• 지질공학
• /
• 제15권2호
• /
• pp.155-168
• /
• 2005

절개사면에 설치 된 흙막이벽의 거동은 도심지 굴착공사에 적용된 흙막이벽의 거동과 다르다. 배면경사지 설치된 흙막이벽 설계법을 확립하기 위하여는 흙막이벽 및 배면지반의 변형거동을 상세히 규명할 필요가 있다. 따라서, 본 연구에서는 아파트 신축부지 절개사면의 보강을 위하여 앵커지지 흙막이벽과 억지말뚝이 설치된 사면을 대상으로 현장계측을 수행하였다. 계측결과 굴착초기 흙막이벽의 변형은 배면경사지반의 변형보다 크게 발생되지만, 굴착깊이가 깊어짐에 따라 배면경사지반의 변형이 크게 발생됨을 알 수 있다. 이러한 이유는 굴착초기에 흙막이벽의 변형이 흙막이 말뚝의 강성과 앵커인장력에 의하여 억제되었기 때문으로 판단된다. 앵커에 도입된 선행인장력은 흙막이벽의 거동에만 큰 영향을 미치며, 강우로 인한 흙막이벽의 변형은 지하수위의 변화보다 지표면 부근에서의 침투수에 의해 영향을 받는다 한편, 굴착배면의 경사진 사면에 설치된 앵커지지 흙막이벽의 수평변위는 굴착배면지 반이 수평인 흙막이벽의 수평변위 보다 2-6배정도 크게 발생하였다.

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1480-1487
• /
• 2012

최근, 국내 탄광의 안전성이 향상되고 있으나 사고는 꾸준히 발생하고 있다. 대부분의 터널 지보는 I빔과 I빔을 연결하는 이음판 부분에서 지압을 견디지 못하고 파손이 발생한다. XX 탄광의 경우, 터널지보의 아치부가 일반적인 굽힘 거동이 아닌, 위쪽 방향으로 굽힘이 발생하고 있다. 이러한 경우는 터널지보에 수직하중 이외에 수평하중이 과대하게 작용하는 경우로 볼 수 있으며 이러한 수평하중은 지하암반의 급격한 변화에 의한 암반의 이완범위의 증가나 지하수의 누출 등으로 인한 수리학적인 요인 등의 복합적인 문제가 작용하여 나타난다. 따라서 본 연구에서는 위쪽 방향으로 굽힘을 일으키는 수평하중의 크기를 추정하기 위하여 실험계획법과 최적화 알고리듬을 적용하여 터널지보의 굽힘거동을 규명하였다.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.15-21
• /
• 2019

A rack-type warehouse has the advantage of storing a large amount in a small area by loading goods vertically. But in terms of fire risk, the fire load is very high, which can cause massive damage in the event of a fire. In the United States, research has been actively conducted to minimize the spread of vertical fires, and relevant standards have been established and operated. In Korea, research and related standards are insufficient to prevent the vertical spread of rack-type warehouse fires. In this study, an experimental study was conducted to prevent the vertical spread of a rack-type warehouse fire using a horizontal barrier and in-rack sprinklers. As a result of the test, the horizontal barrier considering the continuous flame prevented the vertical spread of the flame for a certain time. However, the horizontal barrier with continuous flame did not show the effect of preventing continuous flame. The combination of the horizontal barrier and the in-rack sprinkler prevented the vertical spread of fire effectively. In addition, the heat collecting effect through the horizontal barrier was shown and helped the early operation of the in-rack sprinklers.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.5684-5688
• /
• 2012

본 논문은 수평 선형 진동 모터에서 운동자의 가이드 역할을 하는 높은 피로 수명을 가진 판 스프링의 설계를 다루고 있다. 현재까지 수직 선형 진동 모터가 스마트 폰의 햅틱 기능과 수신 알람 기능을 위한 진동 발생 장치로 사용 하고 있다. 하지만 이 진동모터는 수직 진동 방향의 특성으로 인해 스마트 폰 슬림화의 한계에 대해 한 가지 주요 원인이 되고 있다. 수평 선형 진동 모터의 부품 중에서 가이드 역할을 하는 스프링은 핵심 부품 중에 하나이다. 그리고 이 가이드 스프링은 작동기의 탄성적인 진동을 가능하게 한다. 다양한 판 스프링이 디자인 되었고, 높은 피로 수명을 가지며, 요구되는 강성을 측정하기 위하여, 상용 구조해석 프로그램인 ANSYS를 이용하였다. 그리고 시제품을 제작하여 진동 가속 및 스프링 수명 시간을 측정하기 위한 실험을 하였다.

