• 방사선산업학회지
• /
• 제7권1호
• /
• pp.23-28
• /
• 2013

In this study, we fabricated high density polyethylene (HDPE) composites filled with antioxidants and UV stabilizers. The electron beam irradiation on the fabricated composites was carried out over a range of absorbed doses from 50 to 200 kGy to confirm the changes of discoloration. The changes of discoloration were characterized using a color difference meter and FT-IR for confirming the changes of the color difference and structural change. It was observed that the color difference of IRGANOX 1010-, IRGAFOS 168-, and TINUVIN 328- added HDPE was higher than that of the control HDPE by electron beam irradiation. The melting temperature of UV stabilizer-added HDPE was not significantly changed by electron beam irradiation. However, the melting temperature of phenol-containing antioxidant-added HDPE was increased with increasing the absorbed dose. And the melting temperature of phosphorus-containing antioxidant-added composite was decreased with increasing the absorbed dose.

• 산업식품공학
• /
• 제14권4호
• /
• pp.354-358
• /
• 2010

The methods for determining the diffusion parameters for the diffusion of d-limonene, a major volatile compound of orange juice, through a multi-layered food packaging material and predicting its absorption into the packaging material have been investigated. The packaging material used was the 1.5-mm thick multi-layered packaging material composed of high impact polystyrene (HIPS), polyvinylidene chloride (PVDC), and low density polyethylene (LDPE). Orange juice was placed in a cell where volatiles were absorbed in the sample package and kept at $23{\pm}2^{\circ}C$ for 72 hr. The d-limonene absorbed in a 1.5-mm thick multi-layered food packaging material was analyzed by a solid phase micro-extraction (SPME). The absorption parameters for the absorption of d-limonene in the packaging material were determined and absorption of d-limonene into the packaging material was predicted using absorption storage data. The SPME desorption at $60^{\circ}C$ for 1 hr resulted in the most sensitive and reproducible results. The diffusion coefficients of d-limonene in the packaging material and the partition coefficient at $23{\pm}2^{\circ}C$ were approximately $1-2{\times}10^{12}m^2$/s and 0.03, respectively. The absorption profile no earlier than 30 hr was fit well by a model derived from the Fick's law.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.7-13
• /
• 2019

Recycling of waste polyvinyl chloride plastics has attracted much attention due to environmental problems, but the poor mechanical properties, low thermal stability, frequent breakage of strands, and melt cracking of the waste plastics have limited their widespread use. To overcome these disadvantages of waste PVC (W-PVC), recycled PVC powder blend was prepared by adding high-density polyethylene (HDPE) and ethylene vinyl acetate (EVA) as a heat stabilizer and compatibilizer, respectively. An intermeshing co-rotating twin screw extruder was used to prepare the blend, and the characteristics of the blend were analyzed by SEM and TGA, and by using a UTM and Izod impact tester. The impact strength was improved as the EVA content increased for the W-PVC/HDPE (80/20 wt%) blend. As the HDPE and EVA contents increased in the W-PVC/HDPE/EVA blend, the impact strength increased. SEM observations also revealed the improved interfacial adhesion for the EVA-containing blend.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.942-948
• /
• 2021

The aim of this work is to help inform the decision for choosing a convenient material for the PGAA (Prompt Gamma Activation Analysis) collimator plug to be installed at the tangential channel of the Moroccan Triga Mark II Research Reactor. Two families of materials are usually used for collimator construction: a mixture of high-density polyethylene (HDPE) with boron, which is commonly used to moderate and absorb neutrons, and heavy materials, either for gamma absorption or for fast neutron absorption. An investigation of two different collimator designs was performed using N-Particle Monte Carlo MCNP6.2 code with the ENDF/B-VII.1 and MCLIP84 libraries. For each design, carbon steel and lead materials were used separately as collimator heavy materials. The performed study focused on both the impact on neutron beam quality and the neutron-gamma background at the exit of the collimator beam tube. An analysis and assessment of the principal findings is presented in this paper, as well as recommendations.

