• 터널과지하공간
• /
• 제27권6호
• /
• pp.366-376
• /
• 2017

가행광산 지반침하 실태조사를 통하여 현 채광방법에 따른 지반침하 가능성과 대책을 분석하였다. 금속광산은 대부분 휴 폐광 상태로서 싱크홀의 침하양상을 나타내고 있다. 석탄광은 점점 더 심부화 되어가고 있으며, 기존 채광지역에서 트러프형의 침하양상을 보였다. 비금속 광산은 대규격 광산개발 이력이 30년 이내로서 크고 작은 지반변형의 문제가 조사되었다. 채광 또한 기술적 방법보다 경험적인 방법에 더 의존함으로써 시간 의존성에 따른 지반침하 가능성이 상존하였다. 따라서 비금속 광산 위주의 체계적인 개발방법과 지반침하 방지에 대한 다양한 연구가 수행 되어야 할 것으로 본다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.178-185
• /
• 2011

The micro-perforated panel absorber (MPPA) is one of promising noise control elements because of its applicability to extreme environments where general porous materials cannot be used. Since the MPPA is inherently non-porous sound absorber, it can be a good candidate of acoustic protection system of a space launcher. The overall sound pressure level inside payload fairings of commercial launch vehicles is so high (around 140 dB OASPL) that the conventional linear impedance model cannot be directly applied to the design of the acoustic protection systems. In this paper an acoustic impedance models of a micro-perforated panel absorber at high sound pressure environment were reviewed and the use of the impedance on the practical design of MPPAs was addressed. The variation of absorption characteristics of MPPA was discussed according to the design parameters, e.g., perforation ratio, the minute hole diameter, the thickness of MPP and the incident sound pressure level.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.597-598
• /
• 2006

In this study, we used the ESD method to prepare the protein microarrays for observation the stem cell responses to pattern size, space and shapes. The ESD method allows a reduction in spot size, high efficiency of substance transfer, and high rate in fabrication as a result of ability to simultaneously deposit thousands of identical spots. Typical electro spraying conditions for the deposition of proteins were a voltage of $3{\sim}5keV$ and the humidity under 30%. The patterns of masks have a variety of shapes, spaces, and hole sizes from 10 um to $300{\mu}m$. Three kinds of proteins(collagen, fibronectin, and vitronectin dissolved in PBS) are deposited in a dry state, preserving the functional activity of proteins. Stem cells were cultured on each protein patterned sample at $37^{\circ}C$ for 1day.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1049-1052
• /
• 2002

The aligning between the punch and die governs no only the burr formation characteristics but also the life time of the punch and die in the sheet metal blanking process. There are many ways to adjust the two elements in the general punching systems but in the case of micro punch system, the punch size is reduced to a few tenth of micrometer range and the general aligning methods are almost impossible to apply. The image processing is the most widely used method in micro punch aligning, but in order to apply the method, it needs quite a large space for visionary system to approach the punch-die aligning zone. In this paper, the new punch-die aligning method with using the total capacitance between the punch and die hole is proposed. In this method, the tip surface of the punch tool locates at the same plane of the die surface and the capacitance variation between the two elements are measured. When the center of the two elements are coincided, the capacitance is minimized, but when the align Is changed to any direction, the capacitance between the two elements increase. In order to verify the feasibility of this method, the aligning and punching tests was performed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.571-578
• /
• 2009

Recently, micropiling techniques are increasingly applied in foundation rehabilitation/underpinning and seismic retrofitting projects where working space provides the limited access for conventional piling methods. Micropiling techniques provide environmental-friendly methods for minimizing disturbance to adjacent structures, ground, and the environment. Its installation is possible in restrictive area and general ground conditions. The cardinal features that the installation procedures cause minimal vibration and noise and require very low ceiling height make the micropiling methods to be commonly used for underpin existing structures. In the design point of view, the current practice obligates the bearing capacity of micropile to be obtained from skin friction of only rock-socketing area, in which it implies the frictional resistance of upper soil layer is ignored in the design process. In this paper, a new micropiling method and its verification studies via field installation are presented. The new method provides a specific way to grout bore-hole to increase frictional resistance between surrounding soil and pile-structure and it allows to consider the skin friction of micropiles for upper soil layer during design process.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.276-285
• /
• 2006

