• Journal of environmental and Sanitary engineering
• /
• v.16 no.4
• /
• pp.31-37
• /
• 2001

Deicers have used for melting snow on the road during winter season, but they have largely influenced on environment and public assets and human health. The pollution level of snow and soil contained deicer was analyzed and evaluated the characteristics of deicers. The results were as follows 1. In the result of measurement of pollutants in snow contained deicer, the pH was a little higher than a comparative group and the concentration of $Cl^{-}$ ranged from 0.5% to 0.87%, and the electric conductivity ranged 12.4 to 24.6 mmho/cm. The concentration of Cd, As, and Hg was not detected, but those of Cu, Pb, Cr was higher than a comparative group. 2. In soil of the road spreaded with deicer, the pH is getting alkalized and the concentration of $Cl^{-}$ was high in January and returned the level of a comparative grout) in November by physical and chemical reaction with deicer, but the concentration of heavy metals were not connected with deicers. 3. In comparison of deicing efficiency, the concentration of $Cl^{-}$ was 3.3~5times high in spreading with deicer before snowing than after snowing. The concentration of $Cl^{-}$ in NaCl was higher than $CaCl_2$, but the deicing efficiency of Nacl was better than that of $CaCl_2$. Moreover, the new deicer have no salt, but deicing efficiency of new deicer was less than that of NaCl and $CaCl_2$.

• KSBB Journal
• /
• v.8 no.5
• /
• pp.478-482
• /
• 1993

Perfusion culture was conducted in Celligen perfusion culture system using a self-constructed hybridoma cell and low serum medium. The culture system employed hollow fiber to separate cells from the culture broth. Maximum cell density of $2.1\times10^7$ ce11s/m1, 10 times higher than in batch culture, could be achieved. Concentration of monoclonal antibody (MAb) was 4 times higher and production rate at maximum feed rate was 9 times higher than in batch culture. Glucose concentration was very important for the cell growth and MAb production. When glucose concentration was below 1g/l, i. e. 0.5~0.9g/l, specific MAb production rate decreased but cell concentration still increased. As the glucose concentration goes above 1g/l, specific MAb production rate increased and remained at maximum value at more than 1.5g glucose/l. The maximum value of the specific Mab production rate was similar to that of batch culture.

• Journal of Environmental Impact Assessment
• /
• v.21 no.5
• /
• pp.695-705
• /
• 2012

The purpose of this study is to investigate concentration level and characteristics of malodour substances generated from landfill site in C city. Also, it is tried to predict distribution of concentration level using ISCST3 model around landfill site. From the results, it can be confirmed that twelfth-class malodour substances such as ammonia, methyl mercaptan, hydrogen sulfide, dimethyl sulfate, dimethyl disulfate, toluene, acetaldehyde, styrene, propionaldehyde, butylaldehyde, n-Valeraldehyde, xylene were generated from landfill site. The levels of the malodour substances were lower than that of permeable concentration regulated by odor control law in Korea. However, the concentration of malodour substances including methyl mercaptan, hydrogen sulfide, acetaldehyde, and propionaldehyde exceeded threshold limit value(TLV). It was seemed that these substances caused the problem of offensive odor around circumstance of landfill. The concentration of malodour substances was higher in slant than in upper part of landfill. The concentrations of malodour substances measured at night time were shown higher level than those at night time because atmospheric condition was stable at night time. It showed that the concentration of malodour substances were higher in spring. The results of atmospheric diffusion model predicted that tolerance limit level of hydrogen sulfide and methyl mercaptan was detected within nearly 5km from the boundary of landfill.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.11
• /
• pp.1564-1567
• /
• 2002

Influence of dietary sesame meal on plasma glucose, non-esterified fatty acid (NEFA), triglyceride, total cholesterol, high-density lipoprotein (HDL)-cholesterol and urea concentrations in goats was examined. Goats were fed a control diet (50% timothy hay and 50% concentrates) (CD) or a sesame meal diet (50% timothy hay, 25% concentrates and 25% sesame meal) (SMD) during 12 days. Blood samples were taken after overnight fasting and afternoon every day. Body weight was not changed by feeding either CD or SMD. The concentrations of plasma triglyceride and urea were higher (p<0.05) in goats fed SMD than those fed CD. Plasma NEFA concentration was higher in plasma samples after overnight fasting. Plasma glucose concentration in plasma samples collected afternoon was higher than those after overnight fasting. Plasma total cholesterol concentration was significantly increased by feeding SMD but not by feeding CD, which was due to the remarkable increase of plasma HDL-cholesterol concentration. In conclusion, dietary sesame meal brought about an increase in plasma total cholesterol concentration accompanied with an increment in plasma HDL-cholesterol consentration in goats.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.59-65
• /
• 2008