• Steel and Composite Structures
• /
• 제44권1호
• /
• pp.105-117
• /
• 2022

Impact resistance efficiency of the newly designed sandwich beam with a laterally arched core as bio-inspired by the woodpecker is numerically investigated. The principal components of the beam comprise a dual-core system sandwiched by the top and bottom laminated CFRP skins. Different materials, including hot melt adhesive, high-density polyethylene (HDPE), acrylonitrile butadiene styrene (ABS), epoxy resin (EPON862), aluminum (Al6061), and mild carbon steel (AISI1018), are considered for the side-arched core layer of the beam for impact efficiency assessment. The aluminum honeycomb takes the role of the second core. Contact force, stress, damage formation, and impact energy for beams equipped with different materials are examined. A diversity in performance superiority is noticed in each of these indicators for different core materials. Therefore, for overall performance appraisal, the impact resistance efficiency index, which covers several chief impact performance parameters, of each sandwich beam is computed and compared. The impact resistance efficiency index of the structure equipped with the AISI1018 core is found to be the highest, about 3-10 times greater than other specimens, thus demonstrating its efficacy as the optimal material for the bio-inspired dual-core sandwich beam system.

• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.127-132
• /
• 2023

본 연구에서는 필라멘트 와인딩 공법을 적용한 Type 4 압력용기의 설계를 수행하였다. 수소저장용 탱크의 설계인 점을 고려하여 누설을 방지하기 위해 라이너는 고분자 고밀도 폴리에틸렌(HDPE)을 적용하였고 복합재 구조는 카본/에폭시를 Hoop 방향과 Helical 방향으로 적층하여 설계하였다. 이론적 접근으로 Helical 섬유의 각도와 Hoop, Helical 각각의 섬유 두께를 결정하여 설계하였다. 설계에 대한 안전성은 상용소프트웨어인 ANSYS를 활용하여 유한요소 해석으로 검증하였다.

• 한국수산과학회지
• /
• 제43권4호
• /
• pp.331-339
• /
• 2010

Shrimp farming is the most important mariculture industry on the west coast of South Korea. However, it has suffered from mass mortality due to viral disease outbreaks and coastal pollution due to water discharge. This study developed an intensive shrimp culture method for outdoor ponds, without water exchange, which minimizes the chance of viral transmission from the environment, reduces coastal pollution by water discharge and enhances shrimp production. A culture trial was conducted in two high-density polyethylene (HDPE)-lined ponds with a $550\;m^2$ surface area. The ponds were stocked with postlarvae of Litopenaeus vannamei, the major farmed shrimp species in Korea, on July 10, 2007, and cultured for 90 days with no water exchange. The stocking density of the postlarvae (B.W. 0.0015 g) was $272\;ind./m^2$, which is eight times higher than in traditional pond culture in Korea. At harvest, the total production of ponds 1 and 2 was 1,362kg ($2.48\;kg/m^2$) and 1,282 kg ($2.33\;kg/m^2$), respectively. This is 20~22 times higher than the mean farmed shrimp production ($0.112\;kg/m^2$) in Korea and about eight times higher than in traditional ponds with a good harvest. Although there was no water exchange throughout the culture period, the mean concentrations of unionized ammonia and nitrite-nitrogen were as low as 0.038 and 6.0 mg/L, respectively. The feed conversion rate (FCR) was 1.38, which is 20~45% lower than that of traditional pond cultures. The high efficiency of the diet in this study is thought to be due to a well-managed feeding strategy and well-developed bioflocs used as diet additions for the shrimp. The final body weight of the shrimp at harvest was low (12.2~12.5 g), compared with that of traditional pond culture. This may have resulted from the combination of a short culture period, high density of shrimp, and low temperature. This study suggests that a super-intensive shrimp pond culture method using biofloc technology with no water exchange can minimize viral transmission via water exchange, reduce coastal pollution, and enhance shrimp production.

