• 제목/요약/키워드: Horizontal Tail

검색결과 51건 처리시간 0.023초

An Investigation of the Effects of Flaperon Actuator Failure on Flight Maneuvers of a Supersonic Aircraft

  • Oh, Seyool;Cho, Inje;McLaughlin, Craig
    • International Journal of Aerospace System Engineering
    • /
    • 제3권2호
    • /
    • pp.1-8
    • /
    • 2016
  • The improvements in high performance and agility of modern fighter aircraft have led to improvements in survivability as well. Related to these performance increases are rapid response and adequate deflection of the control surfaces. Most control surface failures result from the failure of the actuator. Therefore, the failure and behavior of the actuators are essential to both combat aircraft survivability and maneuverability. In this study, we investigate the effects of flaperon actuator failure on flight maneuvers of a supersonic aircraft. The flight maneuvers were analyzed using six degrees of freedom (6DOF) simulations. This research will contribute to improvements in the reconfiguration of control surfaces and control allocation in flight control algorithms. This paper compares the results of these 6DOF simulations with the horizontal tail actuator failures analyzed previously.

스포츠급 경항공기의 정안정 특성 풍동시험 연구 (A Wind Tunnel Study on the Static Stability Characteristics of Light Sport Aircraft)

  • 김종범;장영일;권기범;정형석;조환기;김상호;이재우
    • 한국항공우주학회지
    • /
    • 제40권8호
    • /
    • pp.711-717
    • /
    • 2012
  • 스포츠급 경항공기 개념 설계 단계에서 항공기의 정적 안정성 분석을 위해 1/5 축소모델로 풍동시험을 수행하였다. 제안된 경항공기의 동체 단독 및 동체에 주익, 수평꼬리날개, 수직꼬리날개 등을 조합한 6개 형상에 작용하는 공력을 내장형 밸런스를 이용하여 측정하고 정안정 미계수를 도출하여 기본 양항력 공력특성 및 각 요소가 세로 방향 가로 정안정 특성에 미치는 효과를 분석하였다. 풍동시험 결과로부터 특히, 수평꼬리날개와 수직꼬리날개 그리고 고익형태와 상반각을 갖는 주익 등이 각각 세로, 방향, 가로 정안정성에 미치는 기여정도를 정량적으로 파악하였으며, 본 시험결과는 항공기 각 형상 구성품 조합의 정안정 특성에 관한 유용한 실험자료로 활용될 수 있을 것이다.

Effect on measurements of anemometers due to a passing high-speed train

  • Zhang, Jie;Gao, Guangjun;Huang, Sha;Liu, Tanghong
    • Wind and Structures
    • /
    • 제20권4호
    • /
    • pp.549-564
    • /
    • 2015
  • The three-dimensional unsteady incompressible Reynolds-averaged Navier-Stokes equations and k-${\varepsilon}$ double equations turbulent model were used to investigate the effect on the measurements of anemometers due to a passing high-speed train. Sliding mesh technology in Fluent was utilized to treat the moving boundary problem. The high-speed train considered in this paper was with bogies and inter-carriage gaps. Combined with the results of the wind tunnel test in a published paper, the accuracy of the present numerical method was validated to be used for further study. In addition, the difference of slipstream between three-car and eight-car grouping models was analyzed, and a series of numerical simulations were carried out to study the influences of the anemometer heights, the train speeds, the crosswind speeds and the directions of the induced slipstream on the measurements of the anemometers. The results show that the influence factors of the train-induced slipstream are the passing head car and tail car. Using the three-car grouping model to analyze the train-induced flow is reasonable. The maxima of horizontal slipstream velocity tend to reduce as the height of the anemometer increases. With the train speed increasing, the relationship between $V_{train}$ and $V_{induced\;slipstream}$ can be expressed with linear increment. In the absence of natural wind conditions, from the head car arriving to the tail car leaving, the induced wind direction changes about $330^{\circ}$, while under the crosswind condition the wind direction fluctuates around $-90^{\circ}$. With the crosswind speed increasing, the peaks of $V_X,{\mid}V_{XY}-V_{wind}{\mid}$ of the head car and that of $V_X$ of the tail car tend to enlarge. Thus, when anemometers are installed along high-speed railways, it is important to study the effect on the measurements of anemometers due to the train-induced slipstream.

