• Composites Research
• /
• v.13 no.6
• /
• pp.1-8
• /
• 2000

The fabrication Process of $Al_2O_{3p}$/AC8A composites by pressureless infiltration technique and the effects of additive Mg content and volume fraction of particulate reinforcement on mechanical and wear properties were investigated. It was found that the bending strength decreased with increasing volume fraction of $Al_2O_{3p}$ particles. Whereas hardness increased with volume fraction of $Al_2O_{3p}$ particles. The decrement of strength in case of high volume fraction of $Al_2O_{3p}$ particles was attributed to high porosity level. In terms of additive Mg content, $Al_2O_{3p}$/AC8A composites containing around 5~7wt% of additive Mg indicated the highest strength, and hardness values increased with additive Mg contents. Wear resistance of AC8A alloy were improved by reinforcement of $Al_2O_{3p}$ particles especially at high sliding velocity. Wear property of $Al_2O_{3p}$/AC8A composites and AC8A alloy exhibited different aspects. $Al_2O_{3p}$/AC8A composites indicated more wear loss than AC8A alloy at slow velocity region. However a transition point of wear loss was found at middle velocity region which shows the minimum wear loss and wear loss at high velocity region exhibited almost same value as at slow velocity region, whereas wear loss of AC8A alloy almost linearly increased with sliding velocity. It was found that $Al_2O_{3p}$/AC8A composites containing $Al_2O_{3p}$ volume fraction of 20% exhibited abrasive wear surface regardless of sliding velocity and $Al_2O_{3p}$/AC8A composites containing $Al_2O_{3p}$ volume fraction of 40% showed slightly adhesive wear surface at low sliding velocity, and it progressed to severe wear as increasing the sliding velocity.

• Journal of the Korean Society of Radiology
• /
• v.14 no.1
• /
• pp.7-14
• /
• 2020

The purpose of this study is to assess the usefulness of IR to compensate for uncertainties in inserting high density artificial objects in radiation treatment planning in the 3D-CRT treatment technique. CT images of the subjects with phantom and titanium inserted were obtained from images without IR and images with IR, and the dose evaluation factors HI, MU and volume evaluation factors Volume and PCI were compared. The results of the stainless steel and titanium phantom experiments showed that the volume of high density artificial material was reduced by 4.850% and 11.456% respectively when applying IR. MU decreased 0.924% and 1.181%. HI was down 0.106% and 0.272%. PCI decreased 0.358% and 0.867%. When IR was applied to CT images of subjects with vertebroplasty, Femur alignment pin and wrist alignment pin, the volume of artifacts decreased by 47.76%, 23.841%, and 49.339%. MU also decreased 0.924%, 0.294% and 1.675%, while HI decreased 1.232%, 0.412% and 1.695%. PCI decreases 4.022%, 0.512%, and 13.472%. In conclusion, When IR was applied to 3D-CRT treatment plan, both dose and volume in phantom and subject case with high density artificial insert were reduced.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.1
• /
• pp.29-35
• /
• 2023

Purpose The concentration of PSA (Prostate Specific Antigen) after radical prostatectomy in prostate cancer patients is a predictor of biochemical recurrence, and the AUA (American Urological Association) is defined as biochemical recurrence when the concentration of PSA is measured at 0.2 ng/mL or more, and when the concentration is measured at 0.2 ng/mL or more at the retest. This standard is also applied our hospital. In this laboratory, the PSA reagent using IRMA (Immunoradiometric Assay) is used, and the sensitivity at a very low value was not as good as the reagent used in the department of laboratory medicine. This study aims to increase the reliability of the results by improving the precision and sensitivity of very low values. Materials and Methods As a reagent for the study, PSA reagent using IRMA was used. As a method to improve the precision and sensitivity of very low values, a variation method on the serum volume(25 uL, 50 uL, 100 uL, 200 uL) was studied, and variation usefulness evaluation was conducted. The evaluation items were compared the results of precision, analytical sensitivity, recovery rate, dilution test, high-dose hook effect test, parallel test and very low concentration values(n = 20). Results The validation results were displayed in the order of 25 uL, 50 uL, 100 uL, 200 uL. As the serum volume increased, it was confirmed that CV (Coefficient of Variation)(%) improved. Analytical sensitivity(ng/mL) was 0.038, 0.041, 0.017, 0.015 and recovery rate(%) was 101±3, 101±3, 99±2, 97±4. very low concentration values(ng/mL) between each volume(n=20) were 0.135±0.068, 0.076±0.050, 0.048±0.034, 0.046±0.034. and high dose hook effect appeared as the serum volume increased. Conclusion Through the variation usefulness evaluation, it was confirmed that as the serum volume increased, the precision and sensitivity improved at very low concentration values. However, it is necessary to pay special attention to the occurrence of high-dose hook effect as the serum volume increases. In the case of tests that requires very low concentration values, it is thought that the reliability of the result will be increased if the variation method is properly used after the variation usefulness evaluation.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3464-3464
• /
• 2021

