• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.33-41
• /
• 2017

본 연구에서는 3차원 구조의 토목섬유인 지오셀을 사면 법면 보호공으로 설치 시 사면 지표면의 수평투수계수 증가에 따른 안전율 증가 효과에 대하여 분석하였다. 지오셀의 수평투수능력과 보강효과를 평가하기 위해 실내실험으로 각각 수평투수실험을 수행하였다. 지오셀을 설치한 지반이 무보강지반보다 수평투수계수가 증가되었으며, 다공율이 6.43%인 기존 지오셀(지오셀 B)보다 38.18%인 격자구조의 지오셀 A를 지반에 설치했을 때, 수평투수계수가 더 증가하는 것으로 나타났다. 사면안정해석 컴퓨터 프로그램인 Soilworks를 사용하여 실내실험 결과와 강우강도를 모델링한 성토사면에 적용 후 침투해석과 사면안정해석을 수행하였다. 사면안정해석 결과 강우시 지오셀 보강사면의 지하수위 상승 억제 및 지표의 강우 유출효과를 확인하였으며, 내부마찰각과 겉보기 점착력의 증가와 더불어 수평투수계수의 증가로 인하여 사면의 안전율이 증가하는 것으로 나타났다.

• 한국농공학회논문집
• /
• 제52권6호
• /
• pp.111-123
• /
• 2010

In this study, laboratory model test on utilization of recycled aggregates and crushed stone as horizontal drains to use alternative material of sand in soft ground is practiced. The coefficient of permeability of the recycled aggregates and crushed stone showed largely 1.2~5.1 times and 2.0~3.3 times greater than sand, respectively. The horizontal coefficient of permeability in case of installing the horizontal perforated drain pipe showed largely 1.9~6.8 times more than the case of not installing. The drainage distance showed 1.7~1.8 times greater than sand. When a degree of consolidation is 90 %, there is no delay of consolidation in SCP and PVD improvement sections. Therefore, it is proven that the field applicability is excellent. Also, the suitable quality management criterion is presented to make use of a horizontal drains in soft ground on the basis of analysis of the physical and environmental characteristics.

• 한국지반공학회논문집
• /
• 제16권1호
• /
• pp.31-42
• /
• 2000

압밀과 투수는 흙의 중요한 공학적 특성중 하나이다. 일반적으로 점토에 대한 압밀 및 투수계수는 표준압밀시험을 통한 간접적인 방법에 의해 구해지고 있다. 그러나 표준압밀시험은 시료의 포화문제, 간극수압의 측정이 용이하지 않을 뿐 아니라, 횡방향 압밀시험을 수행 할 수 없어 그나마 정확한 횡방향 압밀계수를 산정할 수 없다. 그리고 압밀계수를 구하는데 가장 널리 이용되고 있는 해석방법인 Taylor방법과 Casagrande 방법은 2차압밀이 불분명하고 초기 직선부분을 찾을 수 없는 경우에 대해서는 신뢰성이 떨어진다고 할 수 있다. 따라서 본 논문에서는 이러한 실험상의 단점을 보완할 수 있게 제작된 Rowecell을 이용하여 포항지역의 이암풍화토를 이방성 및 시료의 크기를 고려해 횡방향압밀시험을 실시하고 이 결과를 4가지 해석방법$(Taylor,\; Casagrande,\; Hyperbolic,\; \delta/t-logt)$으로 비교 분석하여 해석방법에 따른 압밀계수의 차이점을 파악하였다. 또한 투수계수(k)와 간극비(e)의 관계를 규정할 수 있는 투수상수를 해석방법에 따라 구하였으며, 압밀시험에서 계산된 간접투수계수의 타당성을 검증하기 위해 Rowecell을 이용한 직접투수시험을 실시하고 그 결과를 비교하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.285-292
• /
• 2010

Recently, it is difficult to find a good soil ground due to the shortage of land for new construction site. Because of this situation, the geosynthetics are commonly used for reinforcing the substructure of the soil ground, and hence improving the bearing capacity and reducing the settlement. The geocell is one of geosynthetics and is the advanced system of geogrid. It is the way to increase earth strength and bearing capacity by using three dimension type of geocomposite. In this paper, the Horizontal permeability was determined with considering various geocell shapes. The permeability test was performed by following method of ASTM D4716(87) and potential filling material for geocell was used. The bearing capacity mechanism which enhances the soil ground with evenly maintaining the degree of the compaction was also analyzed for geocell reinforced ground.

