• 생물환경조절학회지
• /
• 제12권4호
• /
• pp.207-216
• /
• 2003

고온기 분식 칼랑코에 재배에 있어 문제는 고온 스트레서에 의한 생장의 억제로, 본 연구는 지하부 및 지상부의 생장을 촉진을 시킬 수 있다고 알려진 근권 생장촉진미생물(Pseudomonas sp. B와 Pseudomonas sp. D2)을 선발하여 사용하였으며 천연물로서는 alginoligosaccharide와 glucosamine oligosaccharide를 사용하였다. 또한 이들의 AG-용액과 단일 및 복합 처리하여 재배 온도차이를 부여한 경우 칼랑코에의 생장에 미치는 영향을 조사하였다. 상이한 지하부 온도조건은 25$^{\circ}C$, 30$^{\circ}C$ 및 35$^{\circ}C$로 처리하여, 2주후 초장, 엽장,엽폭, 엽면적, 엽중, 지상부 생체중, 근장, 근중을 조사하였다. 25$^{\circ}C$처리구에서는 초장, 엽면적, 엽중, 근중 모두 Pseudomonas sp. B와 glucosamine oligosaccharide를 혼합한 처리구가 가장 높았고, 30$^{\circ}C$의 경우 초장과 엽중은 glusosamine oligosaccharide처리에서, 엽면적과 근중은 Pseudomonas sp. D2와 algin-oligosaccharide를 처리구에서 가장 좋은 생장 효과를 나타내었다. 35$^{\circ}C$의 경우는 초장, 엽면적, 엽중, 근중 모두 Pseudomonas sp. B와 glucosamine oligosaccharide를 혼합한 처리구에서 효과가 컸다. 이상의 결과로 보아 고온기 칼랑코에의 분화 재배시 문제가 되는 생장억제현상은 천연제재와 미생물 제재를 혼합처리 함으로써 크게 개선시킬 수 있었다.

• 한국정밀공학회지
• /
• 제26권3호
• /
• pp.88-97
• /
• 2009

The vacuum die casting techniques can diminish the porosity of products and provide better surface appearance by the ordinary high pressure die casting process. The vacuum system can also reduce the cold laps in the die casting process and minimize the overflow pockets of the die. The vacuum system does not need high pressures to die cast compared to the ordinary die casting process, and so enables die casting of large parts for a given machine size. Parts made by the vacuum system have higher strength and more elongation than parts made by the ordinary die casting systems. In this paper, we designed and produced the Magnesium seat frames using the vacuum die casting processes. The new Magnesium seat frame was designed to satisfy safety regulations. Some safety test procedures of the seat frame were simulated by the finite element method. We obtained 10% weight reduction by design modification of seat frames compared to the current model. Flow simulations were carried out to minimize the trial and error in producing the parts. The die casted parts using vacuum systems resulted in better mechanical characteristics and no defects compared to those without vacuum systems.

• 산업경영시스템학회지
• /
• 제33권2호
• /
• pp.33-38
• /
• 2010

To survive head-to-head competition, we should keep our labor productivities above those of other nations. However, our labor productivities are low compared to those of the developed countries. It is the well-known fact that we make up for the productivities with long work hours. Entering the line of developed nations safely and enjoying well-being age freely, we need to achieve high labor productivities without sacrificing work hours. What would be a fine solution? Back to the basics! Although it is important to enforce R&D on high-tech products, we should have so-called bluebird philosophy, being faithful to the basics and trying to find solutions at a stone's throw. Basics of basics may be unceasing improvement, establishing reasonable standard times, and maintaining them. To support going back to the basics, this thesis proposes VITAMAX, a motion and time study software. As VITAMAX stands for "Visual Improvement and Time Analysis for Maximizing Profits", it provides a simple and powerful visual tool which is useful for improving manual works and determining standard times. Since VITAMAX is based on the Microsoft Excel and VBA, it is very cost-effective and easy to use. VITAMAX may contribute to the profit increase of manufacturing companies, especially for the small and medium-sized enterprise.

• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.215-221
• /
• 2020

The paradigm of agriculture is also changing to address the problem of food shortages due to the increase of the world population, climate conditions that are increasingly subtropical, and labor shortages in rural areas due to aging population. With the development of Information Communication Technology (ICT), our daily lives are changing rapidly and heralds a major change in agricultural management. In a hyper-connected society, the introduction of high-tech into traditional Agriculture of the past is absolutely necessary. In the development process of Agriculture, the first generation produced by hand, the second generation applied mechanization, and the third generation introduced automation. The fourth generation is the current ICT operation and the fifth generation is artificial intelligence. This paper investigated Smart Farm that increases productivity through convergence of Agriculture and ICT, such as smart greenhouse, smart orchard and smart Livestock. With the development of sustainable food production methods in full swing to meet growing food demand, Smart Farming is emerging as the solution. In overseas cases, the Netherlands Smart Farm, the world's second-largest exporter of agricultural products, was surveyed. Agricultural automation using Smart Farms allows producers to harvest agricultural products in an accurate and predictable manner. It is time for the development of technology in Agriculture, which benchmarked cases of excellence abroad. Because ICT requires an understanding of Internet of Things (IoT), big data and artificial intelligence as predicting the future, we want to address the status of theory and actual Agriculture and propose future development measures. We hope that the study of the paper will solve the growing food problem of the world population and help the high productivity of Agriculture and smart strategies of sustainable Agriculture.