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.127-134
• /
• 2017

The purpose of this study was to assess the impact by comparing the concentration of indoor radon and look for ways to lower the concentration of indoor radon gas measurements of three variables, the year of completion, volume of the building and ventilation. Measurement target is six classrooms on the sixth floor of building that was constructed in 1973 and was extended in 2011. Selected classroom's volume is different. Four classrooms were selected to compare the radon concentration in accordance with the year of completion, Classrooms that is same year of completion were selected to compare the radon concentration in accordance with the volume, six classroom was performed closure and ventilation to compare radon concentration according to ventilation. Radon concentrations in accordance with the year of building completion showed a high concentration of radon in a building recently built. Also, Radon concentration in volume is high the smaller the volume. Radon concentration change according to ventilation showed a reduction of about 80% when the ventilation than during closing. Especially, The radon concentrations were high detected while the recently year of building completion and the smaller volume. Ventilation of the three variables is considered that can be expected to exposure reduction effect by radon affecting the greatest radon concentration reduction.

• Journal of Fashion Business
• /
• v.13 no.6
• /
• pp.137-146
• /
• 2009

This study analyzed hierarchy of image for visual evaluation of flare skirt. This study analyzed expression words about flare skirt with frequency data of image expression words with different length and volume of flare. Stimuli for the study were set to be 4 different volume of flare ($90^{\circ}$, $180^{\circ}$, $270^{\circ}$, $360^{\circ}$) and 3 different length of skirt(48cm, 58cm, 68cm). Stimuli were made by using I-Designer which is Virtual Sewing System. From simulation of flare skirt, the subjects were asked to write down suggested adjective freely and selected 210 adjectives. With this, we chose total 38 adjectives considering frequencies in the pre-study. And we analyzed the combination process of expression words according to construction factor of flare skirt and hierarchy of image from dendrogram which was resulted by hierarchical cluster analysis. 'Feminine' got high score in all 12 flare skirt. When the skirt was short, it was vivid, and as the skirt got longer, ordinary and pure image showed. Also, as the volume of flare got larger, the average of visual effect was higher than visual image. Visual hierarchy construction according to construction factors of flare skirt could be divided into visual image and visual effect, and visual image was shown to be form 'A type - large volume of flare and short skirt length', 'H type-small volume of flare and short skirt length' and 'X type - large volume of flare and long skirt length'.

• Environmental Analysis Health and Toxicology
• /
• v.14 no.1_2
• /
• pp.45-54
• /
• 1999

