• 한국의학물리학회지:의학물리
• /
• 제2권2호
• /
• pp.141-148
• /
• 1991

수술중 방사선치료는 병소부위를 절제해 낸후 개복된 상태에서 정상조직을 조사면적 밖으로 밀어낸 후 국소재발의 위험이 가장 높은 부위에 전자선을 이용하여 한번에 다량의 방사선을 조사하는 방법이다. 수술중방사선치료를 시행하는 병원마다 콘의 모양, 시행방법, 조사선량등이 모두 달라 사용하는 콘의 선량분포 및 치료면적의 범위, 누설선량등은 치료효과의 중요한 지표가 된다. 저자들은 본 교실에서 지금까지 제작한 여러가지 수술중 방사선치료 콘의 선량분포 특성을 비교 검토하였다.

• 디지털산업정보학회논문지
• /
• 제7권2호
• /
• pp.1-8
• /
• 2011

In this study, software products developed in the course of testing, software managers in the process of testing software test and test tools for effective learning effects perspective has been studied using the NHPP software. The finite failure non-homogeneous Poisson process models presented and the life distribution applied extreme distribution which used to find the minimum (or the maximum) of a number of samples of various distributions. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than automatic error that is generally efficient model could be confirmed. This paper, a numerical example of applying using time between failures and parameter estimation using maximum likelihood estimation method, after the efficiency of the data through trend analysis model selection were efficient using the mean square error.

• 대한기계학회논문집B
• /
• 제31권8호
• /
• pp.672-679
• /
• 2007

The combustion characteristics of a liquefied petroleum gas-di-methyl ether (LPG-DME) compression ignition engine was investigated under homogeneous charge and stratified charge conditions. LPG was used as the main fuel and injected into the combustion chamber directly. DME was used as an ignition promoter and injected into the intake port. Different LPG injection timings were tested to verify the combustion characteristics of the LPG-DME compression ignition engine. The combustion was divided into three region which are homogeneous charge, stratified charge, and diffusion flame region according to the injection timing of LPG. The hydrocarbon emission of stratified charge combustion was lower than that of homogeneous charge combustion. However, the carbon monoxide and nitrogen oxide emission of stratified charge combustion were slightly higher than those of the homogeneous charge region. The indicated mean effective pressure was reduced at stratified charge region, while it was almost same level as the homogeneous charge combustion region at diffusion combustion region. The start of combustion timing of the stratified charge combustion and diffusion combustion region were advanced compared to the homogeneous charge combustion. It attributed to the higher cetane number and mixture temperature distribution which locally stratified. However, the knock intensity was varied as the homogeneity of charge was increased.

• Radiation Oncology Journal
• /
• 제11권1호
• /
• pp.183-191
• /
• 1993

The homogeneous dose planning is one of the most important roles in radiation therapy. But, it is not easy to obtain a homogeneous dose to paranasal sinus region including the ethmoidal sinus with conventional irradiation techniques. In this experimental study, the authors tried to get a homogeneous dose at PNS region, but the nasal cartirage does not exceed the tolerance dose, with anterior-posterior beam and two both lateral wedged beams. Used three fields were shielded with full thickness of blocks to preserve the eye-balls and with blocks of one half value layer to create a homogeneous dose at the whole treatment volume. The dose computations are based on the three dimensonal structure with modified scatter contributions of partial shielders and attenuated beams in 6 MV photon beams. The dose distributions of mid-plane is examined with Kodak verification films and teflon-embedded TLD rod (1 mm diameter and 6 mm length) to confirm the computed dose. In our study, the whole PNS regions have shown within $85{\%}$ of the resultant isodose curves with relatively homogeneous dose distribution. The results of dose computation and measurements are agree well within $5{\%}$ uncertainties.

• Industrial Engineering and Management Systems
• /
• 제12권1호
• /
• pp.46-50
• /
• 2013

In insurance statistics, the sum of homogeneous insurance is often needed. The sum is called individual risk model which is a fundamental model in risk analysis for insurance. This paper first presents an individual risk model based on the uncertainty theory. Then its uncertainty distribution is provided. Finally, its arithmetic is shown by a numerical example.

