• Journal of the Semiconductor & Display Technology
• /
• v.10 no.3
• /
• pp.1-6
• /
• 2011

In this paper, the IC(Integrated Circuit) for multi-channel synchronous communication was designed by using FPGA and VHDL language. The existing chips for synchronous communication that has been used commercially are composed for one to two channels. Therefore, when communication system with three channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 synchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 1024 bytes respectively and consequently high speed communication became possible. It was designed with a communication signal of a form various encoding. To detect errors of communications, the CRC-ITU-T logic and channel MUX logic was designed with hardware logics so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. In order to show the performance of designed IC, the test was conducted successfully in Quartus simulation and experiment and the excellence was compared with the 85C3016VSC of ZILOG company that are used widely as chips for synchronous communication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.2
• /
• pp.115-121
• /
• 2013

LED-ID (Light Emitting Diode-Identification) network is envisioned to be the next generation indoor wireless communication medium by which simultaneously high speed data transmission, identification, and illumination are possible. In spite of being extremely promising, it suffers from much impairment. Signals having different propagation paths can suffer from delays, and phase shifts which will eventually result interference. The probability of interference is also increased when communication links are established between a tag and several readers. Therefore it is necessary to reduce the interference in LED-ID network to ensure quality of service. It is possible to avoid interference by knowing the information about readers prior to assign the available spectrum. In this paper, we have proposed dynamic spectrum decision using cognitive radio concept. The simulation results justify that the proposed scheme is better than the conventional scheme.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.12-17
• /
• 2009

We have implement어 a bust mode optical transmitter using digital temperature compensation architecture with a microprocessor. Instead of previous analog real time technique, we used digital sampling and holding technique for the temperature compensation in order to get stable high speed data transmission of the laser diode. This digital temperature compensation technique should be complemented the previous analog method with accuracy and effectiveness in the over Gb/s transmitting application.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.557-559
• /
• 2005

Optical networks are composed of various enabling technologies, merged in harmony to produce high-speed, reliable and affordable communications backbones. Optical communications has evolved out of the necessity for a transmission medium with increased bandwidth capacity. The evolution of fiber optic data communications has stemmed from the telecommunications industry's need to multiplex voice channels for interconnecting call distribution center.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.85-88
• /
• 2008

수중에서는 매질과 채널의 특성으로 인해 가능한 최대 데이터 전송 속도는 지상통신에서의 데이터 전송 속도에 비해 매우 낮으며, 이를 어떻게 극복하느냐가 매우 중요하다. 특히 천해(shallow water)에서 다중경로(Multipath)로 인한 지연 확산은 심볼 사이의 ISI(Inter Symbol Interference)를 유발시켜 수중 통신 시스템의 성능을 더욱 떨어뜨린다. 본 논문에서는 수중 음향 채널에서 고속 데이터 전송을 위해 OFDM(Orthogonal Frequency Division Multiplexing) 방식을 이용한 통신 시스템을 다룬다. 다중경로로 인한 심한 심볼간 간섭을 받는 수중 채널에서 고속 데이터 전송을 위해 OFDM 방식의 통신 시스템의 성능을 평가하였으며, 이를 위해 수중 채널 모델을 이용해 영상 데이타 전송 시뮬레이션을 수행하였다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.571-572
• /
• 2008

We propose a 4-bit 1.6GSample/s flash-A/D converter realized in a digital 0.18um 1-poly 4-metal CMOS technology. To achieve low power with good performance, we employ immanent C2MOS comparator scheme. The kickback noise is one of the most important issue in A/D comparator performance. To decrease the effect of kickback noise, here we introduce kickback neutralization technique. The designed A/D converter has an effective number of bits(ENOBs) of 3.93 while using 32mW operating at 1.6GHz.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.878-881
• /
• 2018

In this paper, experiments through performance evaluation under real operation environment were conducted. Transceiver and microcontroller shows the characteristics for the amount of current consumption and software protocol was optimized by controlling the time of Report Attribute and electric current level. To reduce current consumption when using battery, with designing transmission of the same amount of data as soon as possible, power consumption efficiency was enhanced.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.7
• /
• pp.92-98
• /
• 2012

It is made compulsory to install SPD for the purpose of protecting electric and electronic devices when an abnormal voltage such as lightning occurs to power line using power frequency of 60Hz. Recently, the high speed communication technology utilizing power line is receiving attention again as a communication technology for smart grid. The SPD influences the performances of power line communication when using SPD and power line communication system together. In order to improve the performance of power line communication, a proposed scheme for series connection of gas discharge tube to ZnO varistor was presented. This paper measured the impacts of series connection of GDT to SPD using ZnO varistor on the limit voltage of Class III SPD. This paper also presented the DC operating voltage of GDT which satisfies the limit voltage of power line communication system and SPD simultaneously.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.293-293
• /
• 2000

The SECS(SEMI Equipment Communications Standard) is a standard protocol for communication between equipments and a host in semiconductor processes. This paper proposes the implementation of the HSMS(High-speed SECS Message Services) as an interface for transmission of the SECS messages and SECS-II containing message contents defined as an SEMI standard. The HSMS driver is implemented as a type of the daemon program and several DLL files. The SECS-II composes of the SML(SECS Message Language) file defining the SECS messages, the SML translator being able to interpret and transform the SML, and the data index table being able to refer to SECS messages. We also define the shared parameter to exchange the HSMS header and SECS message between the HSMS and the SECS-II. Eventually, to show the effectiveness of the proposed drivers, we test the SECS communications between equipments and a host using the implemented communication programs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.263-263
• /
• 2000

Electromagnetic Suspension(EMS) System produces no noise, friction and heat through non-contacting operation Therefore, the applicable device using EMS system has a lot of attraction in case of the high-speed and non-contacting transmission EMS with nonlinear properties requires a precise airgap position control and stable kinematics characteristics under the disturbances, In this study, the nonlinear system was linearized by a Nonlinear Feedback Lineariztion(NFL) method. The NFL method requires that the modelling should be exact, and the state variables should be measured and a rapidly operating controller be necessary on account of a heavy data calculating In the experiments. the ideal control characteristics of the NFL was acquired through simulation at first. then the characteristics of the actual system were compared with those of simulation. In addition, the results by NFL were examined and analysed considering the characteristics of the PID control. The Control by NFL shows much stable control characteristics than the PID control. Whereas, the steady state errors occur for various disturbances. hence a robust control design is remained for a further study.