• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.415-421
• /
• 2014

In this paper, reactorless high efficiency boost DC/DC converter for EV is proposed. In proposed converter, improves efficiency because decrease power loss when the switches are turned on/off using zero current switching (ZCS) at all switch of primary full bridge. By replacing reactance ingredients of L-C resonance circuit for ZCS with leakage inductance ingredients of high frequency transformer, it reduces system size and expense because of not add special reactor. For validity verification of proposed converter, in the paper implements simulation using PSIM and perform experiment by making 5KW DC/DC converter. In experimental results, efficiency of proposed converter conformed superiority.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1582-1590
• /
• 1998

Combustion-driven oscillations in a surface burner have been investigated to clarify their characteristics. A model combustor is made and the oscillation frequencies are measured for various dimensions of the combustor. It is found that there are two modes of oscillations; one is the 'acoustic mode' at high frequencies, associated with the acoustic mode of the combustion system and the other is the 'combustion mode' at low frequencies around 100 Hz, associated with the instability of the flame. Acoustic mode is excited when the surface burner is placed where the phase of particle velocity leads that of acoustic pressure by $90^{\circ}$, for all the combustion conditions. Combustion mode is driven at high combustion rate by the lift of unstable flame near the lower limit of the combustible equivalence ratio. Combustion mode is greatly influenced by the inlet temperature of the premixed gas. When the inlet temperature is very high, the combustion mode does not occur.

• 한국정밀공학회지
• /
• 제26권9호
• /
• pp.103-111
• /
• 2009

Multi-climbing hydraulic robots are used to lift construction factory (CF) synchronously for applications in the automation of a high-rise building construction. In this study, synchronous motion controller is proposed for the hydraulic robots, whose strategy is not only to make each robot follow the reference path basically by sliding-mode control, but also to synchronize motions of two adjacent cent robots consecutively by cross-coupled control technique. Simulations are performed by using SIMULINK for a system similar to a practical application that includes unbalance in CF and wind disturbance. The results show that the proposed controller significantly reduces synchronous errors, compared to the individual controller for each hydraulic robot.

• 해양환경안전학회지
• /
• 제18권6호
• /
• pp.591-596
• /
• 2012

안전하며 친환경적인 근해운송시스템을 확보하기 위해서는 운송 수단인 선박의 안전한 운항 확보가 필수적이다. 특히 좌초, 충돌 등의 해난사고를 방지하기 위해서는 선박이 우수한 조종성능을 갖는 것이 요구되며 특히 조종성능 중에서 선회성능은 충돌 회피 등에 필수적인 성능이다. 본 연구에서는 선박에 부착된 조타기의 타력 증가가 선박의 선회성능에 미치는 영향을 모형선 실험을 통하여 고찰하였다. 먼저 Coanda 효과를 이용한 고 양력 타 장치 모형과 47 K PC의 모형선을 제작하였다. 또한 모형선의 선회 성능 실험을 위한 자유항주시스템을 구축하고 사각 수조에서의 타력 증가 값을 변화시켜가면서 모형선의 선회 성능을 계측하여 타력 증가에 따른 선회 성능의 변화를 평가하였다. 모형선의 선회성능 실험결과를 통해 타력 증가가 근해운송 선박의 선회 성능 향상에 효과적인 것을 확인하였다.

• 한국정밀공학회지
• /
• 제25권8호
• /
• pp.96-103
• /
• 2008

In this study, we performed the biomechanical analysis of cervical plate systems by using a computer simulation based on finite element method to derive reliable model by analysis of design variables and fatigue behavior. To simulate the cervical spine movement in-vivo state by surgery, we modeled the cervical plate system which consisted of screws, rings, rivets, and plate and Ultra High Molecular Weight Polyethylene (UHMWPE) Block. The experiment of cervical plate system followed the ASTM F1717 standards that covered the materials and methods for the static and fatigue testing. The result of computer simulation is compared with experimented test. We expected this study is to derive reliable results by analysis of design variables and fatigue behavior for developing a new model.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.60.2-60.2
• /
• 2011