• 한국지반공학회논문집
• /
• 제36권11호
• /
• pp.149-156
• /
• 2020

약액 그라우팅은 지반의 강도 증진 및 차수 공법에 성공적으로 이용되어 왔으나, 그라우트의 유동은 지층의 투구계수 이방성에 크게 영향을 받는다. 따라서, 본 연구에서는 전산 유체 역학법을 이용하여 투수계수의 이방성이 수평 약액 그라우팅의 유효 반경에 미치는 영향을 알아보았다. 먼저 수평 방향 약액 주입 시뮬레이션을 위하여 공극 매질내 2상 점성 유체의 유동을 모델링하였고, 경화에 따른 확산과 점성 변화 또한 고려했다. 수치해석 결과, 투수계수의 이방성으로 인해 그라우트 구근의 형태가 타원체로 발달했고, 용해에 따른 확산 때문에 그라우트 구근의 모서리로 갈수록 공극내 그라우트 포화도가 점진적으로 감소했다. 이 결과를 바탕으로 10, 50, 90의 임계포화도를 설정하여 그에 따른 수평 방향 및 수직 방향 유효 반경을 산출하였다. 또한, 0.01 - 100의 수평·수직 방향 투수계수비에 따른 유효 반경을 산출하여 회귀식을 개발했다. 본 연구 결과는 투수계수 이방성을 가진 지층의 특성을 이용한 보다 효율적인 약액 그라우트 주입 전략 계획에 기여할 것으로 기대한다.

• 산업기술연구
• /
• 제27권A호
• /
• pp.111-120
• /
• 2007

This paper is results of experimental research on the effect of application of similarity related to permeability of soil on the consolidation behavior as centrifuge modeling of consolidation is performed with the centrifuge model facility. In this research, the permeability of soil was controlled by changing the viscosity of porewater as the mixed water with glycerin was used during the centrifuge model experiments. The effect of drainage path on consolidation was investigated by installing the vertical drains. A serise of centrifuge model tests with conditions of single vertical and radial horizontal drainage were carried out. Kaolinite and Jumunjin standard sand were used as soft clay and surcharges respectively during tests. For testing condition of single vertical drainage considering similarity of permeability, it was found that consolidation with mixed porewater with glycerin was delayed in comparisons sons with test results with water only. For conditions of horizontal drainage with vertical drains, a low permeability by changing the viscosity of pore water resulted in delayed degree of consolidation at an initial stage of consolidation. But, it predicted not much differences in settlement as long as the consolidation time was sufficiently long enough to finish consolidation. Consequently, it was found that similarity in permeability should be considered to be critical for the case of centrifuge model experiments related to consolidation with long drainage path.

• 농업과학연구
• /
• 제40권3호
• /
• pp.253-260
• /
• 2013

In this study, laboratory model test carried out to present the suitable range of particle size distribution and clogging behavior of recycled aggregates and crushed stone as horizontal drains in soft ground. The recycled aggregates and crushed stone showed clogging phenomenon because the top fill material and bottom clay inflow into the horizontal drains. The pp mat was the most effective method to minimize clogging phenomenon. The horizontal coefficient of permeability in case of installing the pp mat showed largely 2.1 times more than the case of not installing. When the pp mat is not installing, the thickness of fine grained soil inflow into the horizontal drains showed 6.7~13.3% range in top fill material and 3.3~6.7% range in bottom clay. Overall, the reduction of the discharge capacity by fine grained soil inflow showed small in recycled aggregates and crushed stone. Also, the appropriate criterion range of particle size distribution is presented to make use of a horizontal drains in soft ground on the basis of laboratory test.