• 유변학
• /
• 제10권4호
• /
• pp.202-216
• /
• 1998

기존의 'Orthotropic' 근사모델의 개선된 형태인 ORW를 새로운 유동 자료를 이용하여 수치적으로 구하였다. 기존의 'Orthotropic' 근사모델인 ORF나 ORL은 특히 전단유동 하에서 상호작용상수 $C_1$<0.001인 경우 비물리적 진동특성을 나타낸다. 물론 center-gated disk와 같은 비균일 유동하에서도 비물리적 진동특성을 나타내고 'Distribution Function Calculation'과 비교하여 배향 상태를 낮게 예측한다. 이런 현상들은 바로 least-square 최적화 시 사용된 유동 자료에 기인한 것을 알 수 있었다. 작은 상호작용계수의 균일 유동 자료를 이용하여 최적화를 한 ORW의 경우 비물리적 진동특성도 나타나지 않았고 균일 및 비균일 유동하에서 모두 정성적으로 잘 일치함을 확인할 수 있었다. 최적화 시 사용된 함수의 선택은 근사모델을 발전시키는데 그다지 영향을 미치지 못하였다. 하지만, 모든 배향 텐서의 eigenvalue들을 고려하면 보다 정량적으로 발전시킬 수 있지만 이들의 함수모양 선택은 중요하고 어려운 문제다. 비교를 위하여 ORW와 다른 여러 가지 근사모델을 이용하여 Film-gated strip과 Center-gated disk에 대한 연계효과 및 평면속도구배를 포함한 사출성형 충전공정의 수치모사를 수행하였다. ORW가 'Distribution Function Calculation' 과 비교하여 정량적으로도 거의 비슷한 결과를 예측함을 보여주지만 실제 실험자료와 비교하였을 때 약간의 차이가 있음을 확인하였다. 따라서 좀 더 정확히 섬유의 배향도를 예측하기 위해서는 섬유들의 상호작용을 나타내는 항의 모델링의 변화가 요구된다.

• 대한의용생체공학회:의공학회지
• /
• 제18권3호
• /
• pp.261-266
• /
• 1997

Nonevasive multifrequency microwave radiometry using coaxial waveguide antenna has been investigated for a homogeneous and four layer human body model. The coupling between coaxial waveguide antenna and a biological object was analyzed by use of the finite-difference time-domain(FDTD) method to obtain the absorbed power patterns in the media. The object studied in this paper was a homogeneous and four-layered lossy medium. The specific absorption rates(SAR) distribution which was corresponding to the temperature distribution was calculated in each region by use of the steady-state response in FDTD method. The SAR pattern of 1.2GHz was compared with that of 1.8GHz.

• Geomechanics and Engineering
• /
• 제21권1호
• /
• pp.1-9
• /
• 2020

In this article, an analytical solution for the effect of the rotation on thermo-viscoelastic non-homogeneous medium with a spherical cavity subjected to periodic loading is studied. The distribution of displacements, temperature, redial stress, and hoop stress in non-homogeneous medium, in the context of generalized thermo-viscoelasticity using the GL theory, is discussed and obtained. The results are displayed graphically to illustrate the effect of the rotation. Comparisons with the previous work in the absence of rotation and viscosity are made.

• 소성∙가공
• /
• 제27권4호
• /
• pp.222-226
• /
• 2018

Severe plastic deformation (SPD) is a promising method for drastically enhancing the mechanical properties of the materials by grain refinement of metallic materials. However, inhomogeneous deformation during the SPD process results in the inhomogeneous microstructure of the SPD-processed material. We manufactured cylindrical copper specimens of 42 mm in diameter with ultrafine grains (UFG) using an equal channel angular pressing (ECAP) to figure out the relationship between homogeneous microstructure and the number of the processing passes. Two specimens, which are ECAP-processed 4 times (4pass) and 6 times (6pass) each with Route Bc, are prepared for comparison of mechanical properties and microstructure. The results show that the mechanical properties of the two specimens (4pass and 6pass) are similar. Moreover, both the specimens show highly enhanced mechanical properties. The 4pass specimen, however, shows inhomogeneity in hardness distribution, while the 6pass specimen shows a homogeneous distribution. Microstructure analysis reveals that the 4pass specimen has an inhomogeneous microstructure with incompletely refined grain structure. This inhomogeneity of the 4pass specimen could be explained by the circumferential rotation during ECAP process.

• Nuclear Engineering and Technology
• /
• 제28권3호
• /
• pp.311-319
• /
• 1996

We reconstruct the assembly pinwise flux using several types of boundary conditions and confirm that the reconstructed fluxes are the same with the reference flux if the boundary condition is exact. We test EPRI-9R benchmark problem with four boundary conditions, such as Dirichlet boundary condition, Neumann boundary condition, homogeneous mixed boundary condition (albedo type), and inhomogeneous mixed boundary condition. We also test reconstruction of the pinwise flux from nodal values, specifically from the AFEN [1, 2] results. From the nodal flux distribution we obtain surface flux and surface current distributions, which can be used to construct various types of boundary conditions. The result show that the Neumann boundary condition cannot be used for iterative schemes because of its ill-conditioning problem and that the other three boundary conditions give similar accuracy. The Dirichlet boundary condition requires the shortest computing time. The inhomogeneous mixed boundary condition requires only slightly longer computing time than the Dirichlet boundary condition, so that it could also be an alternative. In contrast to the fixed-source type problem resulting from the Dirichlet, Neumann, inhomogeneous mixed boundary conditions, the homogeneous mixed boundary condition constitutes an eigenvalue problem and requires longest computing time among the three (Dirichlet, inhomogeneous mixed, homogeneous mixed) boundary condition problems.