• 제목/요약/키워드: Hollow-fiber

검색결과 629건 처리시간 0.028초

Hollow Fiber Recycle Reactor를 이용한 알콜연속 발효 (Continuous Alcohol Fermentation by Cell Recycling Using Hollow Fiber Recycle Reactor)

  • 이시경;박경호;백운화;장호남
    • 한국미생물·생명공학회지
    • /
    • 제14권2호
    • /
    • pp.193-198
    • /
    • 1986
  • Sacch. cerevisiae var. ellipsoideus 균주를 이용산업용 천연맥즙배지를 사용한 알콜연속 발효시 Hollow Fiber Recycle Reactor를 of용 Cell Recycle을 시켜 발효조내의 알콜 생산성을 높이기 위해 본 실험을 실시하였으며, 특히 Batch식과 연속발효시 HFR유무에 따른 특성을 비교 검토한 결과를 요약하면 다음과 같다. 1 Dilution rate가 0.1h$^{-1}$일때 11$^{\circ}$P 및 15$^{\circ}$P media를 이용한 알콜 연속발효에서 알콜농도는4.71% 및 5.82%(v/v) 이었으며 이때의 발효율은 각각 86.2%와 78.6 % 이었다. 2. HFR연속발효에서 D=0.1h$^{-1}$일때 알콜농도는 7.64% (v/v)로 높았으며, 이때의 생산성은 6.1g/l/h이었다. 또한 D=0.2h$^{-1}$일때 알콜농도와 생산성은 각각 7.62%(v/v) 및 12.2g/l/h/이었다. 3. HFR연속발효에서 D=0.3h$^{-1}$일때 알콜농도가 7.54% (v/v) 이었으며 알콜생산성은 18.1g/l/h 이었다. 4 알콜 생산성 비교에서 HFR 연속발효는 연속발효에 비해 4배의 증가효과가 있었으며 Batch발효에 비해서는 16.3배나 크게 증가하였다.

  • PDF

Ba0.5Sr0.5Co0.8Fe0.2O3-δ 중공사 분리막의 제조 및 물성 (Fabrication and Property of Ba0.5Sr0.5Co0.8Fe0.2O3-δ Hollow Fiber Membranes)

  • 전성일;박정훈;김종표;심우종;이용택
    • Korean Chemical Engineering Research
    • /
    • 제50권1호
    • /
    • pp.1-5
    • /
    • 2012
  • 외경 1.02 mm, 내경 0.437 mm를 갖는 $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ 중공사를 상전이 방적기술로 제조하였다. 초기 $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ 선구 분말은 착체중합법을 이용하여 합성하였고, $900^{\circ}C$에서 하소하였다. 합성한 분말을 고분자 용액에 분산시킨 후 이중관형 노즐을 통해 중공사를 사출하였다. 최종적으로 산소분리에 사용 가능한 치밀 $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ 중공사막을 $1,080^{\circ}C$에서 2 시간 동안 소결하여 얻을 수 있었다. 또한 0.58 mm의 매우 얇은 분리막임에도 불구하고, BSCF 중공사 분리막은 602.5 MPa의 적당한 기계적 강도를 유지하였다.

페놀수지/알루미나 복합 활성탄소중공사막을 이용한 응축성 기체 분리 (Condensable Gas Separation using Phenol! Alumina Composite Activated Carbon Hollow Fiber Membranes)

  • 신경용;박유인;김범석;구기갑
    • 멤브레인
    • /
    • 제20권4호
    • /
    • pp.312-319
    • /
    • 2010
  • 탄소막은 고분자막에 비해 높은 선택성과 투과성, 열적, 화학적 안정성을 가지고 있어 기체 분리, 특히 휘발성 유기화합물(VOCs) 분리막으로 많은 관심을 받고 있다. 활성탄소중공사막은 기공 표면(pore wall)에 형성된 흡착성 미세기공에 의해 선택적으로 응축성 성분이 흡착, 확산되는 흡착-확산 기구에 의해 흡착성-비흡착성 물질이 분리된다. 본 연구에서는 다공성 알루미나 중공사막 지지체에 phenolic resin (novolac type)을 코팅한 후 산화, 탄화 및 활성화 등의 열분해 과정을 통해 막 표면과 기공 표변에 흡착성 미세기공이 형성된 활성탄소중공사막을 제조하였다. 또한 열분해 조건에 따른 phenol/alumina 복합 활성탄소중공사막의 물리적 특성과 기체 투과특성에 대해 살펴보았다. 그 결과, 제조된 phenol/alumina 복합 활성탄소중공사막이 휘발성 유기물질의 대부분을 차지하고 있는 탄화수소를 선택적으로 분리 회수하는데 매우 효과적인 특성을 갖고 있음을 확인할 수 있었다. 따라서 본 연구에서 개발된 phenol/alumina 복합 활성탄소중공 사막은 VOCs의 분리, 농축에 매우 효과적으로 활용 가능할 것으로 기대된다.

