• 한국지반신소재학회논문집
• /
• 제11권4호
• /
• pp.1-8
• /
• 2012

본 논문에서는 실대형 실험을 통해 블록식 보강토옹벽에서 보강재의 타입에 따른 수평토압, 변위, 보강재의 변형률의 특성을 비교하였다. 본 연구를 통해 보강재의 타입에 따라 토압과 변위관계에서 서로 다른 거동특성을 보이고 있으며, 보강토체 내에 배치된 보강재가 연직토압 감소 및 변체변위 억제 효과 등 보강 성능이 있음을 확인할 수 있었다. 수평토압은 보강재의 특성과 변형에 따라 상단부와 하단부에서 주동토압이나 정지토압보다 크게 발생할 수 있으며, 수평토압과 벽체변위는 서로 상관성이 매우 높은 관계를 가지는 것으로 나타났다. 블록식 보강토 옹벽에서 보강재의 등고변형률선 분포는 중앙부분에서 가장 큰 변형이 발생하는 것을 확인하였다.

• 한국전산유체공학회지
• /
• 제19권4호
• /
• pp.14-19
• /
• 2014

This study conducts shape optimization of rib turbulator on the internal cooling passage that has triangular cross-section of high pressure turbine nozzle. During optimization, various types of rib turbulator including angled, V-shaped, A-shaped and angled rib with intersecting rib are considered. Each type of rib turbulator is parameterized with attack angle(s), rib height, spacing ratio and bending/intersecting location. For optimization, Design of Experiment (DOE) and Kriging surrogate model are used to utilize computational resource more efficiently and Genetic Algorithm (GA) is used to search the optimum points. As a result, Pareto front of each type of rib turbulator with friction factor that relates to pressure drop in cooling passage and spatially averaged Nusselt number that relates to heat transfer on the wall is drawn and optimum points on the Pareto front are suggested.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.1-6
• /
• 2008

This experiments are perfol1ned to investigate the effect of ventilation velocity on a high pressure water mist tire suppression in train. The experiment is conducted in half scale modeled train of a steel-welled enclosure (5.0m${\times}$2.4m${\times}$2.2m). The ventilation velocity is controlled by the ventilation duct through an inverter in the range of 0 to 3m/s. The coverage-radius and an injection angle of an high pressure water mist system are measured. The mist nozzle with 5-injection holes is operated with pressure 60bar. The heptane pool fires are used. The fire extinguishment times and the temperature are measured for the ventilation velocities. In conclusion, because the momentum of injected water mist is more dominant than that of ventilation air, the characteristics of water mist, the fire extinguishment times and the temperature are affected very little by ventilation velocity.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1307-1312
• /
• 2007

This experiments are performed to investigate the effect of ventilation velocity on a high pressure water mist fire suppression in subway train. The experiment is conducted in half scale modeled train of a steel-welled enclosure (8.0m*2.4m*2.1m). The ventilation velocity is controlled by the ventilation duct through an inverter in the range of 0 to 2 m/s. The coverage-radius and an injection angle of an high pressure water mist system are measured. The mist nozzle with 7-injection holes is operated with pressure 80 bar. The heptane pool fires are used. The fire extinguishment times and the temperatures are measured for the ventilation velocities. In conclusion, because the momentum of injected water mist is more dominant than that of ventilation air, the characteristics of water mist, the fire extinguishment times and the temperatures are affected very little by ventilation velocity.

• 한국추진공학회지
• /
• 제2권1호
• /
• pp.78-87
• /
• 1998

본 연구에서는 유로의 상류와 하류에 오리피스를 가지는 일정 단면적의 관로에 충격파를 감금시킴으로써, 고압력의 배기가스 유동을 감압처리하는 새로운 방법을 시도하였다. 이론해석에서는 일차원 점성 압축성 유동이론을 두 오리피스를 가지는 내부유동에 적용하여 이론계산을 수행하였다. 실험에서는 충격파 풍동을 이용하여, 압력측정과 유동장의 광학관찰을 수행하였다. 그 결과 충격파를 관내에 감금하기 위해서는 관의 마찰계수를 크게 하는 것이 바람직하다는 것을 알았다. 또 상류 오리피스의 단면적을 일정하게 하는 경우, 하류의 오리피스 단면적을 변화시킨다고 하더라도 전압의 감소량은 크게 변화하지 않았으나, 하류 오리피스의 단면적을 일정하게 하는 경우, 상류 오리피스의 단면적을 작게 할수록 전압감소량은 커진다는 것을 알았다. 본 연구의 결과는 각종 플랜트에서 발생하는 고압의 배기가스유동에 대한 새로운 처리법으로 유용하리라 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2242-2244
• /
• 1999