Electrochemical properties of pulp fiber could be modified by LbL(Layer-by-Layer) multilayering. Salt concentration and pH affect the conformation and ionization degree of polyelectrolyte. In this study, therefore, we intended to evaluate the effect of pH and salt concentration in polyelectrolyte multilayering on the electrochemical properties of pulp fiber. The pH of the stock was varied to 4, 7, and 10. Salt concentration was controlled at 0.001, 0.003, and 0.005 M of NaCl. Higher zeta potential was obtained when pulp fibers were multilayered at the condition of higher pH and higher salt concentration. The final zeta potential of pulp fiber after multilayering was dependent on the adsorption ratio of polyelectrolyte and the initial zeta potential of fibers.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.1
• /
• pp.15-20
• /
• 2004

Through shallow trench isolation (STI) chemical mechanical polishing (CMP) tests, we investigated the dependence of pad surface temperature on the abrasive and additive concentrations in ceria slurry under varying pressure using blanket film wafers. The pad surface temperature after CMP increased with the abrasive concentration and decreased with the additive concentration in slurries for the constant down pressure. A possible mechanism is that the additive adsorbed on the film surfaces during polishing decreases the friction coefficient, hence the pad surface temperature gets lower with increasing the additive concentration. This difference in temperature was more remarkable for the higher concentration of abrasives. In addition, in-situ measurement of spindle motor was carried out during oxide and nitride polishing. The averaged motor current for oxide film was higher than that for nitride film, meaning the higher friction coefficient.

• Journal of Aquaculture
• /
• v.16 no.4
• /
• pp.216-222
• /
• 2003

In a simulated seawater aquaculture system, effects of different operating factors like the superficial air velocity (SAY), hydraulic residence time (HRT), protein concentration and foam overflow height on the removal of total suspended solids (TSS) by a foam fractionator, with 20 cm diameter and 120 cm height, were investigated. This experiment was performed on batch and consecutive modes for different combinations of the tested factors, using synthetic wastewater. In 5 consecutive trials, TSS concentration in culture tank water decreased faster, when the foam fractionator was operated at higher SAV and lower HRT. In batch trials, with increasing SAV, TSS removal rate increased, but decreased with increasing HRT. Higher protein concentration in the bulk solution resulted in higher TSS removal rate. TSS concentration in the collected foam condensates increased but the foam overflow rate decreased with increasing foam overflow height. Foam fractionation was effective for removing TSS in seawater aquaculture systems and its performance largely depended on the operating parameters, especially superficial air velocity.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.122-125
• /
• 2003

We investigated the effect of the abrasive and additive concentrations in Nano ceria slurry on the pad surface temperature under varying pressure through chemical mechanical polishing (CMP) test using blanket wafers. The pad surface temperature after CMP increased with the abrasive concentration and decreased with increase of the additive concentration in slurries for the constant down pressure. A possible mechanism is that the additive adsorbed on the film surface during polishing decreases the friction coefficient, hence the pad surface temperature gets lower with increase of the additive concentration. This difference of temperature was more remarkable for the higher concentration of abrasives. In addition, in-situ measurement of spindle motor was carried out during oxide and nitride polishing. The averaged motor current for oxide film was higher than that for nitride film, which means the higher friction coefficient.

• Animal cells and systems
• /
• v.10 no.3
• /
• pp.125-130
• /
• 2006

We have examined the bioaccumulation patterns and the ecophysiological responses (photosynthetic pigment and total antioxidative capacity) of Monochoria korsakowi exposed to various cadmium concentrations, one of major environmental pollutants. Cadmium ion contents in M. korsakowi increased significantly with higher cadmium concentration, and most of the accumulated cadmium was found in the root parts. Biomass of each part decreased with higher cadmium concentration. As cadmium treatment concentration was increased, chlorophyll a content was decreased, whereas chlorophyll b content was increased. However, the variations of total chlorophyll and carotenoid contents were not evident. Total antioxidative capacity in the leaves of cadmium treated M. korsakowi increased greatly with higher cadmium concentration. We considered these results as indicative of the ability of M. Korsakowi plants to take up cadmium from wetlands.

• KDI Journal of Economic Policy
• /
• v.38 no.1
• /
• pp.53-70
• /
• 2016

This paper examines market concentration and its effect on competition in the Chinese commercial banking market. This study also investigates how changes in competition have affected the financial stability of Chinese commercial banks. To test the competitive conditions, we obtained the H statistic of the Panzar-Rosse model from a revenue function equation. The degree of financial stability is estimated by the Z-score formula. The Chinese banking industry has become an increasingly less concentrated market with an increased number of banks. Along with a decreased market concentration, competition in the Chinese banking industry has improved moderately. However, its market structure is still far from a competitive market. An individual bank's ability to earn higher markup or charge a higher net interest margin contributes to its financial soundness, although a higher degree of market concentration may have negative effect on the financial stability of the entire banking system.