• The Journal of the Acoustical Society of Korea
• /
• v.13 no.4
• /
• pp.77-85
• /
• 1994

In this study an adaptive algorithm with optimum convergence factor for steepest descent method is proposed, which controls automatically the filter order to take the appropriate level. So far, fixed order filters have been used when adaptive filter is employed according to the priori knowledge or experience in various adaptive signal processing applications. But, it is so difficult to know the filter order needed in real implementations that high order filters have to be performed. As a result, redundant calculations are increased in the case of high order filters. The proposed variable length optimum convergence factor (VLOCF) algorithm takes the appropriated filter order within the given one so that the redundant calculation is decreased to get the enhancement of convergence speed and smaller convergence error during the steady state. The proposed algorithm is evaluated to prove the validity by computer simulation for system Identification.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.9-15
• /
• 2015

Various studies with regard to increasing the optical efficiency of plasmonic color filters have previously been conducted, such as mixing materials or applying diverse pattern shapes. Fundamentally, it is important to maximize the photonic crystal effect by finding the optimum periods of lattice as well as calculating the most efficient transmission area. In this study, we propose a technical method for optimizing the plasmonic color filters that have a high color gamut and luminance by analyzing the light spectrums based on the 1931 color coordinate system. Moreover, we suggest a calculation method in order to define the individual color purity of red and green and blue filters. Consequently, efficiency values are obtained independently from each color filter by evaluating the color purity and the luminance. The final result obtained from simulation are 27.6% of relative luminance and 25.3% of color gamut. The proposed optimization method is applicable to all plasmonic color filters having photonic crystal arrays.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.2
• /
• pp.227-232
• /
• 1988

A semicustom VLSI design fo digital filters used in TDM/FDM transmultiplexer is described. A filter bank composed of only all-pass digital filter sections are implemented with the polyphase network. The use of all-pass filters as basic building blocks is shown to provide a trans-multiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler system is used to reduce the design time and to increase the credibility of designed filters. As a prototype, 1st and 2nd order all pass filter are designed, using CMOS N-well double metal technology. The chip sizes of first order filter and the second order filter are 2652 x 533\ulcorner\ulcorner 5334x4300\ulcorner\ulcorner respectively.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.71-76
• /
• 2021

Digital decimation filters are used in various digital signal processing systems using ADCs, including digital communication systems and sensor network systems. When the sampling rate of digital data is reduced, aliasing occurs. So, an anti-aliasing filter is necessary to suppress aliasing before down-sampling the data. Since the anti-aliasing filter has to have a sharp transition band between the passband and the stopband, the order of the filter is very high. However, as the order of the filter increases, the complexity and area of the filter increase, and more power is consumed. Therefore, in this paper, we propose two types of decimation filters, focusing on reducing the area of the hardware. In both cases, the complexity of the circuit is reduced by applying the required down-sampling rate in two times instead of at once. In addition, CIC decimation filters without a multiplier are used as the decimation filter of the first stage. The second stage is implemented using a CIC filter and a down sampler with an anti-aliasing filter, respectively. It is designed with Verilog-HDL and its function and implementation are validated using ModelSim and Quartus, respectively.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.2
• /
• pp.115-121
• /
• 2002

This paper presents an evolutionary design of digital IIR filters using the genetic algorithm (GA) with modified genetic operators and real-valued encoding. Conventional digital IIR filter design methods involve algebraic transformations of the transfer function of an analog low-pass filter (LPF) that satisfies prescribed filter specifications. Other types of frequency-selective digital fillers as high-pass (HPF), band-pass (BPF), and band-stop (BSF) filters are obtained by appropriate transformations of a prototype low-pass filter. In the GA-based digital IIR filter design scheme, filter coefficients are represented as a set of real-valued genes in a chromosome. Each chromosome represents the structure and weights of an individual filter. GA directly finds the coefficients of the desired filter transfer function through genetic search fur given filter specifications of minimum filter order. Crossover and mutation operators are selected to ensure the stability of resulting IIR filters. Other types of filters can be found independently from the filter specifications, not from algebraic transformations.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.1
• /
• pp.88-93
• /
• 2016