DUP (Direct Underside Pressurization)을 가진 위그선의 공력특성에 관한 연구 (Aerodynamic Characteristics of WIG Effect Vehicle with Direct Underside Pressurization)

  • 이주희
    • 한국항공우주학회지
    • /
    • 제38권7호
    • /
    • pp.655-663
    • /
    • 2010
  • DUP(direct underside pressurization)는 위그선이 이륙하기 위하여 수면 위를 항주할때 낮은 속도에서 이륙할 수 있도록 양력을 증가시키는 역할을 한다. 이러한 DUP가 위그선의 안정성과 공기역학적인 힘에 미치는 영향에 관하여 3차원 수치해석을 수행하였다. 해석에 사용된 위그선인 "Aircat"은 동체의 중심에 프로펠러가 있고 동체하부에 공기부양실이 있으며 Lippisch형의 날개와 큰 T자형의 수평꼬리날개를 가지고 있다. 저속에서 대부분의 양력은 프로펠러에 의해 가속된 공기가 동체의 가운데 통로를 통하여 공기부양실로 들어가 정체됨으로써 발생한다. 그러나 DUP에 의해 가속된 공기는 동압의 증가로 인하여 항력을 증가 시킬 뿐만 아니라 안정성에 영향을 주게 된다.

돼지의 전침 마취에 관한 연구 (Studies on Electroacupuncture Anesthesia of Pigs)

  • 권건오;김인봉;이성호;이성옥;김덕환;조성환;김무강;김명철;유명조
    • 한국임상수의학회지
    • /
    • 제16권2호
    • /
    • pp.409-412
    • /
    • 1999
  • To establish the electroacupuncture anesthesia for pigs, 6 piglets (Landrace mixed, 1 month old, 3.7~5.3 kg, female: 3 heads and male: 3 heads) were examined. The acupoints used for porcine electroacupuncture anesthesia were An-shen, and Tian-ping and Bai-hui. After horizontal insertion of needle to left and right An-shen, and perpendicular insertion to Tian-ping and Bai-hui, respectively, positive electrode was connected at right An-shen and Tian-ping, and negative electrode was connected at left An-shen and Bai-hui using veterinary electroacupuncture anesthesia apparatus, respectively. Electric condition was 3 V and 30 Hz. To examine the effect of electroacupuncture anesthesia, laparotomy (4 heads) and castration (2 heads)were applied. The induction time of electroacupuncture anesthesia was very rapid and about 1 minute, and pain of the body surface including the extremities was not detected. As for the reactions with electroacupuncture anesthesia, the head was directed to backward, nasal part was curved to one side, and blepharum was closed in part of changed nasal part. In addition, consciousness was vivid, and muscle tension and lift of the tail were observed in early stage but was relaxated afterwards. The pain was not found during incision and suture, bleeding was comparatively small volume and the class of anesthesia effect was excellent.

  • PDF

초월공동 수중운동체용 제어핀의 유체력 특성에 대한 실험연구 (An Experimental Study on Hydrodynamic Characteristics of a Control Fin for a Supercavitating Underwater Vehicle)

  • 정소원;박상태;안병권
    • 대한조선학회논문집
    • /
    • 제55권1호
    • /
    • pp.75-82
    • /
    • 2018
  • Wedge-shaped fins are generally used to provide sufficient forces and moments to control and maneuver a supercavitating vehicle. There are four fins placed along the girth of the vehicle, near he tail: two of the fins are horizontal and the other two fins are vertical. In a fully developed supercavitating flow condition, a part of the fin is in a cavity pocket and the other is exposed to water. In this paper, experimental investigations of hydrodynamic characteristics of the wedge-shaped fin models are presented. Experiments were conducted at a cavitation tunnel of the Chungnam National University. We first closely observed the typical formation of wake cavitation and measured lift and drag forces acting on two different test models. Next, using a special device for generating natural and artificial supercavities, we investigated hydrodynamic forces at different cavitation number conditions. This work provides a basis for interpreting the cavity stability and hydrodynamic characteristics of the wedge-shaped control fin for a supercavitating vehicle.

자동화 비행시험기법에 의한 소형 무인헬리콥터의 파라메터 추정 (Parameter Estimation of a Small-Scale Unmanned Helicopter by Automated Flight Test Method)

  • 방극희;김낙완;홍창호;석진영
    • 제어로봇시스템학회논문지
    • /
    • 제14권9호
    • /
    • pp.916-924
    • /
    • 2008
  • In this paper dynamic modeling parameters were estimated using a frequency domain estimation method. A systematic flight test method was employed using preprogrammed multistep excitation of the swashplate control input. In addition when one axis is excited, the autopilot is engaged in the other axis, thereby obtaining high-quality flight data. A dynamic model was derived for a small scale unmanned helicopter (CNUHELI-020, developed by Chungnam National University) equipped with a Bell-Hiller stabilizer bar. Six degree of freedom equations of motion were derived using the total forces and moments acting on the small scale helicopter. The dynamics of the main rotor is simplified by the first order tip-path plane, and the aerodynamic effects of fuselage, tail rotor, engine, and horizontal/vertical stabilizer were considered. Trim analysis and linearized model were used as a basic model for the parameter estimation. Doublet and multistep inputs are used to excite dynamic motions of the helicopter. The system and input matrices were estimated in the frequency domain using the equation error method in order to match the data of flight test with those of the dynamic modeling. The dynamic modeling and the flight test show similar time responses, which validates the consequence of analytic modeling and the procedures of parameter estimation.

