• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.1
• /
• pp.46-54
• /
• 2005

Purpose: This study was performed in order to compare the osseointegration of 4 different surfaced implants in the dog's tibia which has thick dense cortical bone and loose marrow space. Materials & methods: Four mongrel dogs and four different surface types of implants, smooth surfaced AVANA implants, RBM surfaced AVANA implants, HA-coated Steri-Oss implants and SLA Bicon implants, were used in this study. The animals were divided into 4 groups on the basis of implant surface characteristics: Control group, RBM group, HA group, and SLA group. Three implants of each group were installed into the metaphysis of tibia of adult dogs. The animals were sacrificed at 8 weeks after implantation. The undecalcified specimens were prepared for histological examination and histomorphometric analysis of implant-bone contact ratios. Results: Radiographically and histologically good osseointegration of implant was observed in the dense cortical bone, but poor osseointegration was observed in the marrow space. Histologically more bone apposition to implant surface was found in rough surfaced groups than the smooth surfaced, Control group. In histomorphometric findings of cortical bone the average bone-implant contact ratios of HA group (95.4%, p<0.01), RBM group (87.1%, p<0.05), and SLA group (86.0%, p<0.05) were significantly higher than that of Control group (75.9%). In marrow space the average bone-implant contact ratios of HA group (76.1%, p<0.01) and SLA group (45.4%, p<0.05) were significantly higher than that of Control group (29.6%). The ratio of RBM group was higher than that of Control group but there was no significantly difference between RBM group and Control group. Conclusion: These results suggest that the rough surfaced implants can obtain the better osseointegration than the smooth surfaced implant in the cortical and marrow space and that HA-coated implants can obtain the best osseointegration in the marrow space among them.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.26.1-26.6
• /
• 2016

Background: Xenologous or synthetic graft materials are commonly used as an alternative for autografts for guided bone regeneration. The purpose of this study was to evaluate effectiveness of carbonate apatite on the critical-size bone defect of rat's calvarium. Methods: Thirty-six critical-size defects were created on 18 adult male Sprague-Dawley rat calvaria under general anesthesia. Calvarial bones were grinded with 8 mm in daimeter bilaterally and then filled with (1) no grafts (control, n = 10 defects), (2) bovine bone mineral (Bio-$Oss^{(R)}$, Geistlich Pharma Ag. Swiss, n = 11 defects), and (3) hydroxyapatite ($Bongros^{(R)}$, Bio@ Inc., Seongnam, Korea, n = 15 defects). At 4 and 8 weeks after surgery, the rats were sacrificed and all samples were processed for histological and histomorphometric analysis. Results: At 4 weeks after surgery, group 3 ($42.90{\pm}9.33%$) showed a significant difference (p < 0.05) compared to the control ($30.50{\pm}6.05%$) and group 2 ($28.53{\pm}8.62%$). At 8 weeks after surgery, group 1 ($50.21{\pm}6.23%$), group 2 ($54.12{\pm}10.54%$), and group 3 ($50.92{\pm}6.05%$) showed no significant difference in the new bone formation. Conclusions: $Bongros^{(R)}$-HA was thought to be the available material for regenerating the new bone formation.

• Archives of Plastic Surgery
• /
• v.32 no.6
• /
• pp.744-752
• /
• 2005

Many craniofacial and neurosurgical procedures rely on cranial bone as a bone graft. In the majority of instances, the bone heals and gives good results. But we found that if either the dura or the pericranium were missing adjacent to the cranial bone, bone absorption would be increased. We studied a single animal model, investigating the contribution of the dura and the pericranium in the process of cranial bone absorption. The animals were divided into four groups of each five animals depending on the differential blockade of the dura and/or the pericranium by silastic sheet. Bilateral $100-mm^2$, parietal bone flaps were harvested from mature rabbits. Animals were humanely killed after 12 weeks, and histomorphometric analysis was performed. The volume maintenance is as follows; Group I; 89.0%, Group II; 80.0%, Group III; 63.3%, Group IV; 52.4%. The weight maintenance; Group I; 87.1%, Group II; 79.4%, Group III; 61.6%, Group IV; 51.1%. The histological contribution of living bone; Group I; 92.9%, Group II; 85.6%, Group III; 71.1%, Group IV; 56.2%. Significantly increased bone absorption occurred in Group II, III, IV compared with Group I. Conclusions are: 1. Cranial bone absorption is effected by both the dura and the pericranium. 2. The dura is more important than the pericranium in preventing cranial bone absorption. 3. The dura to be the source of central cranial bone and the pericranium to be the source of peripheral cranial bone.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.21 no.2
• /
• pp.175-179
• /
• 2010

