses.

• 수산해양기술연구
• /
• 제48권2호
• /
• pp.147-154
• /
• 2012

In head sea, a ship has mainly the longitudinal motion such as vertical acceleration and pitch. In that case, the motion characteristics of a ship will have changed as the location different from each of place vertically and horizontally on board. The author carried out an experiment about the ship's vertical acceleration and pitch according to the location for the head sea, and analyzed the data with the aid of the statistical and spectral analyzing method to get the motion characteristics of the vessels. The response of vertical acceleration and pitch not deeply depend on the decks vertically, but displayed the relative big different value horizontally even if same deck. The biggest response of vertical acceleration and pitch among the accommodations was shown at scientist room, but the value of it not reached to the minimum requirement of ISO 2631-1 for working on board.

• 융합신호처리학회논문지
• /
• 제13권3호
• /
• pp.150-155
• /
• 2012

위상한정 상관법은 특징점추출이나 고유얼굴을 사용하지 않고 얼굴을 인식할 수 있는 유용한 방법으로 정사각형 영역에 대하여 푸리에변환을 이용한다. 본 본문에서는 위상한정 상관법을 이용한 얼굴인식 방법의 성능을 향상시키기 위하여 이 기법에 보다 효과적인 정사각형 얼굴영역을 실험을 통하여 제안하고 있다. 구체적으로 세 가지 얼굴영역에 대하여 실험하였다. 첫째 머리부분과 여백을 포함하는 정사각형영역, 둘째 수평방향으로 양 귀 사이와 수직방향으로 턱끝에서 이마까지의 정사각형영역, 셋째 수평방향으로 입술 바로 밑을 지나는 선이 뺨영역과 만나는 두 점 사이, 수직방향으로 입술 바로 밑에서 이마까지의 정사각형영역이다. 실험결과 세 가지 영역 중에서 두 번째 얼굴영역이 위상한정 상관법의 임계치 설정에 가장 유리함을 보였다.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1033-1037
• /
• 2005

We have studied on the effect of the operation voltage according to the reverse twist for the different fringe field switching (FFS) structure. The FFS structure with a vertically patterned edge of the pixel electrode (VPP) has lower operation voltage comparing to the one with a horizontally patterned edge of the pixel electrode (HPP). The reason is like that the number of the pattern of the pixel edge for the VPP structure is one third comparing with the HPP structure and thus, there is small reverse twist area for the VPP structure. Actually, the reverse twist disturbs the twist of LC near adjacent active area, result that LCs near there have the unstable dynamics. That is, the operation voltage increases as the reverse twist area increases. Therefore, it is very important to design pixel electrode with a small reverse twist region for the FFS mode.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2013년 추계학술대회
• /
• pp.39-48
• /
• 2013

Recently, the using of prefabricated temporary equipments is increasing in the industrial field because it can reduce the installation and dismantling period. The various types of prefabricated temporary equipments are manufacturing with various materials in domestic and overseas countries. However, those equipments should win the safety certificate according to the "Governmental Notification about Safety Certification" which regulate the member-based safety certification. It tends to cause over performance of temporary equipments because it couldn't consider structural benefit of the prefabricated products. As the result of this study, it is concluded that the establishment of new safety certification standard for the prefabricated temporary equipments is resonable and the movable scaffold is appropriate for those prefabricated temporary equipment. The movable scaffolds are using as single structure and cannot be expands horizontally. Other types of temporary equipments are using as complex structure which can freely expand horizontally according to the main structure. From the results of the study, the standard of vertical compression performance of prefabricated movable scaffolds should be more than double the performance of single main frame. Other test items of safety certification standard should be fixed when the Notification is amended. The prefabricated temporary equipments which are adopted for the safety standard on assembled structure should be used, moved and kept in assembled state and not separated discretionally. The establishment of new standard for the assembled structure based on this study leads to the development of various types of temporary equipments using structural efficiency of prefabricated structure.

• 한국환경과학회지
• /
• 제2권1호
• /
• pp.17-26
• /
• 1993

The layer that is directly influenced by ground surface is called the atmospheric boutsdary layer in comparison with the free atmosphere of higher layer. In the boundary layer, the changes of wind, temperature and coefficient of turbulent diffusion in altitude are large and have great influences an atmospheric diffusion. The purpose of this paper is to express the structure and characteristics of development of mixed layer by using laboratory experiment and numerical simulation. Laboratory experiment using water tank are performed that closely simulate the process of break up of nocturnal surface inversion above heated surface and its phenomena are analyzed by the use of horizontally averaged temperature which is observed. The result obtained from the laboratory experiment is compared with theoretical ones from ; \textsc{k}-\varepsilon numerical model. The results are summarized as follows. 1) The horizontally averaged temperature was found to vary smoothly with height and the mixed layer developed obviously being affected by the convection. 2) The mean height of mixed layer may be predicted as a function of time, knowing the mean initial temperature gradient. The experimental values are associated well with the theoretical values computed for value of the universal constant $C_r$= 0.16, our $C_r$ value is little smaller than the value found by Townsend and Deardoru et al.