• 디지털콘텐츠학회 논문지
• /
• 제3권1호
• /
• pp.1-9
• /
• 2002

본 논문은 고속토로에 설치되어 있는 CCTV카메라 영상을 이용하여 자동으로 교통정보를 수집할 수 있도록 영상검지기 기능을 부가하는 방법을 제안한다. 현행 고속도로 영상검지기에서 수집되는 교통정보는 차로별로 교통정보를 검지하여 수집할 수 있으나 이 방법은 대형차량이 지나가는 경우 Occlusion에 의한 오 검지 빈도가 빈번히 발생하고 있다. 또한 이 Occlusion의 영향으로 고속도로 8차로 중 최고 6차로까지만 검지가 가능하고 그 이상의 차로를 검지한다는 것은 불가능하다. 따라서 본 논문에서는 교통정보를 차로볕 검지를 하지 않고 전체 차로를 포함하는 검지영역을 설정한 다음 다음 이 검지영역 안에서 차량이 통과할 때까지 개별차량을 추적하여 교통정보를 수집함으로써 고속도로 8차로까지 검지가 가능한 알고리즘을 제안한다. 본 연구는 실제 경부고속도로 상행선 기흥IC에 실험용 CCTV카메라를 설치하여 획득한 영상과, 청계터널 앞 도로에서 녹화한 영상을 대상으로 실험을 하였으며, 영상처리는 frame-grabber보드에서 초당 30프레임으로 캡쳐를 한 다음 $640{\times}480$ 해상도와 빠른 데이터 처리를 위해서 256 gray-level로 영상처리를 하였다.

• 한국강구조학회 논문집
• /
• 제9권1호통권30호
• /
• pp.51-63
• /
• 1997

Highly curved steel-box bridges are usually constructed as ramp structures for the highway interchange and metropolitan elevated highway junction, but a number of these bridges are deteriorated and damaged to a significant degree due to heavy traffic. The main objective of the study is to develop a practical reliability-based assessment of safety and residual load carrying-capacity of existing curved steel-box ramp bridges. In the paper, for the realistic assessment of safety and residual load carrying-capacity of deteriorated and/or damaged curved steel-box bridges, an interactive non-linear limit state model is formulated based on the von Mises's combined stress yield criterion. It is demonstrated that the proposed model is effective for the assessment of reliability-based safety and the evaluation of residual load carrying-capacity of curved steel-box bridges. In addition, this study comparatively shows the applicability of various reliability analysis methods, and suggests a practical and effective one to be used in practice.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.143-154
• /
• 2013

PURPOSES: Design of approach roads of rest areas in highway has many drawbacks such as geometric design elements. There has been traffic accidents occured in these approach roads of rest areas. Thus, design criteria is required in order to protect accidents from being occurred. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. METHODS: In this study, analytic on accidents was carried out in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. Collisions with physical channelization and safety facilities occurred due to speeding, rapid entry, and etc at the entrance nose section. At the entrance connector roads, accidents caused by speeding, negligence, over-operation of handle of drivers were main reason of accidents. Discriminant analysis were conducted about geometric elements to distinguish influencing factors for traffic accidents. the lengths and access angles of the entrance connector roads were regarded as to have the high relation with traffic accidents. RESULTS: After classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$ and the connector length model was suggested. CONCLUSIONS: Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

• 한국조경학회:학술대회논문집
• /
• 한국조경학회 2007년도 Journal of Landscape Architecture in Asia Vol.3
• /
• pp.208-213
• /
• 2007

I have analyzed four methods for revitalizing the Ibi district, a local community in Minami Awaji City in Hyogo Prefecture, using Awaji tile, a traditional product. The first analysis is of a workshop to think about the revitalization of the community using Awaji tile. The second is an evaluation of using Awaji tile in the construction of green spaces and the renewal of existing buildings. The third analysis is on the distribution of terracotta for plants to all the residents of this district and the construction of art objects using Awaji tile at the seashore and by the entrance area of a highway interchange. The fourth analysis is of the results of information sharing by a newsletter and a website. Finally, I gave questionnaires to workshop participants. As a result, visible, completed products of these efforts were evaluated positively, but more effort is required related to the newsletter and website. Overall, I could verify the compounded possibilities for revitalization of the community using Awaji tile as promoting regional industry, activating the community, and improving the landscape.