Quantitative strucrure-activity relationships between the toxicity (LD$\_$50/) and molecular properties of amine and nitro compounds were tested. The all 19 compounds showed low correlations below 0.500 to their LD$\_$50/ values. When amine or nitro compounds were taken separately, the correlation between the calculated chemphysico parameters and LD$\_$50/ were also poor (r$^2$=0.4911, 3967 repectively). The overall relationships among the QSAR parameters were investigated. Molecular weight shows a high correlation with total surface area (r$^2$=0.9287); 0.9090 for zero-order connectivity and second-order connectivity : 0.8784 for bioconcentration factor and second-order connectivity. When amine compounds were taken to perform the statistical treatment, the relationships between parameters were as follows: 0.8436 for volume-negentropy; 0.8925 for volume-bioconcentration factor; 0.9929 for zero-order connectivity-Kow; zero-order connectivity-bioconcentration factor; 0.9141 for zero-order connectivity-solubility; 0.9718 for solubility-bioconcentration factor; 0.9894 for solubility-bioconcentration factor and 0.9319 for Kow-bioconcentration factor. On the other hand, nitro compounds showed different relationships as follows: 0.8952 for volume-I/O character; 0.9520 for volume-total surface area: 0.9351 for volume-molecular weight; 0.9351 for volume-MW; 0.9961 for Kow-Koc; 0.8455 for Kow-bioconcentration factor; 0.8879 for Koc-bioconcentration factor; 0.9987 for MW-total surface area respectively.

• Korea-Australia Rheology Journal
• /
• v.16 no.1
• /
• pp.47-54
• /
• 2004

Low Reynolds number, dilute, and surfactant-free bubble suspensions are prepared by mechanical mixing after introducing carbon dioxide bubbles into a Newtonian liquid, polyol. The apparent shear viscosity is measured with a wide-gap parallel plate rheometer by imposing a simple shear flow of capillary numbers(Ca) of the order of $10^{-2}$ ~ $10^{-1}$ and for various gas volume fractions ($\phi$). Effects of capillary numbers and gas volume fractions on the viscosity of polyol foam are investigated. At high capillary number, viscosity of the suspension increases as the gas volume fraction increases, while at low capillary number, the viscosity decreases as the gas volume fraction increases. An empirical constitutive equation that is similar to the Frankel and Acrivos equation is proposed by fitting experimental data. A numerical simulation for deformation of a single bubble suspended in a Newtonian fluid is conducted by using a newly developed two-dimensional numerical code using a finite volume method (FVM). Although the bubble is treated by a circular cylinder in the two dimensional analysis, numerical results are in good agreement with experimental results.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.28-36
• /
• 2010

Today We have three full series of the annals of Joseon Dynasty. Taebaeksan volume which is one of them shows comparatively good maintenance but Taebaeksan volume also decomposed in patches. The size of cover and inner paper were increased in late Joseon Dynasty, but the weight, thickness and basis weight bears no relation to each other. The oxidation index of paper in annals of pre-periods of King Sunjo shows very high value. After the annals of King Sunjo, the oxidation index of paper is very similar to today's Hanji. L.a.b values of inner paper in the Taebaeksan volume are similar generally. The average length of fiber using image analysis soft ware is 8.08~9.92 mm, that like immediate value of measurement. The air fraction of fiber's range is 1.20~2.12%. It lower than today's Hanji. After considering the factors of the length of fiber, air fraction and FE-SEM, we reached that no difference between raw material of inner paper in the Taebaeksan volume.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.3
• /
• pp.61-71
• /
• 2015

In this study, visual evaluation was performed with changes in peplums design to provide data which can enhance wearing image effects at the production of peplums one-piece. According to changes in volume and position of peplums, a total of 9 stimulants were chosen. Then, they were evaluated using a seven-point rating scale against 50 fashion students. The data has been analyzed by Factor Analysis, ANOVA, $Scheff{\acute{e}}$'s Test and the MCA method. The results of the study are as follows : 1. According to factor analysis, the components of visual evaluation depending on the changes in volume and position variations of peplums were divided into four factors: elegance, individuality, upper body correction and upper body emphasis. 2. According to visual evaluation depending on changes in the position variations of peplum, 'high waist' and 'natural waist' revealed a significant difference in elegance, individuality and upper body correction. 'Low waist' was observed in all four positions. 3. According to visual evaluation depending on the changes in volume of peplums, a significant difference at $45^{\circ}$ was observed in except for elegance. Significant differences at $90^{\circ}$ and $180^{\circ}$ were observed in all four positions. 4. In terms of interactions over in volume and position variations of peplums, interaction effects were found in two factors.