• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.5
• /
• pp.399-406
• /
• 2019

The variation of ground-penetrating radar(GPR) signal characteristics from dielectric-filled nonmetallic pipes buried in inhomogeneous ground are compared through a numerical simulation. The relative permittivity distribution of the ground is generated by using the continuous random media(CRM) technique. As a function of the relative permittivity of the material filling the nonmetallic pipe buried in the ground media, GPR signals are simulated by using the finite-difference time-domain(FDTD) method. We show that, unlike the case for homogeneous ground, the distortion characteristics of the reflected waves caused by the front convex surface and the rear concave surface of the pipe buried in inhomogeneous ground are different depending on the permittivity contrast between the inside and outside of the pipe.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.1
• /
• pp.39-47
• /
• 2021

Compared to conventional method, if metal framework of removable partial denture is fabricated by selective laser melting, various laboratory works are omitted, saving time and simplifying the process. In addition, metal framework with homogeneous density can be obtained, expecting excellent mechanical properties, especially resistance to fatigue fracture. In these cases, impression were taken using conventional methods in partial edentulous patients, master casts were fabricated and scanned to obtain digital data. After designing the metal frameworks on the scanned data, removable partial dentures were fabricated using selective laser melting methods. Through these procedure, satisfactory outcomes were achieved both in functional and esthetic aspects.

• Coupled systems mechanics
• /
• v.11 no.2
• /
• pp.167-198
• /
• 2022

In this paper we deal with classical instability problems of heterogeneous Euler beam under conservative loading. It is chosen as the model problem to systematically present several possible solution methods from simplest deterministic to more complex stochastic approach, both of which that can handle more complex engineering problems. We first present classical analytic solution along with rigorous definition of the classical Euler buckling problem starting from homogeneous beam with either simplified linearized theory or the most general geometrically exact beam theory. We then present the numerical solution to this problem by using reduced model constructed by discrete approximation based upon the weak form of the instability problem featuring von Karman (virtual) strain combined with the finite element method. We explain how such numerical approach can easily be adapted to solving instability problems much more complex than classical Euler's beam and in particular for heterogeneous beam, where analytic solution is not readily available. We finally present the stochastic approach making use of the Duffing oscillator, as the corresponding reduced model for heterogeneous Euler's beam within the dynamics framework. We show that such an approach allows computing probability density function quantifying all possible solutions to this instability problem. We conclude that increased computational cost of the stochastic framework is more than compensated by its ability to take into account beam material heterogeneities described in terms of fast oscillating stochastic process, which is typical of time evolution of internal variables describing plasticity and damage.

• Journal of Digestive Cancer Research
• /
• v.5 no.1
• /
• pp.50-54
• /
• 2017

Pancreatic neuroendocrine tumors are rare pancreatic neoplasms comprising 1-2% of all pancreatic tumors and typically present high attenuating mass on arterial and venous phase images, due to their rich capillary network. A 70-year-old South Korean female visited our hospital presenting with jaundice and dark urine color. She had received an operation for treatment of small bowel perforation seven years ago. On physical examination, icteric sclera was observed but otherwise unremarkable. Laboratory tests were abnormal liver function test and suspected obstructive jaundice. Computed tomography revealed 4 cm sized cystic mass lesion with homogeneous low attenuation in the head of pancreas and distal common bile duct was compressed by the mass. During review of past medical records, we found that the mass was observed and measured about 1.7 cm seven years ago. To resolve obstructive jaundice, pylorus preserving pancreaticoduodenectomy was performed and diagnosed with well differentiated pancreatic neuroendocrine carcinoma with intermediate grade.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3754-3767
• /
• 2023