This study is to develop a 1kW-class small wind turbine blade which will be applicable to relatively low speed regions. For this blade, a high efficiency wind turbine blade is designed and a light and low cost composite structure blade is adopted considering fatigue life. In this study, shape design of 1kW-class small wind turbine blade for hybrid power generation system is carried out by BEMT(blade element momentum theory). X-FOIL open software was used to acquire lift and drag coefficients of the 2D airfoils used in power prediction procedure. Moreover, pressure and velocity distributions are investigated according to TSR by CFD analysis.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.453-458
• /
• 2008

Pump of high lift use to development of a technological level according as a building grow big. Water-Hammer to increase by valve of fast to closing agreeably to pipe laying to accept electronic valve, because by a damage of piping-system and the devil knows injury of vibration. Water-Hammer take a low effect to various method for solve. A New type manufacture develop and testing of pipe line to same to axis use to accumulator for water-Hammer to low effect and liner control of pressure. Impact-pressure of absorption ability and confirmation to decrease of vibration level through to preexistence manufactures and comparative test. Water-hammer and pipe vibration make low of piping system.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.1963-1970
• /
• 2014

본 연구는 특별교통수단을 이용하고 있는 장애인들의 만족도와 장애인들의 장애수용과 삶의 질에 어떠한 영향을 미치는지 살펴보기 위한 조사연구이다. 이를 위해 제주특별자치도 교통약자이동지원센터의 차량을 이용하는 장애인을 대상으로 설문조사하였으며, 최종분석에는 총81부가 사용되었다. 수집된 자료는 SPSS 18.0을 이용하여, 기술통계 및 다중회귀분석을 실시하였다. 분석결과, 특별교통수단을 이용하는 이유로 휠체어 리프트 차량이라는 응답이 제일 많았으며, 특별교통수단 만족도의 수준에서도 휠체어와 관련된 안전성이 가장 높았다. 반면 이용절차와 관련된 편리성은 만족도가 가장 낮았다. 특별교통수단 만족도 중 안전성이 높을수록 삶의 질(만족감과 의식주)에 긍정적인 영향을 미치는 것으로 확인되었다. 따라서 장애인의 특별교통수단 만족도를 높이고 장애인의 삶의 질을 향상시키기 위해 이동권 확보를 위한 휠체어 리프트 차량 추가 지원과 안전 운행 및 이용절차의 개선이 필요하다.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1749-1755
• /
• 2010

파워 글라스 시스템의 특성은 주로 윈도우 레귤레이터의 거동 특성과 글라스 런에 의한 저항에 의해 결정되며, 시험 결과 분석을 통해 시스템의 성능을 예측한다. 본 논문에서는 시험적인 방법의 한계를 해결하기 위해, 익스플리시트 코드를 사용한 해석적 방법을 제안하였다. 해석 모델에 사용한 글라스 런은 무니-리블린 모델을 사용하여 모델링 하였고, 다양한 조건에서의 마찰 시험을 실시하여 마찰계수를 구하였다. 또한, 윈도우 레귤레이터 파트의 메커니즘은 패스트 벨트 시스템과 슬립 링요소를 사용하여 모델링 하였고, 상승 시 발생하는 전류와 하중과의 상관관계 분석을 통해 레귤레이션 메커니즘의 신뢰성을 검증하였고, 모터의 특성을 고려하여 신뢰성 있는 글라스 상승 시간을 예측하였다.

• KSBB Journal
• /
• 제6권3호
• /
• pp.231-240
• /
• 1991

Recently, developments of large scale and high density cell culture methods have been the objects of many researches, because the demand of various pharmaceutical products produced by animal cell culture has been rapidly increasing. The cell culture equipment should have the requirements such as sufficient oxygen transfer and mixing, low shear stress and surface tension, and small foaming. In order to develop a proper bioreactor meeting these requirements simultaneously, a perfluorocarbon having high solubility of oxygen was sprayed into the medium as an oxygen carrier instead of air. Also, a new impeller was developed and combined together with the perfluorocarbon spraying system so as to design a new bioreartor for cell cultivation. The new impeller had better characteristics of mixing and oxygen transfer than the paddle and cell-lift impellers based on the same, shear rate. But, it was observed that the volumetric oxygen transfer coefficient of the new bioreactor decreased with increasing cell density during E. coli fermentation.