공기역학적 성능을 고려한 인간동력항공기 개념 설계 (Preliminary Design of Human Powered Aircraft by the Consideration of Aerodynamic Performance)

  • 강형민;김철완
    • 항공우주기술
    • /
    • 제12권2호
    • /
    • pp.180-185
    • /
    • 2013
  • 본 연구에서는 공기역학적 성능을 고려하여 인간의 힘만으로 이륙할 수 있는 초경량 인간동력 항공기의 개념설계를 수행하였다. 이를 위해 조종사를 포함한 항공기 전체 무게를 결정한 이후 적절한 익형을 선정하여 주날개/보조날개를 설계하였다. 설계된 비행기의 형상을 기초로 3차원 전산해석을 하였으며, 이를 통해 양력/항력 등의 성능계수 및 항공기 무게 중심(CG)에 대한 계산을 수행하였다. 그 결과 비행기의 양력 및 추력이 양력 및 추력의 제한 조건을 만족하였다. 또한 비행기의 무게 중심(CG)이 주익의 공력 중심(AC)에 위치함으로써 26%의 정적 안정성이 보장되었다.

로봇 날개짓 비행체 '송골매' 개발 (Development of a Robot Ornithopter 'Songgolmae')

  • 장조원
    • 한국항공운항학회지
    • /
    • 제11권1호
    • /
    • pp.5-16
    • /
    • 2003
  • The present study was carried out to develop highly efficient RC ornithopter 'Songgolmae' powered by motor and battery. Designed electric ornithopter, which has the dimension of O.88m(W)${\times}$0.56m(L)${\times}$0.15m(H), is smaller than a conventional ornithopter. This ornithopter weighs 277 grams and has 3 channels radio control. It runs on an electric motor by a lithium polymer battery and has a gear ratio of about 75${\sim}$95 to 1 to flap its 88 cm wingspan. The aerodynamic performance of the ornithopter, applied to a flapping motion only, was validated by flight tests. Flight times have exceeded 23 minutes until the battery was used up. The flight test results indicate that the ornithopter developed here has sufficient thrust to propel itself in a forward flight. From the economical point of view and the handling of the RC ornithopter, it can be said that the developed robot ornithopter is an effective RC ornithopter. This robot ornithopter flies its way high into the sky just like a real bird flies. The robot ornithopter is used for a wide range of missions.

  • PDF

중력장의 변화가 양서류 초기 발생에 미치는 영향 (The effect of Novel gravitational fields on early Amphibian Morphogenesis)

  • 이은정;정해문
    • 한국동물학회지
    • /
    • 제35권4호
    • /
    • pp.518-525
    • /
    • 1992
  • 본 연구에서는 horizontal clinostat과 원심분리 방법의 이용으로 각각 저중력 상태($\mu$G)와 고중력 상태(3G)를 유도하여, 중력장의 변화가 양서류 수정란의 초기 형태 형성에 미치는 영향을 북방산개구리(Rano dybows비름를 대상으로 조사하였다. 중력장의 변화는 첫번째 수평 분열인 제3분열면의 위치에 영향을 미쳤다. 즉 저중력 상태에서는 분열면이 적도면 근처에서, 또 고중력 상태에서는 분열면이 동물극 근처에서 형성되었다. 이와 같은 변화는 포배기로 이어져 할강의 위치와 동물극 정단 세포층 수에 영향을 미쳤다. 즉 저중력에 노출된 포배는 정상배(1G)에 비해 할강이 중앙에 위치했으며 동물극 정단의 세포층 수가 증가하는 반면 고중력에 노출된 포배는 할강이 보다 동물극 폭에 위치했으며 동물극 정단의 세포층 수도 감소하였다. 그러나 낭배기에 도달하면 동물극 정단 세포층 수의 차이는 정상 상태로 조절되었다. 한편 중력장의 변화는 낭배기에 이르는 발생 속도와 원구상순부의 위치를 변경시켰다. 낭배기 이후의 발생 단계에서 중력에 의한 변화로는 tail fin circulation(stage 22)시기의 머리크기의 변화를 들 수 있다. 이상의 결과로 무미 양서류의 초기 형태 형성은 중력장에 의해 변형될 수 있으며 이러한 변화는 발생이 진행됨에 따라 조절되는 것으로 보인다.

  • PDF