• 한국식품조리과학회지
• /
• 제20권2호
• /
• pp.211-218
• /
• 2004

The issue of safety and quality of cooked food served at foodservice institutions has brought more attention to food scientists because the foodservice system is growing and becoming more popular in Korea. In order to control the quality and safety of cooked foods, the production and holding methods of foods should be carefully studied and the implications considered by the foodservice industry. Therefore, studies on microbiological, nutritional, physicochemical and sensory quality are essential in this area. The purpose of the present study was to evaluate the chemical and microbial qualities of salads during holding. Several holding temperatures in the range of 5∼26$^{\circ}C$ were used for holding. Chicken salad and ham ＆ cucumber salad exceeded the standard after 30min of room temperature holding after preparation. Quality deterioration increased at higher holding temperatures, which suggested that refrigerator holding is the most desirable.

• 한국식품조리과학회지
• /
• 제20권4호
• /
• pp.352-357
• /
• 2004

This study was performed to predict the multiplication growth patterns of Salmonella typhimurium according to the holding methods and times in cooked foods served at foodservice institutions. When simmered pork in soy sauce and ham and cucumber salad were inoculated with S. typhimurium (7.00 logCFU/g) and tested according to holding methods and times, room temperature holding showed a continuous increase in S. typhimurium count as time passed, whereas 80$^{\circ}C$ heating table sharply reduced the count to 4.00 (logCFU/g) after 2hrs of holding and to zero after 6hrs, which suggested that all S. typhimurium were destroyed. However, 5$^{\circ}C$ refrigerator holding showed a count increase, although it wasis still lower than that at room temperature and at 10$^{\circ}C$ cold table holding, which suggested that S. typhimurium is comparatively resistive to low temperature.

• 한국식생활문화학회지
• /
• 제11권4호
• /
• pp.465-473
• /
• 1996

The purpose of this study was to evaluate microbiological hazards in the steps of production, transportation and selling of hamburger and sandwich that were marketed in CVS, then to identify methods of control. The reasults are as follows: As the reasult of operation surroundings of manufacturerand reserch of circulation, $4{\sim}6$ hours are needed from manufacturer to CVS. Also transportation car mean temperature was $10^{\circ}C$ which exceeds the standard of $7^{\circ}C$ or below. Hamburger: Critical control points identified were purchasing, cooking, post-preparation, transportation and holding at CVS. As the reasult of microbial analysis following the case of holding methods and reheating at CVS, microbes of cold holding and reheat after cold holding was within standard value. But in the case of room temperature microbes exceeded standard value. Sandwich: Critical control points identified were purchasing, cooking, post-preparation, transportation and holding at CVS. As the reasult of microbial analysis following the case of holding methods and reheating at CVS, total plate counts of cold holding and reheat after cold holding was within standard value. But in the case of room temperature holding after 24 hours total plate counts exceeded standard value. In the case of room temperature holding the number of microbes increased according to the passage of time. As a reasult of food poisoning bacteria, it was negative in every test in sample against V. parahaemolyticus, Salmonella, S. aureus.

• 한국식품조리과학회지
• /
• 제19권5호
• /
• pp.631-639
• /
• 2003

In order to control the quality and safety of cooked foods, production and holding methods of foods should be carefully studied and applied to the foodservice industry. Therefore studies on microbiological, nutritional, physicochemical and sensory quality are essential in this area. The purpose of this study was to evaluate the chemical and microbial qualities of cooked foods during preparation and holding From the results, the following guidelines should be adhered to give effective quality control when holding foods after cooking in foodservice institutions, as well as to provide quality foods when selling cooked foods at commercial establishments. Sauteed and simmered foods such as sauteed chicken meat & vegetables and simmered pork in soy sauce satisfy the standard for microorganisms till 1-3 hours of room temp. holding, 6-18 hours at 60$^{\circ}C$ steam table, and 12-18 hours at 80$^{\circ}C$ heating table.

• 디지털융복합연구
• /
• 제9권1호
• /
• pp.107-114
• /
• 2011

In order to have the highest level of a certain society's technology be evaluated as digital contents technology the value concept of such technology's social utilization must be established while active investment on the technology takes place and makes it the subject of social capitalization. This study wishes to discuss the strategies and methods of establishing and managing IP holding company which requires business activation with digital contents technology at its base, research ways of vitalizing IP holding company to expand social utility values of contents technology, suggest necessary systemic improvements and investment activation methods, management structure, and governance structure by investigating ways to stimulate the industrialization of contents technology through the establishment and management of this IP holding company, and finally come up with a realistic measure to establish and manage a IP holding company. Strategies on commercialization of digital contents technology and acceleration of technology development, as well as activation of venture business set-ups will be analyzed and suggested based on such suggestions while IP holding company's digital contents technology investment activation model will be established to produce means to realize discovering superior contents companies and activation of investment, and activating high quality contents production for the global market.