Recently, An important research field of pulsed power is high voltage, high power generation with exploding wire opening switch. Another point of view exploding wire effects have been researched for generation of the pulsed high pressure shock wave. Theoretical considerations of the shock pressure generation along with experiment results are presented in this paper and. Some experimental results of hard rock fracturing show the possibilities of commercial using.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1304-1306
• /
• 1996

A regenerative signal amplifying gate driver of self-excited electronic ballast is presented. It can be used for high pressure sodium (HPS) lamp without auxiliary external ignitor. Since the HPS lamp requires very high ignition voltage at start up, the resonant frequency of the circuit must be increased to obtain high voltage oscillations in spite of relatively small resonant current. The presented gate driver amplifies the current of gate drive transformer and raises the gate-source voltage Quickly to turn on the MOSFET switches. Hence, the resonant frequency can be increased more than 100kHz. The HPS lamp used in the simulation and experiment has the rating of 400W input power at 220V input ac voltage source. The experiments show that the resonant frequency is above 150kHz at start up.

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.59-63
• /
• 2013

A bendable electronic module has been developed for a mobile application by using a low-cost roll-to-roll manufacturing process. In flexible embedded electronic module, a thin silicon chip was embedded in a polymer-based encapsulating adhesive between flexible copper clad polyimide layers. To confirm reliability and durability of prototype bendable module, the following tests were conducted: Moisture sensitivity level, thermal shock test, high temperature & high humidity storage test, and pressure cooker tester. Those experiments to induce failure of the module due to temperature variations and moisture are the experiment to verify the reliability. Failure criterion was 20% increase in bump resistance from the initial value. The mechanism of the increase of the bump resistance was analyzed by using non-destructive X-ray analysis and scanning acoustic microscopy. During the pressure cooker test (PCT), delamination occurred at the various interfaces of the bendable embedded modules. To investigate the failure mechanism, moisture diffusion analysis was conducted to the pressure cooker's test. The hygroscopic characteristics of the encapsulating polymeric materials were experimentally determined. Analysis results have shown moisture saturation process of flexible module under high temperature/high humidity and high atmosphere conditions. Based on these results, stress factor and failure mechanism/mode of bendable embedded electronic module were obtained.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1016-1021
• /
• 2005

A piezoresistive pressure sensor using a silicone rubber membrane has been fabricated on the selectively diffused (100)-oriented n/n+/n silicon substrates by a unique silicon micromachining technique using porous silicon ething. The width, length and thickness of the beam were 120${\mu}m$, 600${\mu}m$ and 7${\mu}m$, respectively and the thickness of the silicone rubber membrane was 40${\mu}m$. By the fusion of silicon beam and silicone rubber membrane, the mechanical strength of the pressure sensor could be highly improved due to smaller shear stress. The effectiveness of the sensor was confirmed through an experiment and FEM simulation in which the pressure sensor was characterized.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.25-30
• /
• 2000

Plate and shell heat exchanger(P&SHE) has been applied to the refrigeration and air conditioning systems as evaporators or condensers fur their high efficiency and compactness. The purpose of this study is to analyze the characteristics of pressure drop in plate and shell heat exchanger. An experiment for single phase (low pressure drop in plate and shell heat exchanger was performed. Also numerical work was conducted using the FLUENT code for $ {\kappa}-{\varepsilon}$ model. The dependence of friction factor on geometrical Parameters was numerically investigated. The study examines the internal flow and the pressure distribution in the channel of plate and shell heat exchanger. The results of CFD analysis compared with experimental data, and the difference of frictor factor in plate side and shell side are 10% and 12%, respectively. Therefore, the CFD analysis model is effectively predict the performance of plate and shell heat exchanger.