• 환경위생공학
• /
• 제4권1호
• /
• pp.17-28
• /
• 1989

Having studied the production of monoclonal antibodies for developing a diagnosis medicine which shall be detected by a high-sensitivity test by using Rhodotorula rubra as a fungi-host which had been extracted through biochemical tests and follow-up examinations on Yeast-like fungi obtained from pulmonary tissues of pulmonary tuberculosis patients who had been in Kong ju National Tuberculosis Hospital from Jun. to Dec. in 1987, I. have gained such results as follows: 1. The fusion rate was influenced by feeder cell layers, cell density and time required to the cell fusion with cells in myelona subculture. 2. The fusion rate did not show any significant difference when the cell was applyed with two molecular weights, i.e., 1500 and 4000, of polyethylene glycol. 3. Fused cells after the addition of HAT selection media were bright and round, whereas unfused myelona cells and spleen cells were shrunk and granulated. 4. The cell fusion rate turned out to be about $57.2\%$(150 wells / 264 wells). 5. $10\%$(15 wells / 150 wells) of the positive reaction was detected in monoclonal antibody screening. 6. The titer which had reacted positively to Rhodotorula rubra fungal-host was 800 times in density after the gradual dilution of the produced monoclonal antibodies with Indirect ELISA method. 7. The Strongest specific reaction came out after the peroxidase labelled anti-human Immunogobulin had been applyed to Rhodotorula rubra for activating its nature after making drift with Carbonate-bicarbonate buffer (pH 9.6) and drying completely.

• 상하수도학회지
• /
• 제31권6호
• /
• pp.599-609
• /
• 2017

Desalination plants have been recently constructed in many parts of the world due to water scarcity caused by population growth, industrialization and climate change. Most seawater desalination plants are designed with a submarine pipeline for intake and discharge. Submarine pipelines are installed directly on the bottom of the water body if the bottom is sandy and flat. Intake is located on a low-energy shoreline with minimal exposure to beach erosion, heavy storms, typhoons, tsunamis, or strong underwater currents. Typically, HDPE (High Density Polyethylene) pipes are used in such a configuration. Submarine pipelines cause many problems when they are not properly designed; HDPE pipelines can be floated or exposed to strong currents and wind or tidal action. This study examines the optimal design method for the trench depth of pipeline, analysis of on-bottom stability and dilution of the concentrate based on the desalination plant conducted at the Pacific coast of Peru, Chilca. As a result of this study, the submarine pipeline should be trenched at least below 1.8 m. The same direction of pipeline with the main wind is a key factor to achieve economic stability. The concentrate should be discharged as much as high position to yield high dilution rate.

• 멤브레인
• /
• 제26권4호
• /
• pp.310-317
• /
• 2016

리튬이온 이차전지는 리튬이온이 이동하면서 전기화학적 충방전사이클을 완성하는 에너지변환장치를 의미한다. 리튬이온 이차전지는 높은 에너지밀도와 낮은 자가방전률, 상대적으로 긴 수명주기 등 다양한 장점을 갖는다. 최근 전기차 수요증가는 고용량 리튬이온 이차전지 개발을 촉진하고 있으나 음극에서의 dendrite 형성으로 인한 전기적 단락 현상과 전지 폭발 문제와 같은 심각한 안전문제를 야기한다. 또한, 리튬이온 이차전지 구동시 상승된 온도에서 폴리올레핀계열(예 : 폴리에틸렌과 폴리프로필렌) 격리막의 열수축 문제가 발생한다. 이와 같이 낮은 열 안정성은 리튬이온 이차전지의 성능과 수명의 감소로 이어진다. 본 연구에서는 폴리올레핀계열 함침격리막 제조를 위한 중요한 소재로서 술폰화 폴리아릴렌에테르술폰 랜덤 공중합체를 사용하였으며, 제조된 격리막을 이용하여 dendrite 형성과 관련된 금속이온 흡착 능력과 리튬이온전도성, 열적 내구성이 평가되었다.