나노 크기의 Fumed Silica가 함유된 Polysulfone 한외여과 중공사막 제조 및 내오염성 분석 (Preparation of Polysulfone Composite Ultrafiltration Hollow Fiber Membranes Incorporating Nano-size Fumed Silica with Enhanced Antifouling Properties)

  • 강예솔;임주환;김인수
    • 멤브레인
    • /
    • 제28권6호
    • /
    • pp.379-387
    • /
    • 2018
  • 본 연구에서는 한외여과 polysulfone (PSf) 중공사막에 첨가제를 섞는 방법을 통해 친수성 증가에 따른 분리막 특성 및 성능을 향상하고자 하였다. 15 nm 크기의 fumed silica (FS)를 0.1, 0.3, 0.5 wt%로 방사 용액에 분산시켜 혼합 매트릭스 분리막을 제조하였다. 단면 및 표면상태를 확인하기 위해 SEM 분석을 진행하였으며, FS가 함유될수록 중공사막의 평균 기공 반경이 4 nm 이상 증가하는 것을 확인하였다. 또한, 분리막의 친수성 분석을 위해 접촉각 측정을 진행하였으며, FS 함유로 분리막의 친수성이 높아진 것을 확인하였다. 수투과도의 경우 FS가 섞인 분리막은 91~96 LMH 수준을 보였으며 PSf 분리막보다 5~11%의 증가율을 보였다. 내오염성 평가에서도 친수도가 상승한 FS 혼합 중공사막 표면에 소수성을 띄는 BSA가 흡착되지 못하여 상대 유량 감소율이 PSf 단일막 보다 낮아졌음을 확인하였다.

분리막 종류에 따른 하수의 생물학적 고도처리 효율 비교 연구 (Comparison of Biological Nutrient Removal Efficiencies on the Different Types of Membrane)

  • 박종부;신경숙;허형우;강호
    • 한국물환경학회지
    • /
    • 제27권3호
    • /
    • pp.322-328
    • /
    • 2011
  • This study was performed to investigate the characteristics of nutrient removal of municipal wastewater in the membrane bioreactor system with the different types of membrane. Membrane bioreactor consists of three reactors such as two intermittent anaerobic and the submerged membrane aerobic reactor with flat sheet and hollow fiber membrane, respectively. The removal efficiencies of $COD_{cr}$, BOD, SS, TN and TP on the flat sheet membrane bioreactor were 94.3%, 99.0%, 99.9%, 70.3% and 63.1%, respectively. In addition, The removal efficiencies of $COD_{cr}$, BOD, SS, TN and TP on the hollow fiber membrane bioreactor were 94.0%, 99.3%, 99.9%, 69.9% and 66.9%, respectively. The estimated true biomass yield, specific denitrification rate (SDNR), specific nitrification rate (SNR) and phosphorus removal content on the flat sheet membrane bioreactor were $0.33kgVSS/kgBOD{\cdot}d$, $0.043mgNO_3-N/mgVSS{\cdot}d$, $0.031mgNH_4-N/mgVSS{\cdot}d$, and 0.144 kgP/d, respectively. In addition, the estimated true biomass yield, specific denitrification rate (SDNR), specific nitrification rate (SNR) and phosphorus removal content on the hollow fiber membrane bioreactor were $0.30kgVSS/kgBOD{\cdot}d$, $0.067mgNO_3-N/mgVSS{\cdot}d$, $0.028mgNH_4-N/mgVSS{\cdot}d$, and 0.121 kgP/d, respectively. There was little difference between the flat sheet and hollow fiber on the nutrient removal efficiencies except SNR and SDNR. These differences between them were caused by the air demand to prevent the membrane fouling. The flux and oxygen demand for air scouring were $19.0L/m^2/hr$ and $2.28m^3/min$ for the flat sheet membrane, and $20.7L/m^2/hr$ and $1.77m^3/min$ for the hollow fiber membrane on an average.