• 산업기술연구
• /
• 제28권B호
• /
• pp.71-79
• /
• 2008

Reports about coefficients of consolidation in horizontal direction of marine clays located at seven different sites on western and southern coast area in Korea were reviewed and characteristics of them were investigated. As results of analyses, for relation between the depth of ground and coefficients, any trend and correlation between them can not be found since they are more influenced by the nature of geological formation rather than the depth of ground. Dissipation time t50, one of important factors in estimating value of coefficient of consolidation in horizontal direction, was found to be quite related to them. For the correlation between the maximum pore pressure developed and coefficients, coefficient of consolidation in the horizontal direction tend to decrease with increase of the maximum pore pressure whereas the ground water level or static pore pressure do not have any specific correlation with those coefficients. Values of coefficient tends to increase with values of liquid limit, plastic limit and plastic index and thus they are found to be directly influenced by the contents of fines. Values of coefficient of consolidation in horizontal direction are also increased with increases of permeability in horizontal direction and coefficient of consolidation in vertical direction. They were highly correlated between coefficient of consolidation and permeability in horizontal direction while values of coefficient of consolidation in horizontal direction have a relatively low correlation with values of coefficient of consolidation in horizontal direction. Sometimes, coefficient of consolidation in horizontal direction obtained from field tests were estimated 2-3 times greater than those from laboratory tests.

• Geomechanics and Engineering
• /
• 제29권2호
• /
• pp.145-154
• /
• 2022

Complex geological conditions have a great influence on the mining of coalbed methane (CBM), which affects the extraction efficiency of CBM. This investigation analyzed the complicated geological conditions in the Liujia CBM block of Fuxin. A geological model of heterogeneities CBM reservoirs was established to study the influence of strike direction of igneous rocks and fault structures on horizontal well layout. Subsequently, the dual-porosity and dual-permeability mathematical model was established, which considers the dynamic changes of porosity and permeability caused by gas adsorption, desorption, pressure change. The results show that the production curve is in good agreement with the actual by considering gas seepage in matrix pores in the model. Complicated geological structures affect the pressure expansion of horizontal wells, especially, the closer to the fault structure, the more significant the effect, the slower the pressure drop, and the smaller the desorption area. When the wellbore extends to the fault, the pressure expansion is blocked by the fault and the productivity is reduced. In the study area, the optimal distance to the fault is 70 m. When the horizontal wellbore is perpendicular to the direction of coal seam igneous rock, the productivity is higher than that of parallel igneous rock, and the horizontal well bore should be perpendicular to the cleat direction. However, the well length is limited due to the dense distribution of igneous rocks in the Liujia CBM block. Therefore, the horizontal well pumping in the study area should be arranged along the direction of igneous rock and parallel plane cleats. It is found that the larger the area surrounded by igneous rock, the more favorable the productivity. In summary, the reasonable layout of horizontal wells should make full use of the advantages of igneous rock, faults and other complex geological conditions to achieve the goal of high and stable production.

• 한국지반신소재학회논문집
• /
• 제15권2호
• /
• pp.35-44
• /
• 2016

PET 인공골재의 배수특성 평가를 위하여 실내 수평투수실험, 실대형 수평투수실험을 실시하였다. 실내 수평투수실험은 PET 골재의 생산량에 따라 세 종류의 입도별로 분류하고, 분류된 PET 골재를 정해진 배합비에 의해 20가지로 분류하여 단계별 하중을 재하하면서 실시하였다. 또한 실내 수평투수실험에 의해 분석된 결과를 활용하여 재하하중에 따른 투수계수의 변화경향이 가장 적은 실험 유형의 배합비로 실대형 수평투수실험을 실시하였고, 실내 수평투수실험 결과와 비교하여 신뢰도를 평가하였다.