• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.611-615
• /
• 2014

We report high-speed pulse train generation from a relatively low-speed 10-GHz mode-locked laser by means of line-by-line spectral coding. To increase the pulse repetition rate multiplication (RRM) factor, we combine coding schemes for both spectral intensity and phase by placing a simple mask at the coder focal plane. The resulting RRM factor, determined by multiplying the RRM factors of the individual coding schemes, rises as high as 16. To verify the generated pulses, the optical spectra and autocorrelation traces are examined.

• 한국레이저가공학회지
• /
• 제14권1호
• /
• pp.19-24
• /
• 2011

This work reports the results for laser shock peening of duplex stainless steel (22% Chromium - 5% Nickel) using a pulsed Nd:YAG laser (wavelength = 532nm, pulse width = 8ns). for the application to high-capacity pumps for seawater desalination plants. By properly selecting the process parameters such as laser intensity of 10GW/$cm^2$, laser pulse density of 75pulse/$mm^2$, and $100{\mu}m$ thick aluminum foil as an absorbent coating layer, the surface hardness of duplex stainless steel could be enhanced by 26%, from 256HV to 323HV with little changes in surface morphology and roughness. The depth of laser shock peened layer was measured to be around 2mm. The large enhancement of surface hardness is considered to have high practical importance in minimizing abrasive and corrosive deterioration of pump parts.

• 대한전자공학회논문지SD
• /
• 제46권4호
• /
• pp.15-20
• /
• 2009

레이저 광 산란을 이용한 검출 시스템 및 레이저를 이용한 광학적 검출에 있어서 높은 발광 강도를 통해 궁극적으로 높은 효율의 광 산란 신호를 광검출기에서 얻기 위해서는 발광 레이저빔을 미세유체 칩의 채널 중앙에 집광하는 것이 매우 중요하다. 본 논문을 통해 레이저 광 산란을 이용한 세포 검출을 위해 PDMS 마이크로렌즈가 집적화된 PDMS 미세유체 칩을 소개하고자 한다. 기존에 제작된 PDMS 미세유체 칩 위에 간편히 정렬하여 올려놓아 사용함으로써 검출 효율을 증가시킬 수 있는 PDMS 마이크로렌즈를 제작하였다. PDMS 마이크로렌즈는 포토레지스트 리플로우와 PDMS 복제 몰딩에 의해 제작되었다. 이 제작 방법은 간단하며 높은 치수 정확성 및 좋은 마이크로렌즈의 성능을 제공한다. PDMS 미세유체 칩 위에 집적화된 PDMS 마이크로렌즈가 적혈구를 이용한 레이저 광 산란을 통한 세포 검출 실험에서 레이저 강도를 증가시켜 신호대잡음비 및 감도를 증가시킴을 검증하였다.

• 한국전자파학회지:전자파기술
• /
• 제4권3호
• /
• pp.18-29
• /
• 1993

장거리 초고속 단일모드 광파이버 전송 시스템에서, 색분산은 복조된 파형의 찌그러짐을 생기게 하며, 그 결과 수신된 신호 간 간섭을 일으켜 전송 시스템의 성능을 저하시킨다. 본 논문에서는 강도변조-직접검파 시스 댐의 색분산제한을위상변조에서 진폭변조로의 전환잡음의 영향을고려함으로서 연구하였다. 파이버 색분산에 의한 위상-진폭으로의 전환잡음을 잡음전력 스펙트럼 밀도를 유도함으로서 분석하였으며 위상-진폭 전환잡음을 피하기 위한 시스댐 전력손실과 레이저 선폭에 대한 요구조건을 수치해석을 통하여 구하였다.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.143-150
• /
• 2003

Experimental research has been carried out to investigate the characteristics of the fatigue crack initiation and propagation behavior of Tailor Welded Blank(TB) sheet used for vehicle body. We used three types of specimens which were machined of the same base metal: one is 1.4mm thick, another is 1.6mm thick, and the third(TB specimen) is laser-welded of two specimens(1.4mm and 1.6mm thick ones). The results of tensile and hardness test indicate that the yield strength of the TB specimen is the highest, and the hardness around welding bead is higher than that of base metal. Fatigue strength and fatigue limit of the TB specimen are much superior to those of the base metal up to $10^6$ cycles. The fatigue crack propagation of the heat-affected zone of the TB specimen is slower than that of the base metal. Welding bead has the fastest crack Propagation in the low stress intensity factor range$(\DeltaK)$ region, but the slowest in the high $\DeltaK$ region. The fatigue propagation characteristic of the TB specimen is relatively stable in comparison with that of the base metal in the high ${\Delta}K$ region around over $28MPa\sqrt{m}$.

