• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.309-309
• /
• 2007

The LTCCs (low-temperature co-fired ceramics) are very important for electronic industry to build smaller RF modules and to fulfill the necessity for miniaturization of devices in wireless communication industry. The dielectric materials with sintering temperature $T_{sint}$<$900^{\circ}C$ are required. In this study, we investigated with glass-ceramic composition, which was crystallized with two crystals. The microstructure, crystal phases, thermal and mechanical properties, and dielectric properties of the composites were investigated using FE-SEM, XRD, TG-DTA, 4-point bending strength test and LCR measurement. The starting temperature for densification of a sintered body was at $779{\sim}844^{\circ}C$ and the glass frits were formatted to the crystal phases, $CaAl_2Si_2O_8$(anorthite) and $CaMgSi_O_6$(diopside), at sintering temperature. The sintered bodies exhibited applicable dielectric properties, namely 6-9 for ${\varepsilon}_r$. The results suggest that the glass-ceramic composite would be potentially possible to application of low dielectric L TCC materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.60-60
• /
• 2008

We manufactured Liquid Crystal Polymer (LCP) and (1-x)$BaTiO_3-xSrTiO_3$(BST) ceramic composites and investigated dielectric properties to use as embedded capacitor in printed circuit boards and replace LTCC substrates. The dielectric properties of these composites are varied with volume fraction of BST and ratios of BT/ST. Dielectric constants are in the range of 3~28. In addition, we could get low TCC and High Q value that could not achieve in other ceramic-polymer composites. Especially, in composite with x=0.4 and 50vol% BST, the dieletric constant and Q-value are 27 and 300, respectively. And more TCC is -116~145ppm/$^{\circ}C$ in the temperature range of -55~$125^{\circ}C$. We think that this composites can be used high-Q substrate material like LTCC and embedded temperature compensation capacitor in printed circuit boards.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1C
• /
• pp.34-37
• /
• 2012

The paper introduces the an necklace type UHF RFID tag for a live tree having high dielectric constant. When a general UHF RFID tag is used for the metal and the material with high dielectric constant, the electrical characteristics and impedance of antenna have been changed, and the tag is not recognized by an UHF RFID reader. The necklace type UHF RFID tag has been designed with consideration of the high dielectric constant of the tree material. The name tag for a live tree has been designed with the developed tag antenna. The performance of tag has been measured and the reading range is about 4~5m. The developed UHF RFID tag antenna can be applied to any high dielectric material for various industrial applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1241-1244
• /
• 2003

The materials showing high structure dispersity are developed on the natural quartz base and they are obtained by mechano-chemical technology. Depending on the processing conditions and subsequent applications the materials produced by mechano-chemical reaction (MCR) show concurrently magnetic, dielectric and electrical properties. The obtained magnetic-electrical powders classified by aggregate complex of their features as segnetomagnetics, contain a dielectric material as a carrying nucleus, particularly the quartz on that surface one or more layers of different compounds are synthesized having thickness up to $10{\sim}50nm$ and showing magnetic, electrical and other properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.388-389
• /
• 2005

In this paper, the electric properties of mercury Iodide multi-layer samples has been investigated. We measured and analyzed their performance parameters such as the X-ray sensitivity and dark-current for a mercury Iodide multi-layer X-ray detector with a dielectric layer. The digital X-ray image detector can be constructed by integrating photoconduction multi-layer that dielectric layer has characteristics of low dark-current, high X-ray sensitivity. However this process has found to have complexity on the performance of the sample. We have investigate dielectric layer that it substitute dielectric layer for HgO(Mercury Oxide). We have employed two approaches for producing the mercury Iodide sample : 1) Physical Vapor Deposition(PVD) and 2) Particle-In-Binder(PIB). In this paper fabricated by PIB Method with thicknesses ranging from approximately 180um to 240um and we could produce high-quality samples for each technique particular application. As results, the dielectric materials such as HgO between the dielectric layer and the top electrode may reduce the dark-current of the samples. Mercury Iodide multi-layer having HgO has characteristics of low dark-current, high X-ray sensitivity and simple processing. So we can acquired a enhanced signal to noise ratio. In this paper offer the method can reduce the dark-current in the X-ray detector.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.11-13
• /
• 1992

