• 제목/요약/키워드: High-energy density

검색결과 2,429건 처리시간 0.032초

Structural and Electrical Properties of ZrO2 Films Coated onto PET for High-Energy-Density Capacitors

  • Park, Sangshik
    • Applied Science and Convergence Technology
    • /
    • 제23권2호
    • /
    • pp.90-96
    • /
    • 2014
  • Flexible $ZrO_2$ films as dielectric materials for high-energy-density capacitors were deposited on polyethylene terephthalate (PET) substrates by RF magnetron sputtering. The growth behavior, microstructure and electrical properties of the flexible $ZrO_2$ films were dependent on the sputtering pressure and gas ratio. Although $ZrO_2$ films were deposited at room temperature, all films showed a tetragonal crystalline structure regardless of the sputtering variables. The surface of the film became a surface with large white particles upon an increase in the $O_2/Ar$ gas ratio. The RMS roughness and crystallite size of the $ZrO_2$ films increased with an increase in the sputtering pressure. The electrical properties of the $ZrO_2$ films were affected by the microstructure and roughness. The $ZrO_2$ films exhibited a dielectric constant of 21~38 at 1 kHz and a leakage current density of $10^{-6}{\sim}10^{-5}A/cm^2$ at 300 kV/cm.

고밀도 폴리에틸렌 분진의 열분해성과 착화에너지 (Pyrolysis Characteristic and Ignition Energy of High-Density Polyethylene Powder)

  • 한우섭;이정석
    • 한국가스학회지
    • /
    • 제18권3호
    • /
    • pp.31-37
    • /
    • 2014
  • 본 연구에서는 자료 제공을 목적으로 국내 분진폭발사고에서와 동일한 고밀도 폴리에틸렌(high-density polyethylene, HDPE ) 분진을 사용하여 열분해성과 착화에너지를 실험적으로 조사하였다. 폭발 민감도를 측정하기 위하여 시차주사열량계(differential scanning calorimeter, DSC), 열중량분석기(thermo-gravimetric analysis, TGA) 및 최소착화에너지(minimum ignition energy, MIE) 측정장치를 사용하였다. HDPE의 체적기준 평균입경은 $61.6{\mu}m$가 얻어졌으나, 입자 크기에 따른 입자 수밀도(particle number density) 분석에서는 $0.4{\sim}4{\mu}m$의 미세 입자가 98% 이상의 비율을 갖는 것으로 나타났다. TGA 및 DSC 측정결과로부터 HDPE는 $380{\sim}490^{\circ}C$의 온도 구간에서 발화가 일어날 수 있음을 알 수 있었고, MIE는 $1200{\sim}1800g/m^3$의 HDPE의 농도 범위에서 1 mJ 이하로 측정되었는데, 이는 입자 수밀도 기준에 따른 $0.4{\sim}4{\mu}m$의 미세 입자의 비율(98 %)이 매우 높았던 것이 원인으로 판단된다.

High-Performance and Fabrication of Graphene-based Flexible Supercapacitor

  • Ra, Eun Ju;Han, Jae Hee;Kim, Kiwoong;Lee, Sun Suk;Kim, Tae-Ho;An, Ki-Seok;Lim, Jongsun
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.442-442
    • /
    • 2014
  • Although electrochemical capacitors (ECs), also known as supercapacitors or ultracapacitors, is one of the most promising energy-storage devices because of its high power density, super-high cycle life, and safe operation. We herein report a synthesis of graphene-based flexible films by kneading method. Thus, a device can be readily made by sandwiching a polymer membrane included ionic liquid electrolytes between two identical graphene-based flexible films. Devices made with these electrodes exhibit ultrahigh energy density values while maintaining the high power density and excellent cycle stability of ECs. Moreover, these ECs maintain excellent electrochemical attributes under high mechanical stress and thus hold promise for high-energy, flexible electronics.