• 한국환경과학회지
• /
• 제16권12호
• /
• pp.1393-1399
• /
• 2007

This research helps you understand the road traffic noise levels by using a noise map. We have observed the change of the road traffic noise levels around $07:00{\sim}08:30\;and\;22:00{\sim}23:00$ using the noise map in the city. The road traffic noise level is very high both at noon and at night around a beltway and an interchange that is linked with a highway. It seems that the main route of so many vehicles, which are at neighboring cities such as N city and D and H districts and which avoid traffic jams in the city, is the beltway and interchange. The road traffic noise level of a nearby express bus terminal, railroad station, and airport is more than 75 dB at noon and 65 dB at night. The road traffic noise level of G city at night is observed to be more than 55 dB. The noise levels of a residence area and a university are higher than a road with high noise levels when the commuters drive to work. The end of the day exceeds 11 o'clock because of a culture level of development that arouses spare time, eating out, adults' drinking culture, nightlife of the youth, etc. Therefore, the road traffic noise level is high during late night hours, and it exceeds regulatory guidelines(55 dB(A)). It also damages the residence area that is located near the road.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.85-92
• /
• 2012

PURPOSES : Since expressways in South Korea are toll roads, many trumpet type interchanges exist, resulting in the installation of loop ramps very frequently. While the travel speed of the main lane is designed to be 100-110 km/h, the structure of a loop ramp is different and is designed for a minimum speed of 40 km/h. In fact, most of the actual travel speeds measured on the ramp exceed the designated speed, which has been a major problem in traffic safety. In this research, a type of pavement marking speed-reduction treatment called the "Peripheral Transverse Line" is installed on expressway loop ramps in order to study the change of driving speeds after the installation. METHODS : To verify statistically the change, this speed-reduction treatment has been installed on the Chungju interchange and the Yeoju junction. The driving speeds before the installation were compared with driving speeds both one month and five monthsafter the installation. RESULTS : As a result, the reductions of the average driving speeds after the treatment were statistically significant. More specifically, the average driving speeds of the Chungju interchange were reduced by 7.1-7.7 % for its tangent road section, and the speeds decreased by 8.5-9.5 % for its curve section. Similarly, in the Yeoju junction, an average speed reduction of 2.9-4.8 % for its tangent section was measured, along with 3.9% long-term speed reduction for its curve section. CONCLUSIONS : Since the pavement marking speed-reduction treatment has been partially proven to be effective from this research, we expect to expand this treatment and re-confirm the effect from a long-term perspective in the future.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.79-86
• /
• 2010

이 연구는 다이아몬드 입체교차점에서 설치되는 회전교차로를 다루고 있다. 연구의 목적은 신호교차로에 대하여 상대적인 회전교차로의 효과를 분석하는데 있다. 이를 위해 회전교차로와 신호교차로를 교통량별로 시나리오를 작성하고 VISSIM을 이용하여 분석하였다. 분석된 주요 결과는 다음과 같다. 첫째, 단구 및 쌍구 회전교차로는 회전교통량 비율이 10:5:5인 경우 총 진입교통량이 2,400pcph 이상, 10:2:8인 경우 2,800pcph 이상, 그리고 10:8:2인 경우 4,400pcph 이상에서 급격한 지체변화를 갖는 것으로 분석된다. 둘째, 회전교통량 비율이 10:5:5인 경우에는 총 진입교통량이 4,000pcph 이하, 그리고 10:2:8인 경우엔 4,400pcph 이하에서 회전교차로가 신호교차로 보다 효과적인 것으로 평가된다. 또한 회전교통량 비율이 10:8:2인 경우 쌍구 회전교차로는 5,600pcph 이하에서 신호교차로에 비해 효과적인 것으로 평가된다. 마지막으로, 쌍구 회전교차로는 총 진입교통량이 4,400pcph 이하의 경우엔 단구와 비슷하지만, 4,400pcph 이상의 경우엔 단구 회전교차로보다 효율적인 것으로 판단된다.