Development and numerical implementation for an elastoplastic constitutive model for anisotropic and asymmetric materials are presented in this paper. The Coulomb-Mohr yield criterion was modified to consider both the anisotropic and asymmetric properties. The modified yield criterion is an isotropic function of the principal values of a symmetric matrix which is linearly transformed from the Cauchy stress space. In addition to the constitutive equation, the numerical treatment for the singularity in the vertex region of yield surface and stress integration algorithm based on elastoplasticity were presented. In order to assess the accuracy of numerical algorithm, isoerror maps were considered. Also, extension of a strip with a circular hole was simulated and results compared with those obtained using the (smooth) Mises yield criterion to validate stress output for a complex stress state.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.534-537
• /
• 2002

We have studied conduction mechanism that is interpreted in terms of space charge limited current (SCLC) region and tunneling region. The OLEDs are based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD) as a hole transport, tris (8- hydroxyquinolinoline) aluminum(III) $(Alq_3)$ as an electron injection and transport and emitting later, copper phthalocyanine (CuPc) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and poly(vinylcarbazole) (PVK) as a buffer layer respectively. Al was used as cathode. We manufactured reference structure that has in ITO/TPD/$Alq_3$/Al. Buffer layer effects were compared to reference structure. And we have analyzed out luminance efficiency-voltage characteristics in ITO/Buffer layer/TPD/$Alq_3$/Al with buffer-layer materials.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.205-210
• /
• 2017

무선 센서 네트워크는 환경 모니터링, 감시 시스템, 무인 우주 탐사 등의 다양한 분야에서 활용 가능하다. 하지만 노드의 부적절한 배치로 인해 센싱할 수 없는 지역이 생기거나 특정 지역에 노드가 과도하게 중복 될 수도 있다. 이는 데이터 수집을 어렵게 하고, 에너지 낭비를 야기할 수 있다. 본 논문에서는 노드 재배치를 통해 이러한 배치 문제를 해결한다. 먼저 중복 배치된 노드를 찾고, 이 노드들을 센싱할 수 없는 지역으로 옮겨서 최대한 넓은 지역을 센싱할 수 있도록 한다. 본 논문에서는 이를 위해 필요한 효율적인 알고리즘을 제안하고 시뮬레이션을 통해 제안 방법을 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.582-588
• /
• 1999

정보화 사회의 발전과 함께 멀티미디어에 대한 관심이 집중되고 있으며, 점유 공간이 작고 가벼우며 대면적이 가능한 정보 표시 디스플레이에 대한 기술은 고부가가치 산업으로 인식되어 지고 있다. 이러한 정보 표시 디스플레이들 중, 전기 발광 소자 (Electroluminescence Display : ELD), 액정 표시 디스플레이 (Liquid Crystal Display LCD), 플라즈마 디스플레이 (Plasma Display Panel) 등의 대한 연구가 세계적으로 매우 활발하게 진행되고 있다. 본 연구에서는 란탄 계열의 금속 착 화합물인 Tb(ACAC)$_3$(Phen)과 Tb(ACAC)$_3$(Phen-Cl)를 이용해 다비이스를 제작한후 광학적 및 전기적 특성을 조사하였다. 또한 luminous efficiency와 cyclic voltametric 방법을 이용해 에너지 밴드로 두 발광 물질인 Tb(ACAC)$_3$(Phen)과 Tb(ACAC)$_3$(Phen-Cl)을 비교.분석하였다. 본 연구의 디바이스 구조를 보면 anode/hole transporting layer (HTL)/emitting material layer (EML)/electron transporting layer (ETL)/cathode와 같고 ETL를 aluminum-tris- (8-hydroxyquinoline) (Alq$_3$)와 bis(10-hydroxybenzo(h)quinolinato)beryllium (Bebq$_2$)를 사용하였으며 HTL 로 N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD)를 사용하였다.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1499-1507
• /
• 2003

Physical importance of cutting temperatures has long been recognized. Cutting temperatures have strongly influenced both the tool life and the metallurgical state of machined surfaces. Temperatures in drilling processes are particularly important, because chips remain in contact with the tool for a relatively long time in a hole. Tool temperatures tend to be higher in drilling processes than in other in machining processes. This paper concerns with modeling of thermal behaviors in drilling processes as well as estimation of the cutting temperature distribution based on remote temperature measurements. One- and two-dimensional estimation problems are proposed to analyze drilling temperatures. The proposed thermal models are compared with solutions of finite element methods. Observer algorithms are developed to solve inverse heat conduction problems. In order to apply the estimation of cutting temperatures, approximation methods are proposed by using the solution of the finite element method. In two-dimensional analysis, a moving heat source according to feedrate of the drilling process is regarded as a fixed heat source with respect to the drilling location. Simulation results confirm the application of the proposed methods.