  • PDF

금속 마스크 스크린이 금속 재결합 전류와 태양전지 특성에 미치는 영향 (Effect of Metal Mask Screen on Metal-induced Recombination Current and Solar Cell Characteristics)

  • 이욱철;정명상;이준성;송희은;강민구;박성은;장효식;이상희
    • Current Photovoltaic Research
    • /
    • 제9권1호
    • /
    • pp.6-10
    • /
    • 2021
  • The mesh mask screen, which is generally used for screen printing metallization of silicon solar cell, requires high squeegee pressure and low printing speed. These requirements are acting as a limiting factor in production yield in photovoltaic industries. In order to improve the productivity, a metal mask, which has high durability and high printing speed, has been researched. In this paper, the characteristics of each solar cell, in which electrodes were formed by using a metal mask and a mesh mask, were analyzed through recombination current density. In particular, the metal-induced recombination current density (Jom) representing the recombination of the emitter-metal interface was calculated using the shading method, and the resulting efficiency and open-circuit voltage were analyzed through the diode equation. As a result of analyzing the proportion of the metal-induced recombination current density to the total emitter recombination current density, it was analyzed that the reduction of the metal-induced recombination current density through the metal mask is an important factor in reducing the total recombination current density of the solar cell.

토종 실용계의 사육밀도 및 사료 내 에너지 수준에 따른 생산성, 혈액, 면역 및 계육 품질에 미치는 영향 (Effects of Stock Density and Nutrient Levels on Growth Performance, Serum Profile, Immune Status and Meat Quality in Korean Native Chickens)

  • 김광열;전진주;김현수;손지선;김희진;유아선;홍의철;강보석;강환구
    • 한국가금학회지
    • /
    • 제48권2호
    • /
    • pp.91-100
    • /
    • 2021
  • 본 연구는 토종 실용계 사육 시 사육밀도와 에너지 함량에 따른 생산성, 혈액 성분, 면역 및 계육품질에 미치는 영향에 대해 구명하고자 수행되었다. 토종닭 병아리 240수를 공시하여 4처리 4반복 반복당 15수씩 완전 임의 배치하였다. 처리구는 사육밀도 2 수준(14, 16 birds/m2)과 에너지 2 수준[ME kcal/kg; High: starter(3,150), grower(3,200), Final(3,250); Low: starter(2,950), grower(3,000), Final(3,050)]으로 2 × 2 요인실험 설계하였다. 체중분석 결과 SD 14 처리구와 EL High 처리구에서 유의적으로 높은 것으로 나타났다. 증체량에서는 초기와 후기에서 에너지 함량에 따라 EL High 처리구가 유의적으로 높게 나타났으며, 전구간에서는 사육밀도와 에너지 함량에 따라 SD 14 처리구와 EL High 처리구가 유의적으로 높게 나타났다. 사료섭취량은 초기, 중기와 전구간에서 사육밀도에 따라 SD 14 처리구가 유의적으로 높게 나타났다. 사료 요구율은 에너지 함량에 따라 EL High 처리구가 유의적으로 낮게 나타났다. 혈액 내 생화학 조성 결과 AST 에서는 사육밀도에 따라 SD 16 처리구가 높게 나타났다. 면역글로블린과 코티솔 분석결과 IgM에서 사육밀도 × 에너지 함량에 따라 유의적인 차이가 나타났으나, 코티솔에서는 유의적인 차이는 나타나지 않았다. 결론적으로 사육밀도가 높을수록 섭취경쟁으로 인하여 AST가 증가하였고, 이로 인해 생산성이 감소되었다. 그리고 에너지 함량이 높을수록 생산성이 개선되었다. 그러나 혈액, 면역 및 계육 품질의 결과는 일정하지 않았으며, 좀 더 자세한 연구가 필요할 것으로 보인다.

Effect of reduced energy density of close-up diets on metabolites, lipolysis and gluconeogenesis in Holstein cows

