• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.276-282
• /
• 2016

A 2 Gbit/s visible-light communication (VLC) scheme using time-frequency color-clustered (TFCC) multiple-input multiple-output (MIMO) based on blue, cyan, yellow, and red (BCYR) light-emitting diodes (LEDs) is presented. In the proposed scheme, BCYR LEDs are employed to form four different color clusters. Data transmission using the four color clusters is performed in MIMO, so that the scheme achieves a very high speed of data transmission. Moreover, the scheme employs the TFCC strategy to yield high performance in terms of bit error rate (BER). TFCC operates in such a way that the original data and the two delayed versions of the data are multiplied by orthogonal frequencies and then transmitted using a specific color of the BCYR LED. In the receiver, color filters are employed to detect the data transmitted from the desired cluster. Selection combining (SC) is also performed to yield a diversity effect within each color cluster, to further improve the performance. Performance evaluation demonstrates that the proposed TFCC MIMO VLC offers a data rate of 2 Gbit/s and a bit error rate of 4×10^-5, at an E_b/N_o value of merely 3 dB.

• 천문학논총
• /
• 제20권1호
• /
• pp.63-71
• /
• 2005

e-VLBI was invented to enhance the efficiency of VLBI (Very-Long-Baseline Interferometry) system by transmitting the data via high speed network. Korean VLBI Network (KVN) has a plan to construct e-VLBI system named e-KVN. High speed backbone network and efficient network model are essential to implement successful e-VLBI system. This paper introduces a network model based on PC cluster technology. The present status of high speed backbone network in Korea is overviewed. We suggest that the network link via Korea Advanced Research Network (KOREN) is one of feasible way for e-KVN. We also describe the principles of e-VLBI and protocol for network transmission such as VSI-E (VLBI Standard Interface - Electronic), RTP (Real-Time Transport Protocol) and RTCP (Real-Time Transport Control protocol).

• 한국통신학회논문지
• /
• 제28권1A호
• /
• pp.47-53
• /
• 2003

본 논문에서는 155 Mb/s급 멀티플렉서-디멀티플렉서를 단일소자로 설계하였다. 이 소자는 초고속 전송망의 전송노드 역할을 하는 2.5 Gb/s SDH 전송시스템에 적용되어 51 Mb/s의 병렬 데이터들을 155 Mb/s의 직렬 데이터로 다중화 하거나 155 Mb/s 직렬 데이터들을 51 Mb/s의 병렬 데이터로 역 다중화 하는 기능을 수행한다 소자의 저속부는 TTL로 접속되고 고속부는 100K ECL로 접속되며 0.7${\mu}m$BiCMOS gate array로 제작되었다 설계 제작된 소자는 180˚의 155 Mb/s 데이터 입력 phase margin을 가지며 출력 데이터 skew는 470ps, 소비전력은 2.0W 이하의 특성을 보인다.

• 한국통신학회논문지
• /
• 제41권10호
• /
• pp.1309-1316
• /
• 2016

본 논문에서는 저용량 데이터의 전송빈도가 높은 스마트폰의 데이터 통신 성향을 참조하여, 스마트폰의 특성에 알맞은 알고리즘을 제시한다. 스마트폰의 사용량은 최근 비약적으로 늘어났으며, 실시간 지도검색, 대중교통 정보 확인, 게임, SNS 등의 사용 빈도가 높아지게 되었다. 이러한 스마트폰에서 주로 일어나는 저용량 데이터 통신은 TCP의 혼잡회피 단계가 나오기 이전에 데이터 전송이 끝나는 경우가 대부분이므로, 본 논문에서는 혼잡회피가 아닌 다른 TCP 관련 알고리즘을 조정하여 초기 통신 속도의 향상을 구현하였다. 본 논문에서 제시하는 알고리즘은 리눅스의 Quick ACK과 네이글 알고리즘(Nagle's algorithm)의 조절을 통하여 불필요한 지연을 줄이고, 짧은 통신에서도 안정적으로 높은 전송속도를 유지할 수 있도록 TCP를 개선하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.241-249
• /
• 2015

Phase-locked-loops (PLL) have been employed in high-speed data transmission systems like wireless transceivers, disk read/write channels and high-speed interfaces. The majority of the researchers use a charge pump (CP) to obtain high performance from PLLs. This paper presents a review of various CMOS CP schemes that have been implemented for PLLs and the relationship between the CP parameters with PLL performance. The CP architecture is evaluated by its current matching, charge sharing, voltage output range, linearity and power consumption characteristics. This review shows that the CP has significant impact on the quality performance of CP PLLs.

