• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.11-22
• /
• 1985

Femur neck fracture is well known as one of the major death cause after trauma in elderly patients, and unsolved fracture due to its frequent association with complications such as avascular necrosis and nonunion. Through meticulous evaluation of the patient, hip and surgeon's experiences, reduction of mortality and morbidity as well as rapid recovery of the patient to the preinjury social and ambulatory status without local complications and revision after treatment is urgently needed. Many factors about this fracture In itself were noted, but we have analyzed 18 femur neck fractures of the patients older than 50 years preliminarily according to age, fracture pattern, osteoporosis, etiology and method of treatment with its delay in association with major complications especially avascular necrosis and nonunion. The results are as follows; 1. Of these 18 fractures, 11 were in females, 8 were caused by minor trauma such as slip-down accident and 4 were associated with definite osteoporosis according to the Sing's classification. 2. Fracture pattern of these 18 are undisplaced in 4, displaced subcapital in 11, displaced transcervical in 3. 11 fractures in the patients older than 60 year are composed of 3 undisplaced or impacted fractures and 8 displaced subcapital fractures. 3. These 18 fractures were treated by closed reduction and Internal fixation with multiple pins in 13, and hemiarthroplasty in 4, but one was not treated to die after discharge from hospital. 4. 4 undisplaced or impacted fractures and 3 displaced transcervical fractures were not associated with any complications such as avascular necrosis or nonunion. But 4 of 6 displaced subcapital fractures were complicated by avascular necrosis, 3 of which were reduced in the varus position within 1 week, and the other was reduced in the good position on 1 week after trauma. There was no complication in 2 displaced subcapital fractures reduced in valgus position within 3 days after trauma. According to the above results, the prognosis of the femur neck fracture is dependent upon the fracture pattern and delay in its treatment. So it is inevitable to reduce the fracture in anatomical or valgus position as early as possible. But the arthroplasty may be needed in displaced subcapital fractures delayed for several days, with its reluction in extreme varus position or impossible and with pre-existing disease in the same hip Joint (total hip replacement).

• Physical Therapy Korea
• /
• v.13 no.2
• /
• pp.16-25
• /
• 2006

The aim of this study was to investigate the kinematics of young adults during descent ramp climbing at different inclinations. Twenty-three subjects descended four steps at four different inclinations (level, $-8^{\circ}$, $-16^{\circ}$, $-24^{\circ}$). The 3-D kinematics were measured by a camera-based Falcon System. The data were analyzed using one-way ANOVA and the Student-Newman-Keuls test. The kinematics of descent ramp walking could be clearly distinguished from the kinematics of level walking. On a sagittal plane, the ankle joint was more plantar flexed at initial contact with $-16^{\circ}/-24^{\circ}$ inclination, was decreased in the toe off position with all inclinations (p<.001),and was decreased at maximum plantar flexion during the swing phase (p<.001). The knee joint was more flexed at initial contact with the $-24^{\circ}$ inclination (p<.001), was more flexed in the toe off position with all inclinations (p<.001), and was more flexed at minimum flexion during stance phase and at maximum flexion during swing phase with $-16^{\circ}$, $-24^{\circ}$ inclination (p<.001). The hip joint was more flexed in the toe off position with $-16^{\circ}$, $-24^{\circ}$ inclination and was deceased at maximum extension during stance phase with $-16^{\circ}$, $-24^{\circ}$ inclination (p<.05). In the frontal plane, the ankle joint was more everted at maximum eversion during stance phase with $-16^{\circ}/-24^{\circ}$ inclination (p<.01) and was decreased at maximum inversion during swing phase with $-16^{\circ}$, $-24^{\circ}$ inclination (p<.01). The knee joint was more increased at maximum varus during stance phase with $-16^{\circ}/-24^{\circ}$ inclination (p<.001). The hip joint was deceased at maximum adduction during stance phase with $-24^{\circ}$ inclination (p<.05). In a horizontal plane, only the knee joint was increased at maximum internal rotation during stance phase with $-24^{\circ}$ inclination (p<.05). In descent ramp walking, the different gait patterns occurred at an inclination of over $16^{\circ}$ on the descending ramp in the sagittal and frontal planes. These results suggest that there is a certain inclination angle or angular range where subjects do switch between level walking and descent ramp walking gait patterns.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.265-276
• /
• 2003