• 한국식품조리과학회지
• /
• 제20권1호
• /
• pp.34-41
• /
• 2004

The retention rate of riboflavin in two cooked vegetable salads (spinach salad and sesame leaf salad) were examined at every cooking stage, holding temperature and holding time, with various cooking methods, and a better food preparation method developed. The riboflavin contents of the samples were analyzed by HPLC, with fluoresence detection. The changes in the pH and water contents of the samples were measured during the holding stage at various temperatures and times. There were significant differences in the riboflavin contents during the various preparation and cooking processes, such as trimming, washing, boiling and parching etc. The retention rates of the riboflavin with the various holding methods and cooking temperature were also significantly different. The boiling process caused large losses of riboflavin: in the cases of spinach salad and sesame leaf salad these were 78％ and 52％ respectively. The pH and water contents showed faster change during 0-6 hours than during 6-12 hours.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권10호
• /
• pp.1642-1655
• /
• 2020

Objective: The aim of this study is to characterize the impact of additional electrical stimulation (AES) and various pre-rigor holding temperatures (for 3 h) on the ageing-potential of hot boned bovine M. longissimus lumborum (LL). Methods: Paired LL loins from 12 bulls were hot-boned within 40 min of slaughter, immediate AES applied and subjected to various holding temperatures (5℃, 15℃, 25℃, and 35℃) for 3 h. Results: AES did not accelerate the rate of rigor attainment, but the 3 h pre-rigor holding temperature did. Shear force values decreased as the pre-rigor holding temperatures increased. AES and holding for 3 h (at 25℃) resulted in higher water-holding capacity. Conclusion: Data confirmed that AES did not influence the various meat quality parameters in the present study, but pre-rigor holding temperature (25℃) alone or in combination with AES resulted in superior meat quality.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.90-96
• /
• 2009

Injection molding process is one of the most important methods to produce plastic parts with high efficiency and low cost. Today, injection molded parts have been increased dramatically the demand for high strength and quality applications. This report investigates that the optimum injection molding condition for minimum of shrinkage. Molding shrinkage is occurred by several reasons such as thermal shrinkage, a hardening process and compressibility. This report concentrate on shrinkage by a hardening process. As Change a holding pressure and holding time, checked deflections of X, Y, Z directions by shrinkage based on same condition. In conclusion, it was found that holding pressure is stronger and holding time is longer, the deflection by shrinkage is smaller because injection molding needs enough time for cooling and high density. The FEM Simulation CAE tool. Moldflow, is used for the analysis of injection molding process.

• 대한한의진단학회지
• /
• 제15권1호
• /
• pp.95-110
• /
• 2011

Objectives: The aim of the present study is to define breath-holding in spontaneous respiration and to observe the difference of respiratory variables, EEG and HRV. Methods: 46 healthy young volunteers (M:F=31:15) were recruited in the study. By measuring and analysing respiration, EEG and HRV in the spontaneous respiration. We segment subjects by 100% of coefficient of variation in the breath-holding. Results & Conclusions: 1. There is a period of breath-holding after expiration and before endeavored inspiration, in the course of respiration. The greater coefficient of variation in the breath-holding, longer respiration period mean, inspiration period mean and breath-holding mean in respiratory variable. 2. There was no significant difference between HRV parameters. 3. The greater coefficient of variation in the breath-holding, the higher ${\beta}$ frequency and ${\gamma}$ frequency in the left prefrontal lobe.

• 한국식품조리과학회지
• /
• 제4권2호
• /
• pp.71-79
• /
• 1988

This study is written to look into microbiological quality by passage of time and holding methods after making foods, by means of evaluating time, temperature and microbiological quality during various phases in product flow of cold soybean noodles serviced by an industry feeding operation for 500 persons a day, measuring pH & Aw and analyzing factors affecting microbiological growth conditions. The results were as follows: 1. According to phases in product flow of cold soybean noodles, it showed 15.6 hours of mean of needed time, $24.2^{\circ}C$ of room temperature, 5.1~7.6 of pH value & 0.95~0.98 of Aw except dry noodles. These conditions were good for multipling of microbe, and the phases with potential sanitary danger were ingredient, pre-preparation, holding before assembly and service and assembly & service. 2. As for holding methods and passage of time, holding at cold table was more effective than holding at room temperature as time past. 3. As for equipments using for making food, dipper, basket, kitchen board & kitchen towel showed high microbiological value in total aerobic plate counts and kitchen towel and stainless-steel were showed high microbioloical value in coliform counts. 4. E. coli, food poisoning bacteria was detected from barrel filled with soybean soup and also soybean itself.