• Journal of The Korean Astronomical Society
• /
• v.34 no.3
• /
• pp.129-135
• /
• 2001

We report results from an analysis of the X-ray archival data on MCG-2-58-22 obtained with Ginga, ROSAT and ASCA. By analyzing both short- and long-term light curves, we find clear time variations, ranging widely from, $\~10^3$ s to more than several years, in the X-ray energy range 0.1 - 10 keV. In addition, a flare is detected in 1991, overlaid on a gradual, secular flux decrease from 1979 to 1993; this flare has a time scale of about 1 year, and the X-ray flux increased by at least a factor of 3. The implications of these observational results are discussed in terms of accretion flow dynamics near a supermassive black hole.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.125-137
• /
• 2000

In this paper we propose a new approach to the development of the automatic vision system to examine and repair the steam generator tubes at remote distance. In nuclear power plants workers are reluctant of works in steam generator because of the high radiation environment and limited working space. It is strongly recommended that the examination and maintenance works be done by an automatic system for the protection of the operator from the radiation exposure. Digital signal processors are used in implementing real time recognition and examination of steam generator tubes in the proposed vision system. Performance of proposed digital vision system is illustrated by simulation and experiment for similar steam generator moldel.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2008.03a
• /
• pp.5-5
• /
• 2008

Spinoglenoid cyst of the shoulder is a rare clinical entity and several treatment modalities have been reported. Recently, arthroscopy is effectively used via communication hole or posterior capsulotomy through the glenohumeral joint. With this method, the complete cystectomy is impossible if the cyst is a large size or extended anteriorly and there are few reports about such cases. We present extra-articular complete cystectomy through bursal space in 3 cases of huge and anteriorly extended spinoglenoid cysts. All patients were able to return to work with no restrictions and 2 patients who performed the follow up MRI demonstrated complete resolution of the cyst and some recovery of the mass of infraspinatus muscle.

• Tunnel and Underground Space
• /
• v.7 no.4
• /
• pp.267-273
• /
• 1997

Rock fragmentation with plasma blasting technique has advantageous properties in contrast to the conventional blasting method in controlling of flying rocks and ground vibrations, when residents are complaining or surrounding structures stay in protection from blasting operations. The experiences show in urban construction works that the plasma blasting is the most possible method to prevent damages and minimize adverse environmnetal impacts. The fragmentation energy level is evaluated by numerical simulation using PFC-2D for various drill hole pattern and tested accordingly to get the feasibility. The energy output of plasma blasting system has been improved to a level of 1 MJ, which can break a 2~3 ㎥ granite boulder or 1.5 m height bench face. Measurements are carried out to get the ground vibration level and propagation equation, so that the control of the blasting operations can be performed more precisely and safely.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.1
• /
• pp.11-15
• /
• 2007

Composite materials are widely used to make all kinds of machine parts, internal and structural materials of cars, aerospace components, building structures, ship materials, sporting goods and others, It is worth while to use composite space substitute material in various applications when compared with others. But the use of composite material is limited in the field of the mechanical processing because of the difficulties in processing. Thus, it is proved that the surface is rough at the in and out sections of the hole processing when the GFRP is machined with HSS drill in the vertical machining center. And it is observed that the more it is processed, the more the fluid type long chip is changed into the powdered chip.

• Tunnel and Underground Space
• /
• v.7 no.3
• /
• pp.221-229
• /
• 1997

Disc-type and ring-type specimens of four different materials were tested to investigate the tensile characteristics and their brief results are presented. Materials tested were marble, granite, cement mortar and plaster. Unizxial tensile strengths are compared with Brazilian and ring test strengths. It was found that Brazilian strengths were usually greater than uniaxial tensile strengths and affected by loading rates. In the ring tests, tensile strengths were generally found to be decreased as relative hole radius being increased. Ring test strengths, however, converged to some value in r$\geq$0.45 of marble, r$\geqq$0.29 of cement mortar and r$\leq$0.5 of plaster specimens. In such range of r, furthermore, transverse cracking of specimens were observed.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.158-167
• /
• 1999

Heat and moisture transfer associated with porous materials are investigated. The heat and moisture transfer in porous materials caused by the interaction of moisture gradient, temperature gradient, conduction, and evaporation are considered. The variations of temperature and moisture not only change the volume but also induce the hygro-thermal stress. The finite element formulation for solving the temperature and moisture transfer as well as the associated hygro-thermal stresses is developed. In order to verify the finite element formulation, the heat and moisture moving boundary problem in a half space and the hygro-thermo-mechanical problem in an infinite plate with a circular hole are analyzed. Temperature profile, moisture profile, and hygro-thermal stresses are compared with those of analytic solution and other investigator. Good agreements are examined

• Journal of Korean Neurosurgical Society
• /
• v.41 no.1
• /
• pp.43-46
• /
• 2007

Hypoglossal neurilemmoma is extremely rare. Intracranial hypoglossal neurilemmoma has been reported to the present most commonly as a space-occupying lesion with symptoms of raised intracranial pressure. A 68-year-old women presented with deviation of the tongue to the left on protrusion. Preoperative radiological images revealed an extra-axial mass in and around the hypoglossal canal. The tumor was totally resected via retrosigmoid suboccipital approach with burrhole craniectomy. Histopathological examination verified a neurilemmoma. She had no neurologic abnormality except hypoglossal palsy which recovered completely in six months. Retrosigmoid suboccipital approach with burrhole craniectomy can be an useful approach in intracranial hypoglossal neurilemmoma without extracranial extension or with minimal extracranial extension into the hypoglossal canal.

• Tribology and Lubricants
• /
• v.9 no.1
• /
• pp.55-61
• /
• 1993

Recently, due to the erosion damage that were generated increasingly at alloy metals of slide bearing by cavity of lubricating oil with tendency of high speed and high output of reciprocating engine, there is a need to study the process on the formation of cavitation erosion, and the characteristic of cavitation erosion at lubricating oil environments under various condition for marine ship. Therefore, the apparatus of cavitation erosion experiment used 20 KHz, $24 \mu m$ piezoelectric vibrator. The main results obtained through this test method are as follows: 1. The max. erosion rate at lubricating oil environments was related to the change of space, oil film thickness, and shown to tendency of gear oil>system oil>turbine oil>mixed oil environments with different viscosity. 2. The pitted hole by cavitation erosion at high viscosity oil environments became small and deep, and in addition to, they appeared to be wide and shallow at low viscosity.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.27-30
• /
• 1997

1. Introduction : Molecular diffusion of small molecules in polymers plays an important role in many areas where polymers are acting as barriers, and in separation processes, such as selective diffusion. Different applications of polymers have different requirements on their transport properties. Therefore, reliable predictions of diffusion coefficients for small molecules in polymeric materials could be a useful tool to design appropriate materials. For many years, the theories based on free-volume concepts have been widely used to correlate and predict diffusion behavior in polymer/solvent systems. In the theory derived by Vrentas and Duda, the empty space between molecules that is available for molecular transport, referred to as hole free-volume, is being redistributed. Molecular transport will occur only when a free-volume of sufficient size appears adjacent to a molecule and the molecule has enough energy to jump into this void. The diffusive jump is considered complete when the void left behind is closed before the molecule returns to its original position. In this paper, the Vrentas-Duda free-volume theory is presented and the methods to estimate free-volume parameters for predicting polymer/ solvent diffusion coefficients are described in detail.