Silk fibroin membrane was prepared and examined to know the feasibility of SF membrane as guided bone regeneration. The morphology of silk membrane was flat and smooth surface. The conformation of silk fibroin was $\beta$-sheet structure. When the silk membrane was applied on the rat calvarial defect model, it showed significantly higher new bone formation than uncovered control in histomorphometric analysis. The silk membrane was covered by thin fibrotic tissue and there was not observed any inflammatory cells infiltration. In conclusion, silk fibroin membrane could be useful materials for guided bone regeneration.

• Journal of Periodontal and Implant Science
• /
• v.35 no.2
• /
• pp.263-269
• /
• 2005

Bone morphogenetic protein(BMP) and platelet-derived growth factor(PDGF) have been demonstrated tostimulate bone formation when applied locally in vivo. To explore whether or not the combined use of BMP and PDGF could have promotive effect and synergic interaction on bone formation in vivo, bone marrow mesenchymal stem cells were treated with BMP-2, PDGF-BB, or BMP-2 plus PDGF-BB, and then these cells were injected into the subcutaneous space on the dorsum of nude mice. The bone formation was evaluated after 12 weeks. Histomorphometric analysis demonstrated that the subcutaneous nodules formed in nude mice contained 25.3% newly formed bone in the BMP-2 treated cells, 14.4% newly formed bone in the PDGF-BB treated cells, and 8.9% newly formed bone in the RMP-2 plus PDGF-BB treated cells. The results showed that the combination of BMP-2 and PDGF-BB had neither a promotive effect nor synergic interact on bone formation in vivo.

• Archives of Plastic Surgery
• /
• v.34 no.4
• /
• pp.413-419
• /
• 2007

Purpose: In this study, porous type I collagen scaffolds were cross-linked using dehydrothermal(DHT) treatment and/or 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide(EDC), in the presence and absence of chondroitin-6-sulfate(CS) and cultured autologous chondrocytes(Chondro) for cartilage regeneration. Methods: Cartilage defects were created in the proximal part of the ear of New Zealand rabbits. Four prepared types of scaffolds(n=4) were inserted. The groups included Chondro-Collagen-DHT(Group 1), Chondro- Collagen-DHT-EDC(Group 2), Chondro-CS-Collagen- DHT(Group 3), and Chondro-CS-Collagen-DHT-EDC (Group 4). Histomorphometric analysis and cartilage-specific gene expression of the reconstructed tissues were evaluated 4, 8, and 12 weeks after implantation. Results: EDC cross-linked groups 2 and 4 regenerated more cartilage than other groups. However, calcification was observed in the 4th week after implantation. CS did not increase chondrogenesis in all groups. Cartilage-specific type II collagen mRNA expression increased in the course of time in all groups.Conclusion: EDC cross-linking methods maintain the scaffold and promote extracellular matrix production of chondrocytes.

• Journal of Korean Dental Science
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2021

Purpose: The alveolar ridge preservation (ARP) is widely conducted for implant placement. However, experimental results using deproteinized porcine bone mineral (DPBM) have been scarce. This retrospective study evaluated factors affecting the primary stability of implants in an area where ARP was performed using DPBM. Materials and Methods: Thirty-eight patients were divided into two groups based on the primary stability, with torque value of 30 Ncm as borderline. To determine the factors that affect the primary stability of implants, we collected data from patients' medical records including age, sex, reentry time, socket location, remaining bone wall at the time of extraction, and type of collagen membrane, as well as from radiographs and histomorphometric analysis. Result: The results showed statistically significant difference for the remaining extraction socket wall (P=0.014), residual graft (P=0.029), and fibrovascular tissue (P=0.02) between the two groups. There was an insignificant tendency toward the time of reentry surgery (P=0.052) and location (P=0.077). All implants placed in sites using DPBM functioned well up to 3 years. Conclusion: Within the limitations of the present study, extraction socket wall, residual graft, and fibrovascular tissue can affect the primary stability at the time of implant placement on grafted sites using DPBM and collagen membranes. In addition, reentry time and locations can be considered. In future studies, comparative experiments in quantified models will be required to supporting the findings.