• 한국환경과학회지
• /
• 제16권7호
• /
• pp.771-778
• /
• 2007

This study has been conducted to achieve the following objectives: First, in order to understand the horizontal propagation and attenuation characteristics for the railroad traffic noise, we selected areas within 100 meters away from the railroad and then selected Saemaul-ho and Mugoongwha-ho as the subjects for our experiment. In this way, we analyzed the horizontal propagation and attenuation characteristics for the traffic noise occurring in diversified areas. Second, in order to understand the vertical propagation and attenuation characteristics for the railroad traffic noise, we measured and analyzed the distributional characteristics of vertical sound pressure levels on each floor of multi-storied apartment buildings according to changes of traffic load and types, and the existence or nonexistence of soundproof walls. For the case of the railroad traffic noise, we also selected Samaul-ho and Mugoongwha-ho as the subjects for our experiment, and we measured and analyzed the different noise levels on each floor of multi-storied apartment buildings from the soundproof wall. The results of Horizontal propagation and attenuation characteristics for the railroad traffic noise are as follows: In cases of the flat land, cutting land, and bridge area, as distance increases, the sound pressure level steadily decreases. The sound pressure level for the bridge area is higher than that of the flat land with a measurement of $5.5{\sim}10.2\;dB(A)$. Vertical propagation and attenuation characteristics for the railroad traffic noise are as follows: The amount of sound pressure level decrease is $14.2{\sim}14.8\;dB(A)$ for Samaul-ho and $13.5{\sim}14.3\;dB(A)$ for Mugoongwha-ho when measuring the vertical sound pressure levels at heights lower than 4.5 m, which indicates a fairly large decrease. At 6 m, the amount of decrease is 8.6 dB(A) for Samaul-ho and 8.2 dB(A) for Mugoongwha-ho, which indicates a small decrease.

• 한국입자에어로졸학회지
• /
• 제9권4호
• /
• pp.271-277
• /
• 2013

This article reports the drag reduction phenomenon of aqueous suspensions containing carbon nanotubes (CNTs) flowing through horizontal tubes. Stable nanofluids were prepared by using a surfactant. It is found that the drag forces of CNT nanofluids were reduced at specific flow conditions compared to the base fluid. It is found that the friction factor of CNT nanofluids was reduced up to approximately 30 % by using CNT nanofluids. Increased kinematic viscosities of CNT nanofluids are suggested to the key factors that cause the drag reduction phenomenon. In addition, transition from laminar to turbulent flow is observed to be delayed when CNT nanofluids flow in a horizontal tube, meaning that drag reduction occurs at higher flow rates, that is, at higher Reynolds numbers.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 춘계학술발표대회 논문집
• /
• pp.171-175
• /
• 2004

This study aims at the examination of the characteristics of sectional design by Raumplan through the analysis of his 12 houses in which his architectural design concept is clearly showed. The analysis proceeded through 12 sectional drawings, because of Raumplan is originated from the spatial concept which is dividing spaces with various differences of horizontal level. Through this investigation, three characteristics of sectional design by Raumplan which is to present : 1) Free horizontal variation by different level 2) Spatial division by splitted wall 3) Horizontal & vertical refraction of viewpoint & movement These characteristic seems like to including his intention to put into the various human behaviour in residence, it can be spatial clue to solve existential experience of 'homelessness' which is one of the biggest problems of modern times.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1448-1454
• /
• 2005

Horizontal displacement of slurry wall with strut is analyzed using 2-D numerical stress-displacement program, FLAC. Validation of the program results are performed using the pre- and ongoing excavation sections and further displacement is predicted in the stage of strut removal. The result show that the calculated displacement was very close to the measured displacement when 40% in-situ strut preloading is applied to the strut loading of the program considering the horizontal spacing of struts in the field. It was found that construction efficiency can be improved by partially removing the struts before putting slabs in the stage of subway structure construction.

• 한국지진공학회논문집
• /
• 제20권6호
• /
• pp.369-378
• /
• 2016

The design spectrum for Korea, which is known to belong to an intra-plate region, is developed from the ground motion records of the earthquakes occurred in Korea and overseas intra-plate regions. The horizontal spectrum is defined as geometric mean spectrum, GMRotI50. From the statistical analysis of the geometric mean spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. The developed design spectrum is valid for the estimation both spectral acceleration and displacement.

• Korean Journal of Geomatics
• /
• 제2권1호
• /
• pp.1-6
• /
• 2002

Korea is a small country with relatively large mountainous areas and has many difficulties from planning to completing one road. Maintaining a completed road presents even more difficulties. presently, in estimating design elements, the result varies according to the engineer and there are many cases that question the reliability of the results. Therefore, in this study, the alignment of highway was sampled using by the centerline path, the design elements of horizontal alignment were reduced by applying the Least Squares Method, and the accuracy was analyzed. By this method, IP, IA, R, $\Delta$R and A-parameter were also determined. By observing relatively long straight sections, the approximate values could be estimated, and particularly, the considerably accurate value of A-parameter was determined. This study, using the Least Squares Method, aims to contribute to the development of the alignment examination in frequent traffic accident regions.