• 대한소아치과학회지
• /
• 제24권1호
• /
• pp.301-312
• /
• 1997

The purpose of this study was to evaluate the analgesic effect on pulp induced by pulsed Nd : YAG laser according to the power density, irradiated time and the method of application (Non-contact vs contact) in vivo. Experiments were carried out on 90 volunteers who have sound 4 canines. Each canine was grouped by the intensity and the time of irradiation of pulsed Nd : YAG laser was measured. Mean EPT response(units) was measured at 5 min, 30 min, and 60 min after irradiation with various intensity(1.5-3W, 15-30Hz), irradiated time (1.5min, 3min), and application method (Non-contact and contact). The results were as follows: 1. 5 minutes after irradiation, the mean EPT response(units) was increased by 32 % in the non-contact method and by 35% in the contact method of application. Which showed significant difference in mean EPT response(units) compared to not-lased canine in each groups(P<0.05). 2. The mean EPT response(units) with irradiating condition according to the various laser intensity, and the irradiation time stastically did not show significant difference in each groups as time elapsed. 3. There was no significant difference between the non-contact and contact method in the mean EPT response(units). 4. The mean EPT response(units) returned to the baseline value within 30 miuntes. In regard to the above results, the analgesic effect on pulp induced by pulsed Nd : YAG laser resulted a slight increase of pulpal pain threshold, but it was not as high as to replace the role of drug analgesia as whole. This technique can be used for inducing pulpal analgesia as adjunct to other pain control methods and is needed to develop better analgesic effects.

• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.578-583
• /
• 2011

We report on the design of a holographic homogenizer composed of a periodic hologram and a condensing lens. If the hologram is periodic, the homogenizer is free from the alignment error of the incident laser beam. Holographic homogenizer also has an advantage of the flexibility in the size of the target beam. We calculated theoretically the Fraunhofer diffracted wave function when a rectangular laser beam is incident on a periodic hologram. The diffracted wave is the sum of sinc functions at regular distance. The width of each sinc function depends on the size of the incident laser beam and the distance between the sinc functions depends on the period of the hologram. We calculated numerically the diffracted light intensity for various ratios of the size of the incident laser beam to the period of the hologram. The results show that it is possible to make the diffracted beam uniform at a certain value of the ratio. The uniformity is high at the central part of the target area and low near the edge. The more sinc functions are included in the target area, the larger portion of the area becomes uniform and the higher is the uniformity at the central part. Therefore, we can make efficient homogenizer if we design a hologram so that the maximum number of the diffracted beams may be included in the target area.

• 한국광학회지
• /
• 제1권1호
• /
• pp.7-11
• /
• 1990

수은 원자 증기에 강한 레이저 광$(10-120GW/\textrm{cm}^2)$을 조사하여 수은 원자의 공명 다광자 이온화 과정을 연구하였다. 파장 560.7nm의 광자 4개를 흡수할 때 공명준위는 $6d ^1D_2$이다. 수은 증기압(0.1-3.0 Torr)과 레이저 파장(559-569nm)을 변화시키면서 큰 강도의 광원과 원자가 상호작용하여 생기는 AC Stark 이동과 line broadening의 변화를 조사하였고, 원자 밀도의 증가에 따라 이온화율의 증가가 둔화되다가 감소되는 것도 관측되었다. 이동계수 $\alpha$=0.6cm-1/GW/$\textrm{cm}^2$로 측정되었다. 특히, 이온화율의 레이저 강도 의존성을 나타내는 비선형 차수를 공명파장에서 측정한 결과 k=3을 얻었으며, 이론적인 결과와 비교하였다.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.7-12
• /
• 2003

Mixture formation in the cylinder of a lean bum engine has been observed by Laser Induced Fluorescence technique. XeCl laser (308nm) was used to produce a laser sheet. 3-pentanone has been added to iso-octane fuel to produce fluorescence, the intensity of which is proportional to the concentration of the fuel. The laser sheet was introduced through the piston window and the fuel distribution in the vertical plane was observed through a side window. Comparison has been made for the cases of selected fuel injection timing as 0, 360, 405, and 450 CA. For the case of 0 and 360 CA injection, uniform fuel distribution in the combustion chamber has been obtained at the ignition time which is favorable for the high load mode. And the late injection cases, 405 and 450 CA, revealed the stratified formation of rich mixture around the spark plug. That extends the lean misfire limit and reduces cyclic variation in the low load mode.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2214-2216
• /
• 2007

Based on a semiconductor optical amplifier and sampled fiber Bragg gratings, polarization-controlled waveband switching in multiwavelength fiber laser is successfully demonstrated at room temperature by using high polarization selectivity of a polarization beam splitter. A multiwavelength-switching operation between eight and six laser lines with signal to noise ratio over 35 dB and wavelength spacing of ${\sim}0.8nm$ has been successfully demonstrated. The switching displacement of the proposed laser was ${\sim}7.1nm$. The intensity unevenness between different laser lines was measured to be less than 6.5 dB. The switching displacement between wavebands (groups of contiguous wavelengths), wavelength channels, and their spacings can be flexibly designed by the selected comb filters.