Turbulent jet discharges in subcooled water pools are essential for safety systems in nuclear power plants, specifically in the pressure suppression pool of boiling water reactors and In-containment Refueling Water Storage Tank of advanced pressurized water reactors. The gas and liquid flow in these systems is investigated using multiphase flow analysis. This field has been extensively examined using a combination of experiments, theoretical models, and Computational Fluid Dynamics (CFD) simulations. ANSYS CFX offers two approaches to model multiphase flow behavior. The non-homogeneous Eulerian-Eulerian Model has been used in this work; it computes global information and is more convenient to study interpenetrated fluids. This study utilized the Large Eddy Simulation Model as the turbulence model, as it is better suited for non-stationary and buoyant flows. The CFD results of this study were validated with experimental data and theoretical results previously obtained. The figures of merit dimensionless penetration length and the dimensionless buoyancy length show good agreement with the experimental measurements. Correlations for these variables were obtained as a function of dimensionless numbers to give generality using only initial boundary conditions. CFD numerical model developed in this research has the capability to simulate the behavior of non-condensable gases discharged in water.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.159-173
• /
• 2004

Using a generalized translog multiproduct cost function model, this paper examines economies of scale and scope in the vertically-integrated Korean railway industry. The paper then conceptualizes that the Korea National Railroad (KNR) produces four outputs (passenger-kilometers, ton-kilometers of freight, average length of passenger trips, and average length of freight haul) using three input factors(labor, fuel and maintenance, and rolling stock and capital). Using time series data collected from the KNR's annual records for the years from 1977 to 2002, the simultaneous equation system consisting of a cost function and two input share equatins is estimated with the Zellner's iterative seemingly unrelated regression. The findings show that the cost function corresponding to a non-Cobb-Douglas, non-homothetic, and non-homogeneous production technology adequately represents the KNR's cost structure. On the other hand, the Korean railway industry experiences sizeable overall scale economies, which result from substantial product-specific scale economies associated with passenger-kilometers and freight ton-kilometers and from scope economies associated with their joint production. In addition, the magnitude of economies of scope is influenced largely by the ratio of passenger trips, and has increased over time as the former has increased while the latter has decreased.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.742-748
• /
• 2004

Isopropanol of low boiling point was used as a solvent to prepare Al-doped ZnO(AZO) thin films. A homogeneous and stable sol was made from Zn acetate a solute whose mole concentration was 0.7mol/$\iota$ and Al chloride as a dopant. Al-doped ZnO thin films were prepared by sol-gel method as a function of post-heating temperature from 500 to $700^{\circ}C$ and the optical and electrical properties were investigated. The c-axis orientation along (002) plane was enhanced with the increasing of post-heating temperature and the surface morphology of the films showed a homogeneous and nano-sized microstructure. The optical transmittance of the films post-heated below $650^{\circ}C$ was over $86\%$, but decreased at $700^{\circ}C$. The electrical resistivity of the thin films decreased from 73 to 22 $\Omega$-cm as the post-heating temperature increased up to $650^{\circ}C$, but increased greatly to 580 $\Omega$-cm at $700^{\circ}C$. XPS analysis indicated that the deterioration of electrical and optical properties was attributed to the precipitation of $Al_2O_3$ phase on the surface of AZO thin film. This result suggests that the optimum post-heating temperature to improve electrical and optical properties is $600^{\circ}C$.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.471-478
• /
• 2013

PURPOSE. The aim of the study was to evaluate the effect of annealing on the nanostructure and hardness of Co-Cr metal ceramic samples that were fabricated with a direct metal laser sintering (DMLS) technique. MATERIALS AND METHODS. Five groups of Co-Cr dental alloy samples were manufactured in a rectangular form measuring $4{\times}2{\times}2$ mm. Samples fabricated by a conventional casting technique (Group I) and prefabricated milling blanks (Group II) were examined as conventional technique groups. The DMLS samples were randomly divided into three groups as not annealed (Group III), annealed in argon atmosphere (Group IV), or annealed in oxygen atmosphere (Group V). The nanostructure was examined with the small-angle X-ray scattering method. The Rockwell hardness test was used to measure the hardness changes in each group, and the means and standard deviations were statistically analyzed by one-way ANOVA for comparison of continuous variables and Tukey's HSD test was used for post hoc analysis. P values of <.05 were accepted as statistically significant. RESULTS. The general nanostructures of the samples were composed of small spherical entities stacked atop one another in dendritic form. All groups also displayed different hardness values depending on the manufacturing technique. The annealing procedure and environment directly affected both the nanostructure and hardness of the Co-Cr alloy. Group III exhibited a non-homogeneous structure and increased hardness ($48.16{\pm}3.02$ HRC) because the annealing process was incomplete and the inner stress was not relieved. Annealing in argon atmosphere of Group IV not only relieved the inner stresses but also decreased the hardness ($27.40{\pm}3.98$ HRC). The results of fitting function presented that Group IV was the most homogeneous product as the minimum bilayer thickness was measured (7.11 ${\AA}$). CONCLUSION. After the manufacturing with DMLS technique, annealing in argon atmosphere is an essential process for Co-Cr metal ceramic substructures. The dentists should be familiar with the materials that are used in clinic for prosthodontics treatments.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.208-214
• /
• 2000