Simulation of the Structural Parameters of Anti-resonant Hollow-core Photonic Crystal Fibers

  • Li, Qing;Feng, Yujun;Sun, Yinhong;Chang, Zhe;Wang, Yanshan;Peng, Wanjing;Ma, Yi;Tang, Chun
    • Current Optics and Photonics
    • /
    • 제6권2호
    • /
    • pp.143-150
    • /
    • 2022
  • Anti-resonant hollow-core photonic crystal fiber (AR-HCF) has unique advantages, such as low nonlinearity and high damage threshold, which make it a promising candidate for high-power laser delivery at distances of tens of meters. However, due to the special structure, optical properties such as mode-field profile and bending loss of hollow-core fibers are different from those of solid-core fibers. These differences have limited the widespread use of AR-HCF in practice. In this paper we conduct numerical analysis of AR-HCFs with different structural parameters, to analyze their influences on an AR-HCF's optical properties. The simulation results show that with a 23-㎛ air-core diameter, the fundamental mode profile of an AR-HCF can well match that of the widely used Nufern's 20/400 fiber, for nearly-single-mode power delivery applications. Moreover, with the ratio of cladding capillary diameter to air-core diameter ranging from 0.6 to 0.7, the AR-HCF shows excellent optical characteristics, including low bending sensitivity while maintaining single-mode transmission at the same time. We believe these results lay the foundation for the application of AR-HCFs in the power delivery of high power fiber laser systems.

소수성 중공사 모듈에 의한 액-액 추출에 관한 연구 (A Study on the Liquid-Liquid Extraction by Use of Hydrophobic Hollow Fiber Module)

  • 김영일;박동원
    • 공업화학
    • /
    • 제7권2호
    • /
    • pp.237-244
    • /
    • 1996
  • 미세공의 중공사 모듈을 이용한 액-액추출은 단위부피당 표면적이 크므로 기존 추출장치들에 비해 신속히 진행된다, 모듈내에서 추출제와 원료액은 빠른 속도로 접촉하며 두 흐름이 완전히 독립적이므로 부하나 편류현상이 일어나지 않는다. 본 연구에서는 소수성 중공사 모듈을 사용하여 수용액 중에 미량으로 존재하는 Fe(II)와 Ni(II)을 추출하기 위해 TOA 및 EHPNA를 추출제로 사용하여, 그 추출선택성을 고찰하였다. 또한, 중공사 모듈에서의 율속단계를 결정하기 위해 막 내 외부 유속의 영향을 검토하였다. 이로부터, 소수성 중공사 내에서 분배계수가 큰 계에 대한 추출조작의 경우는 막내부에서의 물질전달과정이 총괄물질전달을 지배함을 확인하였으며, 본 연구를 통한 $K_w$와 소수성 중공사 내부유속 $v_t$와의 상관관계는 $K_w{\frac{d}{D}}=6.22\(\frac{d^2v_t}{LD}\)^{1/3}$과 같았다. 반면, 분배계수가 낮은 경우, 세공 내에서의 추출반응이 원활하지 못하기 때문에 막내부 저항의 영향이 막저항의 영향보다 작았다. 따라서, 분배계수가 큰 계에서는 소수성 막을 사용하는 것이 효과적임을 예측할 수 있었다.

  • PDF

중공 원통형 광섬유 하이드로폰의 감도 해석 (Sensitivity Analysis of Fiber Optic Hydrophone for Hollow Cylindrical Mandrel)

  • 김정석;윤형규;설재수;남성현
    • 소음진동
    • /
    • 제9권3호
    • /
    • pp.565-569
    • /
    • 1999
  • Recently, fiber optic hydrophone is a subject which has attracted as a underwater acoustic sensor. In this study, Finite element modeling of fiber optic hydrophone for hollow cylindrical mandrel was performed and the acoustic sensitivity was calculated to estimate the performance of single element fiber optic hydrophone. And acoustic sensitivity was measured in acoustic water tank to verify the result of simulation. The result of FE analysis and experiment is -126 dB re rad/$\mu$ Pa and -128 dB re rad/$\mu$ Pa respectively.

  • PDF