The objective of this research is to provide basic data for improving athletic performances, suggesting methods that can be utilized at games and coaching movements in the snatch, by analyzing the level of contribution of muscles to the movements of the snatch lift through three-dimensional imaging and EMG analysis between skilled and unskilled lifters. To this end, three high school students (the skilled group), three middle school student (the unskilled group) were selected; two digital video cameras and electromyography were used. The muscles measured by an EMG include gastrocnemius muscle, biceps femoris muscle, erector spinae, latissimus dorsi muscle, trapezius muscle, and brachioradialis. Based on the Ariel Performance Analysis System (APAS) program, the results of the analysis are summarized as follows. 1. In performing snatch pulls, the skilled lifters were found to simultaneously move the weight centers of the body and the barbell close to vertical, close to the shoulders in the pulling portion; in snatching and grabbing the barbell from a sited position, it was observed that the shorter the time for adjusting to change in the height of the barbell by using rotational inertia, the better it is to perform the movements. 2. The skilled lifters were observed to perform stable and efficient movements in grabbing the bar in a sited position, by moving the barbell and weight center of the body close to vertical and moving the shoulder joint under the bar fast. 3. The results of the EMG analysis of the entire movements from the snatching portion to the portion of grabbing the bar in a sited position show that when the skilled lifters lifted the barbell vertically during the pulling portion, their shoulder joints were extended to put more weight on biceps femoris muscle and brachioradialis; and in snatching and grabbing the bar from a sited position, it was found desirable to increase the myoelectrical activity of erector spinae in order to achieve a balance in the movements of the hip joint between font and rear, as the weight centers of the body and the barbell move higher. On the other hand, the unskilled lifters were found that in response to change in posture, they increase their muscular strength inefficiently in performing the movements throughout the entire lifting process.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.397-402
• /
• 2018

The study best image for diagnosis of fracture, dislocation and unilateral degenerative arthritis of the Sacroiliac joint, this study was performed to obtain the best image of the joint space of the hip joint by giving angle change to the pelvis phantom and the x-ray tube. I received evaluation. The results of the Receiver Operating Characteristic that in the case of simple photographs for the detection of joint arthritis and degenerative arthritis in the prone position, the photograph taken in the prone position raises the buttocks of the opposite side of the test by $25^{\circ}{\sim}30^{\circ}$ and the x-ray tube is perpendicular to the sagittal plane passing 2.5 cm inward from the thorny vertebra In the lying position, lift the Sacroiliac joint of the test side by $25^{\circ}{\sim}30^{\circ}$, and take a $5^{\circ}$ angle of the x-ray tube angle toward the foot toward the center of the upper bruch spine from it will be helpful to diagnose arthritis. the center of the upper bruch spine to the side of the ankle joints in the transverse direction And posterior direction, it will be helpful to diagnose arthritis.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.181-189
• /
• 2005

To know the proper impact posture and changes for the various clubs, changes of impact variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed video cameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. Major findings of this study were as follows. 1. Lateral position of the head remained more right side of the target up to 3.5cm compared to the setup as the length of the club increased. 2. Left shoulder raised up to 5cm and right shoulder lowered up to 2.5cm compared to setup. The shoulder line opened slightly (maximum 11 degrees) to the target line. 3. Forward lean angle of the trunk decreased up to 4 degrees (more erected) compared to setup. 4. Side lean angle of the trunk increased compared to setup and increased up to 16 degrees as the club length increased. 5. The pelvis moved to the target line direction horizontally and opened up to 31 degrees. Right hip moves laterally to the grip position at the setup. 6. Flexion of the left leg maintained almost constantly but the right leg flexed up to 11 degrees compared to setup. 7. Left arm is straightened but the right arm flexed about 20degrees compared to straight. 8. Center of the shoulders were in front of the knees and toes of the feet. 9. Hands moved to the left (8.7cm), forward (5.7cm) and upward (11.6cm) compared to the setup. This is because of the rotation of pelvis and shoulders. 10. Shaft angle to the ground was smaller than the lie angle of the clubs but it increased close to the lie of the clubs at impact.

• The Journal of Korean Physical Therapy
• /
• v.27 no.5
• /
• pp.315-319
• /
• 2015

Purpose: The purpose of this study was to investigate the effect of leg-crossing positions on muscle activities of rectus femoris, tensor fascia latae, and hamstring in healthy 20's adults. Methods: Twenty healthy subjects were asked to perform three leg-crossing positions, leg crossing (LC), tailor crossing (TC), and ankle crossing (AC). Surface electromyography (EMG) was used to evaluate the activities of rectus femoris, tensor fascia latae, and hamstring during upright sit posture (UP) and three leg-crossing positions and UP was compared to three leg-crossing positions. Repeated one way ANOVA was used for data analysis. The alpha level was set at 0.05. Results: The results showed significant difference in the muscle activities of rectus femoris, tensor fascia latae, and hamstring among leg-crossing positions. The muscle activity of the rectus femoris was significantly lower in LC and TC positions than UP. The muscle activity of tensor fascia latae was significantly higher in LC position than UP and other leg-crossing positions. The muscle activity of hamstring was significantly higher in LC and TC positions and significantly lower in AC position than in UP. Conclusion: Our study suggests that the activity of hip muscles was affected by pelvic and knee alignment in various leg-crossing positions.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.9
• /
• pp.1147-1153
• /
• 1999