The formation and dissolution of hydroxides, carbonates and hydroxyapatite (HAp), which depend on the pH of solution, are important factor for the preparation of homogeneous and fine HAp, $Ca_{10-x}(HPO_4)_x(PO_4)_{6-x}(OH)_{2-x}(x=0)$, ceramic powder from the $Ca-PO_4-H_2O$ system. Since the solubility of each complex ion is a linear function of pH, the solubility diagram can be obtained by plotting the logarithmic molar concentrations calculated from the values of the equilibrium constants and solubility products for hydroxides, carbonates, and hydroxyapatite. The optimum pH condition for the formation of single phase $Ca_{10-x}(HPO_4)_x(PO_4)_{6-x}(OH)_{2-x}(x=0)$ powder in $Ca-PO_4-H_2O$ system at $25^{\circ}C$ was estimated as $10.5{\pm}0.5$ through the theoretical consideration. The HAp powder dried at $80^{\circ}C$ showed a fine agglomerated particles with a size of 75 nm. The HAp powder calcined at $1,000^{\circ}C$ consisted of nearly homogeneous particles with a size of 450 nm. Even though the dried HAp particles consisted of agglomeration, mechanical properties were superior due to fine microstructure after sintering.

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.635-647
• /
• 1995

Human polymorphonuclear leukocytes(PMN) constitute a first line of defense against all forms of injury and microbial challenge, which share a common cell lineage with macrophage. Microbial component LPS activates macrophages to produce IL-1, MIP-1${\alpha}$, -1${\beta}$, TNF-${\alpha}$ and IL-6, etc. Those cytokines have autocrine function to the macrophages, and paracrine function to other cell such as PMN and affect them to produce some biological functions. Having a responsive homogeneous cell line, HL-60, offers us the possibility of studying extensively on the function of PMN, which were not possible previously with peripheral PMN, due to the short-lived nature and difficulty of getting a purified PMN. In the present study, I performed MIP-1 receptor binding assay using HL-60 cell and human peripheral PMN. Also, in vitro antimicrobial assay was performed using differentiated or undifferentiated HL-60 cell. Differentiation was induced by treatment with 500 M of $N^6,O^2-dibutyryl$ adenosine 3'5' cyclic monophosphate(dbcAMP) (PMN-like cell), or 20ng/ml of 12-O-tetradecanoylphorbol-13-acetate(TPA) (macrophage/monocyte-like cell). Receptors for MIP-1${\alpha}$ were identified on dbcAMP-treated HL-60 as well as peripheral PMN. However, bound radioactive MIP-1${\alpha}$ on differentiated HL-60 was much higher than that of peripheral PMN, which suggest receptor number of differentiated HL-60 cell is higher than that of peripheral PMN. Although both of TPA and dbcAMP treatment significantly enhanced antimicrobial action of HL-60 cell, dbcAMP-treated cell(PMN-like HL-60) killed S.aureus more effectively in this experiment. TPA or dbcAMP treatment significantly enhanced antimicrobial action of undifferentiated HL-60 cell. MIP-1${\alpha}$ further increased enhancing effect of TPA or dbcAMP. IL-1${\alpha}$, however, increased only dbcAMP-induced enhancing effect of antimicrobial action of HL-60 cell. These results suggest that differentiated HL-60 cell could replace peripheral PMN in analysis of various biological functions of cytokines on PMN cell.