LCL filters are widely used in high-order harmonics attenuation of output currents in grid-connected inverters. However, output currents of grid-connected inverters with LCL filters can become unstable because of the resonance of the filters. Given that the characteristics of output currents in inverters mostly depend on filter performance, the exact analysis of filters by considering parasitic components is necessary for both harmonics attenuation and current control. LCL filters have three or four parasitic components: the series and/or parallel resistance of the filter capacitor and the series resistance of the two filter inductors. Most studies on LCL filters have focused on the parasitic components of the filter capacitor. Although several studies have addressed the parasitic components of the filter inductor at the inverter side, no study has yet investigated the concurrent effects of series resistance in both filter inductors in detail. This paper analyzes LCL filters by considering series resistance in both filter inductors; it proposes an active damping method based on the virtual series resistance of LCL filters. The performance of the proposed active damping is then verified through both simulation and experiment using Hardware-in-the-Loop Simulator(HILS).

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.74-86
• /
• 2005

In this paper, we proposed an algorithm for the approximation of high order FIR filters by low order IIR filters to efficient implementing two channel 3-D surround sound systems using Head-related transfer functions(HRTFs). The algorithm is based on a concept of the balanced model reduction. The binaural sounds using the approximated HRTFs are reproduced by headphone, and serves as a cue of sound image localization. HRTFs of dummy-head are approximated from 512-order FIR filters by 32-order IIR filters and compare with each other. .Experiment of sound image are carried out for 10 participants. We perform the experiment based on computer simulation and hardware experiment with TMS320C32. The results of the experiments show that the localization using the approximated HRTFs is the same accuracy as the case of FIR filters that simulate the HRTFs.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.171-173
• /
• 2000

In this paper, we present a new interpolation method for the color filter away(CFA). In order to capture color images. typical input devices use a single chip CCD imaging sensor with color filter array. As a result, the single chip CCD does not provide sufficient color resolutions since it arranges different color filters sequentially on a single CCD, resulting in aliasing noise and loss of resolution. In order to reconstruct high quality color images, we propose to use the interpolation algorithm using high order B-splines. Experiments show promising results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1011-1014
• /
• 2006

Turbo blower generates high peaks when it operates at high pressure region. The fan of the air-cleaner system, operates especially high pressure region due to several filters, generates high noise level. In this case, the tonal sound of BPF makes people annoyance. The blower of air-cleaner has several high resistance filters in its inlet area and rotates above 900rpm Moreover, for the compact design, the size of the blower should be reduced 10%. The reduced diameter of blower makes low flow rate and high noise level. In order to reduce the noise, new blade shape was suggested and optimized

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.7
• /
• pp.634-642
• /
• 2004

Unlike actual vehicles, a vehicle driving simulator is limited in kinematic workspace and bounded on dynamic characteristics. So it is difficult to simulate dynamic motions of a multi-body vehicle model. In order to overcome these problems, a washout algorithm which controls the workspace of the simulator within the kinematic limitation is needed. However, a classical washout algorithm contains several problems such as generation of wrong sensation of motions by filters in tilt coordination, requirement of trial and error method in selecting the proper cut-off frequencies, difficulty in returning the simulator to its origin using only high pass filters and etc. This paper proposes a new tilt coordination method as an algorithm which gives more accurate sensations to drivers. In order to reduce time for returning the simulator to its origin, a new washout algorithm that the proposed algorithm selectively onset mode from high pass filters and return mode from error functions is proposed. As a result of this study, the results of the proposed algorithm are compared with the results of classical washout algorithm through the human perception models. Also, the performance of the suggested algorithm is evaluated by using human perception and sensibility of some drivers through experiments.