The attitude control of a double inverted pendulum with a periodical disturbance at link top is dealt in this paper. The proposed system is consisted of the double inverted pendulum and a disturbing link; a triple inverted pendulum with two motors. The lower link is hinged on the plate to free for rotation in the vertical plane. The upper link is connected to the lower link through a DC motor. The DC motor is used to control the posture of the pendulum by adjusting the position of the upper link. The periodical disturbance can be generated by the additional like attached at the end of link 2 through another DC motor, which is the modeling of a posture for a biped supporting with one leg. The motor for the joint simulates the knee joint(or hip joint) and the disturbance for the legs moving in air. The algorithm for controlling the proposed inverted pendulum which is regarded as a virtual double inverted pendulum with a periodic disturbance, is consisted of a state feedback control and a fuzzy logic controller connected in parallel. The fuzzy controller keeps the center of gravity of the biped within the specified range through the nonlinear feedback compensator. The state feedback control takes over the role to maintain a desired posture regardless the disturbance at the link top. Simulations with a mathematical model and experiments are conducted to show the validity of the proposed controller.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.57-65
• /
• 2011

This research was conducted to biomechanically analyze Tippelt motion in parallel bars, and establish technical understanding. To achieve that goal, the performances of the Tippelt acts carried out by five world top-class national gymnasts in the parallel bars 3-dimensional cinematographic analysis and EMG analysis were conducted and following conclusion were obtained. The Tippelt motions of excellent national gymnasts perform tap motion through the down swing of a large circular movements, and perform kick-out motion rapidly extending shoulder joint angle and hip joint angle with the trunk in a position close to perpendicular position at the vertical downwardness of the grasping the bars. At this time, if handstand starting the movement is too delayed or rapidly down swung, it was shown that from the initial falling, unnecessary muscular power was wasted in trapezius, anterior deltoid, erector spinae, latissimus dorsi, upper rectus abdominis, lower rectus abdominis. The muscular parts in tap motion generating muscle action potential were pectoralis major, rectus femoris, upper rectus abdominis, lower rectus abdominis, and those in kick-out motion were upper rectus abdominis, lower rectus abdominis, trapezius and anterior deltoid.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.61-70
• /
• 2005

The purpose of study was to investigate the kinematic variables of Kenmotsu motion in Parallel bars. To this study, by 3 dimensional kinematical analysis of 4 male national gymnasts participants in the 28th Athens Olympic Game in 2004, kinematic data collected using video camera. Coordinate data were smoothed by using a fourth-order Butterworth low pass digital filter with cutoff frequency of 6Hz. The conclusions were as follows. 1. In P2, because the constrained swing movement made the movement of a rising back difficult7, the movements of Reg. were performed at low position after Air phase. 2. In E5 event, for the shake of a stable handstand and applied techniques like a Belle(E-value), a Belle Piked(super E-value), a vertical velocity in E2, a horizontal velocity in E3 and a vertical velocity in E4 were necessary for high velocities. 3. In E4 event, it was appeared that for a flexible body's movement of a vertical up-flight, the large angle of the shoulder joint and the flexion & extension of the hip joint were necessary in Air phase and a long flight time and vertical displacement made Reg. movements stable at the high position.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.4
• /
• pp.33-41
• /
• 2019

Purpose : The muscle strength of iliopsoas (IL) was measured commonly in sitting position with hip and knee flexed 90°. However, there is no study to determine the muscle strength of IL in various test positions. Therefore, the purpose of this study was to compare the muscle strength of IL and muscle activity of rectus femoris (RF) according to test position and knee flexion angle. Methods : Twenty healthy subjects were participated for this study. The muscle strength of IL and muscle activity of RF were measured by hand-held dynamometer and surface electromyography during maximum voluntary isometric contraction (MVIC) of IL, respectively. The muscle strength of IL and muscle activity of RF was measured in 4 conditions as follows; 1) knee flexion angles 90 ° in supine, 2) 130 ° in supine position, 3) 90 ° in sitting, 4) 130 ° in sitting. Each condition were performed randomly by three repetitions. Results : The muscle strength of the IL was the main effect on the test position and knee flexion angle (p<.05), and the muscle activity of RF was the main effect only on the knee flexion angle (p<.05). There was also no interaction between the factors (p>.05). In supine position, the muscle strength of IL in knee flexion 130 ° was significantly less than that in knee flexion 90 ° (p<.0125). In knee flexion 90 °, the muscle strength of IL in supine position was significantly greater than that in sitting position (p<.0125). The muscle activity of RF in knee flexion 130 ° was significantly less than that in knee flexion 90 ° in supine and sitting positions (p<.0125). Conclusion : When the muscle strength of IL was measured in clinic and sports fields, the supine position with knee flexion 130 ° was recommended to prevent the muscle activation of RF and to maintain the trunk stability.