• 한국지열·수열에너지학회논문집
• /
• 제12권4호
• /
• pp.1-7
• /
• 2016

This paper presents a design method for the horizontal straight ground heat exchanger (GHE) based on the Kavanaugh design method. In order to examine suitability of the suggested design method, a horizontal line type GHE was installed in a steel box of which the size was $5m{\times}1m{\times}1m$ filled with dried Joomunjin standard, and a thermal response test (TRT) was conducted for 21 hours. A numerical analysis was performed for a simulation of a peak month operation and for its verification by finite element method (FEM). According to the simulation results, it was concluded that the suggested design method for a horizontal straight GHE is reliable for the estimation of a design length.

• 한국지열·수열에너지학회논문집
• /
• 제8권1호
• /
• pp.21-31
• /
• 2012

This paper reviewed and evaluated some of the commonly used prediction models for thermal conductivity of soils with the experimental data. Semi-theoretical models for two-component materials were found inappropriate to estimate the thermal conductivity of dry state soils. It came out that the model developed by Cote and Konrad gave the best overall prediction results for unsaturated soils available in the literature. However, it still needs to be improved to cover a wider range of soil types and degrees of saturation. In the present study, parametric analysis is also conducted to investigate the effect of soil type and moisture content on the horizontal ground heat exchanger design. The analysis shows that horizontal ground heat exchanger pipe length is reduced with the increase of soil thermal conductivity and water content. The calculation results also show that horizontal ground heat exchanger size can be reduced to a certain extent by using backfilling material with a higher thermal conductivity of solid particles.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.105-105
• /
• 2003

Theoretical studies have been performed for drainage and filtration characteristics, low consolidation rate of sandmat and prefabricated horizontal and vertical drain. Discussion on quality control and methodology, cost analysis for sandmat and prefabricated horizontal drains were performed.

• Ocean Science Journal
• /
• 제41권2호
• /
• pp.121-124
• /
• 2006

Argo drifters provide information of the vertical structure in the water column and have a potential for the improvement of understanding phytoplankton primary production and biogeochemical cycles in combination with ocean color satellite data, which can obtain the horizontal distribution of phytoplankton biomass in the surface layer. Our examples show that using Argo drifters with satellite-measured horizontal distribution of phytoplankton biomass at the sea surface allow an improved understanding of the development of the spring bloom. The other possible uses of Argo drifter are discussed.

• 콘크리트학회논문집
• /
• 제25권1호
• /
• pp.81-90
• /
• 2013

이 연구에서는 합성보의 수평 접합면에 대한 수평전단력 저항성능을 평가하기 위하여 6개의 접합면 전단성능 실험체를 대상으로 접합면의 표면상태, 전단철근의 보강량과 상세 등의 구조변수에 대한 수평전단강도를 평가하였다. 휨압축파괴를 나타낸 SF-291B를 제외한 모든 실험체는 실험계획에서 의도한 대로 접합면의 수평전단력에 의한 전단파괴를 나타내었다. 설계기준식의 수평전단력 전달 또는 전단마찰 설계법으로 산정한 접합면 전단강도는 실험체의 수평전단 파괴를 초래한 접합면의 수평전단내력을 양호한 수준으로 평가하는 것으로 나타났으며, PCI 설계기준에서 제시한 전단철근의 배근상세와 정착길이는 접합면에서 요구되는 수평전단성능을 확보할 수 있다고 판단된다.

• Journal of information and communication convergence engineering
• /
• 제9권5호
• /
• pp.483-486
• /
• 2011

In this study, a fan-beam microstrip array antenna for an X-band radar was designed and fabricated using a novel technique. A microstrip array structure was used to obtain a high-gain and narrow horizontal beam-width. The feeding point is located at the center of the antenna because of its $360^{\circ}$ rotational characteristic. The measured results indicate a gain of 23dBi, and a horizontal and vertical beamwidth of $3.57^{\circ}$, $26.12^{\circ}$, respectively. The proposed antenna performed adequately and managed to meet the specifications.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.360-363
• /
• 2009

Variation of viewing position of the observer is one of factors of image distortion in the stereoscopic display. A rotation movement of the observer makes the stereoscopic image distortion and that is caused by different horizontal position of each eye of the observer. It is different from horizontal and depth directional movement of the observer. In this paper, we showed the numerical simulation result about the distortion analysis and the correction of the stereoscopic image in rotation movement of the observer.

• 열처리공학회지
• /
• 제30권5호
• /
• pp.207-214
• /
• 2017

In this study, failure behavior of piercing plug for seamless tube manufacturing process was studied. Three different kinds of passed piercing plugs (10, 90, 215 times) were prepared. The shape deformation of the passed piercing plugs was observed by 3D coordinate measuring machine, and the oxidized layer on the surface of piercing plug was observed by optical microscopy. The length reduction of piercing plug presented at 215 times passed plug. It was found that the oxidized layer consisted of outer scale, inner scale and internal oxidation layers, and the inner scale layer had vertical cracks, and interfaces had horizontal cracks. We proposed the failure mechanism of piercing plug during seamless tube manufacturing process based on the formation of vertical and horizontal crack.

• Mycobiology
• /
• 제45권3호
• /
• pp.226-231
• /
• 2017

Coprinopsis cinerea was employed to investigate the fungal response to gravity. Mycelium growth revealed a consistent growth pattern, irrespective of the direction of gravity (i.e., horizontal vs. perpendicular). However, the fruiting body grew in the direction opposite to that of gravity once the primordia had formed. For the proteomic analysis, only curved-stem samples were used. Fifty-one proteins were identified and classified into 13 groups according to function. The major functional groups were hydrolases and transferases (16%), signal transduction (15%), oxidoreductases and isomerases (11%), carbohydrate metabolism (9%), and transport (5%). To the best of our knowledge, this is the first report on a proteomic approach to evaluate the molecular response of C. cinerea to gravity.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 추계학술논문집 2부
• /
• pp.649-651
• /
• 2011

본 논문은 지상에 배치된 전파항법신호원의 배치에 따른 거리측정 정확도 분석에 대한 연구이다. 전파항법신호원의 배치 형태에 따른 수신기에서의 수평 측위 정확도(HDOP, Horizontal Dilution of Precision)를 제시하였다. 본 논문에서는 다양한 배치에 따른 측위 정확도를 이론적인 연구결과를 이용하여 분석한 결과를 제시하였다. 또한 전파항법신호원의 배치를 위한 시뮬레이터를 구현하였다.