• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.642-646
• /
• 2008

Signaling system, for which ensuring safe train operation, must be a fail-safe system with higher reliability and safety. TCS has made significant improvements both on signaling system, from relay based ground signaling system to computer based on-board system, and on driving mode, form low speed and low density driving to TCS supporting high speed and high density driving. In addition, TCS has been applied to rolling stock with a wide variety of context according to the characteristics of rolling stock or railway infrastructure. In this paper, therefore, we confirmed the basic concept of ATC system and analyzed its development process in technology context via referencing international cases and ATC systems introduced and applied in Korea. Based on those analyses, we suggested the new TCS development strategy for its suitable application to high speed line, conventional line and metro, and we also provided technical considerations related to TCS application.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.6
• /
• pp.81-85
• /
• 2015

The purpose of this study is to evaluate energy savings for inverter driving multi-stage centrifugal pump. Variable speed driving pump system has high efficiency compared with constant speed driving pump system. Because of difficulty to estimate operating efficiency of variable speed driving pump system, energy saving rates are used to replace operating efficiency. energy saving rates are calculated from pump input power and pump duty cycle. But another researches have used pump duty cycles of each season for energy saving rate. In this study, for estimating energy saving rate more high accuracy, pump duty cycles are measured for 1 year. pump duty cycles, depending on the season and be classified according to the weekday/weekend or during the week day. By this pump duty cycles, Energy saving rate is calculated appropriately.

• Journal of Magnetics
• /
• v.21 no.3
• /
• pp.405-412
• /
• 2016

In general, surface mounted PM synchronous motors (SPMSMs) are mainly adopted as a driving motor for high-speed applications, because they have high efficiency and high power density. However, the SPMSMs have some weak points such as the increase of magnetic reluctance and additional losses as a consequence of using a non-magnetic sleeve. Especially, the magneto-motive force (MMF) in the air-gap of the SPMSMs is weakened due to the magnetically increased resistance. For that reason, a large amount of PM is consumed to meet the required MMF. Nevertheless, it cannot help using the sleeve in order to maintain the mechanical integrity of a rotor assembly in high-speed rotation. Thus, in this paper, a multi-layer interior PM synchronous motor (IPMSM) not using the sleeve is presented and designed as an alternative of a SPMSM. Both motors are evaluated by test results based on a variety of characteristics required for an air blower system of a fuel cell electric vehicle.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.7
• /
• pp.673-678
• /
• 2013

Driving gear units can be affected by various problems, including those associated with external or internal defects in the bearing, problems with the lubricant oil, high-loading of the railway, and frequent impacts generated by rail joints. Temperature monitoring is a basic method in diagnosing abnormal conditions in the reduction gear and other components. This paper describes a new wireless monitoring system for the temperature diagnosis of abnormal conditions of the reduction gear. Integrated circuit (IC)-type temperature sensors were installed in the reduction gear box of a high-speed railway car. The temperature data from the reduction gear were acquired and analyzed in situ during high-speed rail operation. Analysis of these data was used to alert the driver and/or maintenance personnel when problems occurred.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.647-650
• /
• 2005

A new driving scheme, Address and Display Period Complex Driving for Expanding Gray Scale(ACE), is proposed by mixing Address Display period Separated(ADS) and Address While Display(AWD). In this method scan lines are divided in blocks driving by AWD and scan lines in block progress sequential high speed addressing. ADS driving get accomplished in low gray level for expanding gray scale. Scan time is reduced and the number of subfields is increased by high speed addressing of ACE. That expands the gray scale and decreases the dynamic false contour. Also, that improves contrast by using ramp reset.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.1
• /
• pp.11-27
• /
• 2016

Objective: The purpose of this study was to develop and evaluate high technology adaptive driving controls, such as mini steering wheel-lever system and joystick system, for the people with physical disabilities in the driving simulator. Background: The drivers with severe physical disabilities have problems in operation of the motor vehicle because of reduced muscle strength and limited range of motion. Therefore, if the remote control system with driver-by-wire technology is used for adaptive driving controls for people with physical limitations, the disabled people can improve their quality of life by driving a motor vehicle. Method: We developed the remotely controlled driving simulator with drive-by-wire technology, e.g., mini steering wheel-lever system and joystick system, in order to evaluate driving performance in a safe environment for people with severe physical disabilities. STISim Drive 3 software was used for driving test and the customized Labview program was used in order to control the servomotors and the adaptive driving devices. Thirty subjects participated in the study to evaluate driving performance associated with three different driving controls: conventional driving control, mini steering wheel-lever controls and joystick controls. We analyzed the driving performance in three different courses: straight lane course for acceleration and braking performance, a curved course for steering performance, and intersections for coupled performance. Results: The mini steering wheel-lever system and joystick system developed in this study showed no significant statistical difference (p>0.05) compared to the conventional driving system in the acceleration performance (specified speed travel time, average speed when passing on the right), steering performance (lane departure at the slow curved road, high-speed curved road and the intersection), and braking performance (brake reaction time). However, conventional driving system showed significant statistical difference (p<0.05) compared to the mini steering wheel-lever system or joystick system in the heading angle of the vehicle at the completion point of intersection and the passing speed of the vehicle at left turning. Characteristics of the subjects were found to give a significant effect (p<0.05) on the driving performance, except for the braking reaction time (p>0.05). The subjects with physical disabilities showed a tendency of relatively slow acceleration (p<0.05) at the straight lane course and intersection. The steering performance and braking performance were confirmed that there was no statistically significant difference (p>0.05) according to the characteristics of the subjects. Conclusion: The driving performance with mini steering wheel-lever system and joystick control system showed no significant statistical difference compared to conventional system in the driving simulator. Application: This study can be used to design primary controls with driver-by-wire technology for adaptive vehicle and to improve their community mobility for people with severe physical disabilities.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.252-255
• /
• 2014