• 한국통신학회논문지
• /
• 제34권8C호
• /
• pp.801-805
• /
• 2009

컴퓨터 네트워크의 지속적인 보급과 멀티미디어에 대한 수요의 급증은 화상 회의 등의 새로운 수요에 대응 할 수 있는 초고속 근거리 통신망의 중요성을 부각시키고 있다. 이러한 초고속 근거리 통신망의 구현을 위해서는 연결된 컴퓨터들 간의 데이터 전송이 지연 없이 실시간으로 수행될 수 있도록 동기화시키는 것이 매우 중요하다. 네트워크상의 모든 컴퓨터들이 거의 같은 주기의 클럭을 사용할 경우, 데이터 정체를 최대한 줄일 수 있는 장점이 있는 반면, 송신단으로부터의 데이터를 수신단에서 받아들일 때 비동기 데이터 샘플링에 의한 준안정성 문제가 발생할 수 있기 때문에 그에 대한 해결을 위한 신축 버퍼가 필요하며, 본 논문에서는 고속 동작용 신축버퍼의 구현에 대해 논의한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.139-140
• /
• 2010

This paper presents an indoor prototype for wireless digital signal transmission using Visible Light Communications (VLC) in which high power Light Emitting Diode (LED) is used. Using low cost and off-the-shelf components, the transmitter module is constructed using an AVR Atmega128 microcontroller and commercial white beam LEDs. Modulating the light intensity of the LED enables digital signals to be transmitted across the optical link. The receiver module employs a high speed PIN photodetector for optical signal detection and a recovery circuit for optical-electro signal conversion. By sending digitalized data via VLC technology, many applications can be realized in the areas of consumer advertising, traffic safety information and disaster control.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.685-688
• /
• 2008

Mini-LVDS has been widely used for high speed data transmission because it provides low EMI and high bandwidth for display driver. In this paper, a Mini-LVDS output buffer with LTPS TFT process is presented which provides sufficient performance in the presence of large variation in the threshold voltage and mobility and kink effect.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.287-290
• /
• 1999

In the transmitter of optical fiber transmission systems, a time-division multiplexer combines several parallel data streams into a single data stream with a high bit rate. In this paper, we design a 2:1 (2-channels) time-division multiplexer using SiGe HBT with emitter size of 2$\times$8${\mu}{\textrm}{m}$$^2$. The operation speed is 10Gbps, the rise and fall times of 20-80% are 34ps and 35ps, respectively and the dissipation of power is 0.86W.

• 한국경영과학회지
• /
• 제31권3호
• /
• pp.145-154
• /
• 2006

WiBro (Wireless Broadband Internet) system is going to be 9ot down to commercialization. The high portable internet system is able to be connected to the high-speed internet using 2.3 GHz frequency bandwidth, anytime and anywhere. An effective scheduling for UGS, rtPS, nrtPS and BE requiring different QoS, which are service types of the WiBro, is necessary to increase the efficiency of radio channels that are the limiting resource. This paper researches an uplink scheduling that plays a role in assignment for the radio channels from subscribers to base stations. The suggested scheduling provides priorities with each service type considering QoS of them but reserves some bandwidth for lower priory services. After deciding effective amount of bandwidth for reservation, we suggest analytical result on mean delayed time of packet transmission for each terminal, transmission rate for the data, and capacity for uplink. This research can be used as basic data for the standard in the high portable internet system and as data to predict the capacity of base stations.