• 대한약침학회지
• /
• 제25권2호
• /
• pp.121-129
• /
• 2022

Objectives: The chemical composition of cactus pear seed oil (Opuntia ficus-indica [L.] Mill.) was analyzed in terms of its fatty acid composition, tocopherol content, phenolic identification, and the oil's phenolic-rich fraction antioxidant power was determined. Methods: Fatty acid profiling was performed by gas chromatography coupled to an FI detector. Tocopherols and phenolic compounds were analyzed by LC-FLD/UV, and the oil's phenolic-rich fraction antioxidant power was determined by phosphomolybdenum, DPPH assay and β-carotene bleaching test. Results: Fatty acid composition was marked by a high unsaturation level (83.22 ± 0.34%). The predominant fatty acid was linoleic acid (66.79 ± 0.78%), followed by oleic acid (15.16 ± 0.42%) and palmitic acid (12.70 ± 0.03%). The main tocopherol was γ-tocopherol (172.59 ± 7.59 mg/kg. In addition, Tyrosol, vanillic acid, vanillin, ferulic acid, pinoresinol, and cinnamic acid were identified as phenolic compounds in the analyzed seed oil. Moreover, the oil's phenolics-rich fraction showed a significant total antioxidant activity, scavenged DPPH up to 97.85%, and effectively protected β-carotene against bleaching (97.56%). Conclusion: The results support the potential use of cactus pear seed oil as a functional food.

• 지질공학
• /
• 제31권4호
• /
• pp.731-739
• /
• 2021

본 연구는 토양 보전을 위한 표토 특성 분석 및 심토의 표토촉진화가 목적으로써 지질별 표토와 심토의 물리화학적 특성을 비교하고 정량적 차이를 분석하였다. 토양 시료는 암종별로 총 102개 지역에서 204개 시료를 채취하였으며 입도분석, 함수율, 단위중량, X-선 형광분석, X-선 회절분석에 대한 실험을 수행하고 표토와 심토에 대해 분석하였다. 분석결과 표토와 심토의 물리적 특성 차이가 확인되었으며 표토의 풍화변질지수가 심토보다 높게 나타났다. 이는 표토가 심토보다 풍화에 직접적인 영향을 더 많이 받기 때문에 점토광물의 함량이 높게 나타나는 것으로 판단되며 특히 버미큘라이트의 경우 풍화에서 발생하는 최종산물이므로 표토에서 특히 많이 나타난다.

• Design & Manufacturing
• /
• 제14권1호
• /
• pp.42-48
• /
• 2020

Titanium alloy has been in the spotlight as a core material in high-tech industries that require high strength and light weight because it has excellent strength and corrosion resistance and strength is higher than that of steel. Therefore, in various industries, existing steel products are intended to be replaced with titanium alloys. Titanium alloys can cause cutting tool breakage during cutting, and heat generated during cutting does not dissipate, accumulates in tools and workpieces, resulting in large wear and tear on thin workpieces. In addition, since titanium alloy is a metal with high chemical activity, the wear of the tool becomes more severe when the cutting speed is high, so machining of titanium bolt through cutting is very disadvantageous in terms of productivity. Therefore, the production of bolts using titanium alloys is being produced through a forging process to improve productivity and product quality. In this paper, hot forging molding analysis was performed on bolts used for fastening automobile parts using Ti-6Al-4V alloy, which is the most commonly used titanium alloy.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.15-20
• /
• 2012

Brazing technology has been widely used among bonding technologies because it enables to bond various metals, even ceramics, dissimilar metals, and give higher bonding strength, cost down, automation, etc. However, there are many parameters to achieve optimal brazing joint such as brazing alloys, brazing atmospheres, designs and brazing methods, etc. The brazing parameters affect seriously on the characteristic of final brazing products. Stainless steel is broadly used in high temperature applications, chemical industry, heat exchangers, muffler of vehicles, and so on. Accordingly, in this article, brazing alloys, forms of brazing alloys, brazing methods and atmospheres for stainless steel were described.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.7-13
• /
• 2015

The production processes were reviewed through the injection analysis of the shift lever as a core component of an auto lever installed in the automatic transmission of cars. The injection analysis was carried out for the shift lever and rod among the components in a shift lever module. The shift lever and rod are designed for injection molding with the insertion of a tube, a pin cable plate, and a steel rod for securing the strength of the product. The charging time, failure of injection molding, weld line, air trap, and deformation were reviewed according to this insert. Analyses on various gate positions were carried out for reviewing the cultivation and deformation of fiber around major components, such as the generation section of manipulation feeling and assembly section, so that optimal gate conditions might be reviewed and reflected in the mold design. Finally, we plan to compare the analysis results with the production of trial products.

• 한국가구학회지
• /
• 제20권3호
• /
• pp.239-246
• /
• 2009

The joinery technique, as one of manufacturing techniques for the wooden furniture, influences the production process, the economic efficiency, and the diversification of design. Especially, the usage of machine tools can determine how much the students can enhance their design expression capabilities during the practice class in furniture design courses of domestic universities, in accordance with whether to utilize the machine tools or not, and how much and frequent to use the machine tools. The study proved that the joinery techniques, based on the high-tech machine, has more efficiencies in the various aspects, including the easiness to manufacture the products, and the diversity of design than the joinery technique, based on the handcraft-only. As the ground of this, this study estimated the time to produce the wooden furniture by machine tools and by handcraft-only, each. Also, this study show the comparison of the features of three different joinery techniques. On the basis of this comparison, this study made the conclusion that the machine-based joinery technique, which is used in the practice class, is the best method to bring the best results in manufacturing the wooden furniture.