  • Huang, Wenming;Wang, Libin;Li, Shengli;Cao, Zhijun
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제32권5호
    • /
    • pp.648-656
    • /
    • 2019
  • Objective: An experiment was conducted to determine the effect of reduced energy density of close-up diets on metabolites, lipolysis and gluconeogenesis in cows during the transition period. Methods: Thirty-nine Holstein dry cows were blocked and assigned randomly to three groups, fed a high energy density diet (HD, 1.62 Mcal of net energy for lactation $[NE_L]/kg$ dry matter [DM]), a medium energy density diet (MD, $1.47Mcal\;NE_L/kg\;DM$), or a low energy density diet (LD, $1.30Mcal\;NE_L/kg\;DM$) prepartum; they were fed the same lactation diet to 28 days in milk (DIM). All the cows were housed in a free-stall barn and fed ad libitum. Results: The reduced energy density diets decreased the blood insulin concentration and increased nonesterified fatty acids (NEFA) concentration in the prepartum period (p<0.05). They also increased the concentrations of glucose, insulin and glucagon, and decreased the concentrations of NEFA and ${\beta}-hydroxybutyrate$ during the first 2 weeks of lactation (p<0.05). The plasma urea nitrogen concentration of both prepartum and postpartum was not affected by dietary energy density (p>0.05). The dietary energy density had no effect on mRNA abundance of insulin receptors, leptin and peroxisome proliferator-activated $receptor-{\gamma}$ in adipose tissue, and phosphoenolpyruvate carboxykinase, carnitine palmitoyltransferase-1 and peroxisome proliferator-activated $receptor-{\alpha}$ in liver during the transition period (p>0.05). The HD cows had higher mRNA abundance of hormone-sensitive lipase at 3 DIM compared with the MD cows and LD cows (p = 0.001). The mRNA abundance of hepatic pyruvate carboxy-kinase at 3 DIM tended to be increased by the reduced energy density of the close-up diets (p = 0.08). Conclusion: The reduced energy density diet prepartum was effective in controlling adipose tissue mobilization and improving the capacity of hepatic gluconeogenesis postpartum.

Low Cost High Power Density Photovoltaic Power Conditioning System with an Energy Storage System

  • Jang, Du-Hee;Han, Sang-Kyoo
    • Journal of Power Electronics
    • /
    • 제12권3호
    • /
    • pp.487-494
    • /
    • 2012
  • A new low cost high power density photovoltaic power conditioning system (PV PCS) with an energy storage system is proposed in this paper. Its high power density and cost effectiveness can be achieved through the unification of the maximum power point tracker and the battery charger/discharger. Despite the reduced power stage, the proposed system can achieve the same performance in terms of maximum power point tracking and battery charging/discharging as the conventional system. When a utility power failure happens, the proposed system cannot perform maximum power point tracking at the UPS mode. However, the predetermined battery voltage near the maximum power point of the PV array can effectively generate a reasonable PV power even at the UPS mode. Therefore, it features a simpler structure, less mass, lower cost, and fewer devices. Finally, to confirm the operation, validity, and features of the proposed system, a theoretical analysis and experimental results from a single phase AC 220Vrms/1.5kW prototype are presented.

Conversion-Alloying Anode Materials for Na-ion Batteries: Recent Progress, Challenges, and Perspective for the Future

  • Kim, Joo-Hyung;Kim, Do Kyung
    • 한국세라믹학회지
    • /
    • 제55권4호
    • /
    • pp.307-324
    • /
    • 2018
  • Rechargeable lithium-ion batteries (LIBs) have been rapidly expanding from IT based applications to uses in electric vehicles (EVs), smart grids, and energy storage systems (ESSs), all of which require low cost, high energy density and high power density. The increasing demand for LIBs has resulted in increasing price of the lithium source, which is a major obstacle to wider application. To date, the possible depletion of lithium resources has become relevant, giving rise to the interest in Na-ion batteries (NIBs) as promising alternatives to LIBs. A lot of transition metal compounds based on conversion-alloying reaction have been extensively investigated to meet the requirement for the anodes with high energy density and long life-time. In-depth understanding the electrochemical reaction mechanisms for the transition metal compounds makes it promising negative anode for NIBs and provides feasible strategy for low cost and large-scale energy storage system in the near future.

Pulse Density Modulated Zero Voltage Soft-Switching High-Frequency Inverter with Single Switch for Xenon Gas Dielectric Barrier Discharge Lamp Dimming

  • Sugimura, Hisayuki;Suh, Ki-Young;Lee, Hyun-Woo;Nakaoka, Mutsuo
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2006년도 춘계학술대회 논문집
    • /
    • pp.391-394
    • /
    • 2006
  • This paper presents soft switching zero voltage switching high frequency inverter for rare gas fluorescent lamp using dielectric-barrier discharge phenomenon. The simple high-frequency inverter can completely achieve stable zero voltage soft switching (ZVS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZVS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this high frequency Inverter are illustrated as compared with computer simulation results and experimental ones. Its light dimming characteristics due to power regulation scheme are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proven from the practical point of view.

  • PDF