• 대한교통학회지
• /
• 제24권4호
• /
• pp.19-29
• /
• 2006

향후 민자고속도로의 건설이 확대됨에 따라 서로 다른 교통관리체계 및 요금정산체계를 가진 여러 관리회사들이 하나의 도로망을 형성하게 될 경우, 장거리를 주행하는 이용자는 각기 다른 회사가 관리하는 노선으로 구성된 경로를 이용하게 될 것이며, 이로 인해 주행 중에 필요한 교통정보의 단절과 잦은 통행료 정산으로 이어지는 정차에 의해 불편함이 가중될 것이다. 따라서 각 기관이 상호 연계 가능한 관리범위를 선정하여 운영해야만 이러한 불편을 최소화할 수 있다. 본 연구에서는 각 관리회사가 이용자 서비스제고 측면에서 연계해야 하는 최소한의 범위를 선정하고 이를 위한 운영방안을 제시하고자 한다. 특히 이용자를 위한 연계범위로 크게 교통정보연계체계 및 영업연계체계로 나누어서 검토하였다. 세부사항으로 교통정보체계는 정보의 내용 및 제공방법에 있어서 각 기관이 고려해야 할 주요 사항을 위주로, 영업체계는 각 정산방식별로 구분하여 상호 연계방안을 제시하였다. 본 연구 결과는 향후 다수의 고속도로관리회사가 설립될 때, 이용자의 편의를 도모하기 위한 상호 연계방향 수립에 유용하게 활용될 것이다.

• 한국도로학회논문집
• /
• 제19권3호
• /
• pp.45-55
• /
• 2017

PURPOSES: The objective of this study is to estimate required minimum spacing between Freeway IC for high-speed roadways. METHODS : Since high-speed roadways with over 140 km/h design speed do not exist in Korea, VISSIM Simulation Program was used for analysis. Acceleration noise and conflicts were selected for Evaluation Index. Standard deviation size for acceleration and deceleration was calculated by VISSIM to estimate acceleration noise. Conflicts were produced in areas between Freeway IC with SSAM. RESULTS : As a result, required minimum spacing was 6 km for acceleration noise analysis, while 5 km was deducted for conflict analysis. For Model Evaluation, with SAS, conflicts did not show much difference in 5~6 km area by 90% confidence interval. CONCLUSIONS : For acceleration noise, results showed lacking in its discrimination between index per Minimum Spacing. However, conflicts were valid in difference; required minimum spacing was 5 km by validation result.

• 한국측량학회지
• /
• 제24권5호
• /
• pp.425-431
• /
• 2006

최근 정부는 제4차 국토종합계획을 수정 보완하는 등 국토의 균형발전에 많은 노력을 경주하고 있다. 그러나, 기존 도로의 교통사고발생은 OECD 29개 국가 중 최하위권인 25위로 머물러있는 실정이다. 따라서 본 연구에서는 고속국도 및 국도 등에서 교통사고가 가장 많이 발생하고 있는 입체교차시설인 인터체인지 분기점의 기존 설계기준에 대한 문제점을 분석하여 적합한 설계속도를 제안하고자 한다. 그 결과로 교통사고를 미연에 방지하고 안전하고 쾌적한 도로조건 확보 및 교통용량의 극대화 등 도로기능을 극대화할 수 있는 유출입 접속부에서의 설계속도를 얻고자 한다.