• Journal of Korean Dental Science
• /
• v.16 no.2
• /
• pp.182-191
• /
• 2023

Purpose: This study investigated the orthodontic tooth movement after weekly parathyroid hormone (PTH) injection in mongrel dogs and analyzes bone formation activity on the tension and pressure sides of the tooth movement in mongrel dogs. Materials and Methods: Three mongrel dogs were used in this study. The first premolar was extracted and orthodontic force using 150 g of closed coil springs between the canine and second premolar was applied. The low-dose PTH group (PTH_1) and high-dose PTH group (PTH_2) received weekly injections of 1.61 ㎍/kg and 3.23 ㎍/kg of PTH, respectively. The control group received weekly injections of 1 ml of saline. Clinical, histomorphometric analysis were carried out. Result: The orthodontic tooth movement was greatest in the PTH_2 group and the lowest in the control group. Fluorescence staining images showed higher bone remodeling on the tension side of the tooth movement in the PTH_1 and PTH_2 groups. PTH_2 group showed a thicker labeling band than the PTH_1 group. PTH_2 group showed the highest mineral apposition rate and bone formation rate, followed by the PTH_1 group and the control group. Conclusion: Weekly intermittent PTH injection, especially in the short-term and at higher doses with orthodontic force, successfully increased orthodontic tooth movement and bone remodeling in mongrel dogs.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.5
• /
• pp.417-427
• /
• 2008

The aim of this study is to investigate the effect of anodizing surface to osseointegration of implant by using of resonance frequency analysis (RFA), quantitative and qualitative assessment of an anodically modified implant type with regard to osseous healing qualities. A total of 96 screw-shaped implants were prepared for this study. 72 implants were prepared by electrochemical oxidation with different ways. 24 (group 1 SP) were prepared at galvanostatic mode in 0.25M sulfuric acid and phosphoric acid. 24 (group 2GC) were prepared at galvanostatic mode in calcium glycerophosphate and calcium acetate and 24 (group 3 CMP (Calcium Metaphosphate) Coating were prepared at galvanostatic mode in 0.25M sulfuric acid and phosphoric acid followed by CMP coating. Rest of 24 (control group were as a control group of RBM surface. Bone tissue responses were evaluated by resonance frequency analysis (RFA) that were undertaken at 2, 4 and 6 weeks after implant placement in the mandible of mini-pig. Group 1 SP (anodized with sulfuric acid and phosphoric acid implants) demonstrated slightly stronger bone responses than control Group RBM. Group 2 GC (anodized surface with calcium glycerophosphate and calcium acetate implants) demonstrated no difference which were compared with control group. Group 3 GMP (anodized and CMP coated implants) demonstrated slightly stronger and faster bone responses than any other implants. But, all observation result of RF A showed no significant differences between experimental groups with various surface type. Histomorphometric evaluation demonstrated significantly higher bone-to-implant contact for group 2 GC. Significantly more bone formation was found inside threaded area for group 2 GC. It was concluded that group 2 GC (anodized surface with calcium glycerophosphate and calcium acetate implants) showed more effects on the bone tissue responses than RBM surface in initial period of implantation. In addition, CMP showed a tendency to promote bone tissue responses.

• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.7-13
• /
• 2015

Purpose: We have developed a new method of segmenting the areas of absorbable implants and bone using region-based segmentation of micro-computed tomography (micro-CT) images, which allowed us to quantify volumetric bone-implant contact (VBIC) and volumetric absorption (VA). Materials and Methods: The simple threshold technique generally used in micro-CT analysis cannot be used to segment the areas of absorbable implants and bone. Instead, a region-based segmentation method, a region-labeling method, and subsequent morphological operations were successively applied to micro-CT images. The three-dimensional VBIC and VA of the absorbable implant were then calculated over the entire volume of the implant. Two-dimensional (2D) bone-implant contact (BIC) and bone area (BA) were also measured based on the conventional histomorphometric method. Results: VA and VBIC increased significantly with as the healing period increased (p<0.05). VBIC values were significantly correlated with VA values (p<0.05) and with 2D BIC values (p<0.05). Conclusion: It is possible to quantify VBIC and VA for absorbable implants using micro-CT analysis using a region-based segmentation method.