The dielectric reliability of the Thin $SiO_2$ films of wet oxidation on n-type Si substrates has been studied by using self-healing method of breakdown and according to injection time high frequence C-V tests. These experiments have been performed to investigate the dielectric breakdown mechanism of a thin film in which positive charge generation during high-field Fowler-Nordheim tunneling are considered. In addition, The weak spots and robust areas are distinguished so that the localized dielectric breakdown could be described.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.4
• /
• pp.274-280
• /
• 1998

Polycrystalline $Sr_2Nb_2O_7$ ceramics with very high Curie temperature were sintered using the powder derived by the chemical coprecipitation method (CCP). The phase evolution and grain-orientation of sintered samples were examined by XRD, while sintering behavior, dielectric properties and polarization were studied by SEM and ferroelectric tester. Extremely high degree of grain-orientation was observed along the (0k0) direction, which resulted in anisotropic dielectric properties of the sintered samples, with the dielectric constant values approaching those for single crystal. Thin film fabrication of $Sr_2Nb_2O_7$ in the pyroniobate family was also attempted on $SiO_2$/Si(100), Pt/$SiO_2$/Si(100), Pt/Ti/$SiO_2$/Si(100) and Pt/$ZrO_2/SiO_2/Si_2(100)$ substrates, using metalorganic decomposition (MOD) process. Neodecanoate precursor solution was prepared by mixing strontium neodecanoate with niobium neodecanoate synthesized from niobium ethoxide. It was found that $Sr_2Nb_2O_7$ single phase appeared in XRD patterns the samples annealed above $950^{\circ}C$. The effect of substrate type on film microstructure and dielectric properties was observed.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.549-552
• /
• 1987

TO INCREASE THE CELL CAPACITANCE Of SMALL GEOMETRY DRAMS. HIGH DIELECTRIC MATERIAL HAS BEEN USED RECENTLY. THE PURPOSE Of THIS WORK IS TO INVESTIGATE THE STRUCTURAL AND ELECTRICAL CHARACTERISTICS Of SiO2/Si3N4/SiO2 STACKED FILM UTILIZING HIGH DIELECTRIC MATERIAL Si3N4(${\epsilon}=7.5$). IN RESULT, THE DIELECTRIC CONSTANT Of STACKED FILM IS 4.0 - 5.0 AND CAPACITANCE AND BREAKDOWN FIELD WERE MORE INCREASED THAN THOSE Of SiO2 FILM.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.390-397
• /
• 2017

In this paper, we propose a scheme for designing a tunable pixel layer based on a $Ge_2Sb_2Te_5$ (GST) alloy thin film. We show that the phase change of GST can significantly affect the reflection characteristic when the GST film is embedded into a dielectric encapsulation layer. We investigate the appropriate positions of the GST film within the dielectric layer for high diffraction efficiency, and we prove that they are antinodes of Fabry-Perot resonance inside the dielectric layer. Using the proposed scheme, we can increase the diffraction efficiency by about ten times compared to a bare GST film pixel, and 80 times for the first-to-zeroth-order diffraction power ratio. We show that the proposed scheme can be designed alternatively for a broadband or wavelength-selective type by tuning the dielectric thickness, and we discuss a multi-phase example with a double-stack structure.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.167-170
• /
• 2021

Integrated passive device (IPD) technology has emerged with the need for 5G. In order to integrate and miniaturize capacitors inside IPD, various studies are actively performed using high-k materials and trench structures. In this paper, an EM(Electromagnetic) simulation study was performed by applying an oxide dielectric to the capacitors having a various trench type structures. Commercially available materials HfO₂, Al₂O₃, and Ta₂O₅ are applied to non, circle, trefoil, and quatrefoil type trench structures to confirm changes in each material or structure. As a result, the bigger the capacitor area and the higher dielectric constant of the oxide dielectric, the insertion loss tended to decrease.