In the case of long-stator linear drives, unlike rotative drives for which speed or position sensors are a single unit attached to the shaft, these sensors extend along the guideway. The position signal transmitted from maglev vehicle can't meet the need of the real-time propulsion control. In this paper the position estimator for propulsion inverter driving long stator linear synchronous motor (LSLSM) in high speed maglev train is proposed. In order to get the higher resolution of the position information transmitted from vehicle, Full order state observer is proposed for position estimator.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.127-134
• /
• 2013

PURPOSES: Speeding is often the primary contributor to fatal crashes. Surprisingly, driving behaviors are indirectly affected by personal factors such as law-abidance, risk sensitivity, and situational adaptability. This research aims to verify the effectiveness of pavement markings at reducing the speeds of high-risk drivers. The purpose of this study is to establish how drivers (including law-abiding or law-breaking, high-risk or low-risk) react to different pavement markings in a driving simulator. METHODS: The five different pavement markings were selected from markings used in other nations. The forty-two drivers were then surveyed, via questionnaires, and placed into the corresponding groups. Finally, statistical analysis was conducted to determine the extent of speed reduction for each pavement marking. RESULTS: Higher speeds were linked to the high-risk drivers. Furthermore, after analysis of the mean difference of average speeds by pavement marking, it was determined that Dragon's Teeth had the greatest speed reducing effect on these drivers. CONCLUSIONS: Perceptual countermeasures are unlikely to strongly affect high-risk drivers' perception of speed on the curves. This statistically demonstrates that Dragon's Teeth have a subtle effect on reducing speeds in the driving simulator. This study's significance lies in the improved understanding of high-risk drivers in terms of road facilities. It approaches the effects of various patterns of pavement markings for high-risk drivers.

• Composites Research
• /
• v.37 no.2
• /
• pp.86-93
• /
• 2024

The inner foam structure plays an important role in the performance of the carbon-fiber-reinforced plastic (CFRP) rear spoiler used in automobiles. However, there is still a lack of studies for the CFRP-based rear spoiler according to the type of inner foam, especially under the high-speed driving condition. With this motivation, we numerically analyze the performance of the CFRP rear spoiler using various cases of the inner foam under the highspeed driving condition. Here, polymethacrylimide (PMI), polyvinyl chloride (PVC), and styrene acrylonitrile (SAN) resins are employed as the inner foams in this work. The performances are evaluated using the deformation aspects and vibration characteristics when the driving condition is a high-speed condition (200 km/h). Furthermore, to specifically verify the importance of the inner foam in the high-speed condition, we additionally investigate the performance of the CFRP rear spoiler without the inner foam structure (i.e., hollow type). As a result, it is confirmed that among the types of inner foams utilized in this work, the PMI and PVC inner foams have the best deformation aspect and vibration characteristic, respectively. Note that the hollow-type inner foam has inferior performances compared to other inner foams invoked in this study. Consequently, through this study, it can be confirmed that the inner foam structure can significantly improve the performance of the CFRP spoiler under high-speed driving condition (200 km/h), and also that the strengths of the CFRP spoiler can manifest differently depending on the types of inner foam core.

• The Korean Journal of Emergency Medical Services
• /
• v.4 no.1
• /
• pp.95-100
• /
• 2000

This is a study to evaluate the effects of the safety of ambulance driving and traffic accidents and to provide statistic information for the various factors to reduce the ambulance traffic accidents. The major instruments of this study were Korean Self-Analysis Driver Opinionnaire. This Questionnaire contains 8 items which measure drivers' opinions or attitudes: driving courtesy, emotion, traffic law, speed, vehicle condition, the use of drugs, high-risk behavior, human factors. The total of 145 divers were investigated ambulance drivers in Taejon City and others(6 City) from 2000. 5. July to 2000. 11. July. The data were analyzed by the path analysis - with SPSS and AMOS package program. The result are as follows : 1. It have suggested that risk factors of ambulance traffic accident much affected with emotion and speed control on safety ambulance driving(Y(Accident) = $0.88{\times}1$(Emotion Control) + $0.92{\times}2$(Speed) - $0.46{\times}3$(Traffic Law)+E). 2. It have suggested that risk factors of ambulance traffic accident much affected with emotion and speed control on safety ambulance driving(Y(Accident) = $0.398{\times}1$(Emotion Control) + $0.500{\times}2$(Speed) - $0.263{\times}3$(Traffic Law)+E) by coefficiecial structural analysis.