• Clinics in Orthopedic Surgery
• /
• 제10권4호
• /
• pp.508-512
• /
• 2018

Foraminal decompression using a minimally invasive technique to preserve facet joint stability and function without fusion reportedly improves the radicular symptoms in approximately 80% of patients and is considered one of the good surgical treatment choices for lumbar foraminal or extraforaminal stenosis. However, proper decompression was not possible because of the inability to access the foramen at the L5-S1 level due to prominence of the iliac crest. To overcome this challenge, endoscopy-based minimally invasive spine surgery has recently gained attention. Here, we report the technical skills required in unilateral extraforaminal biportal endoscopic spinal surgery using a $30^{\circ}$ arthroscope to enable foraminal decompression at the L5-S1 level. Two 0.8-cm portals were created 2 cm lateral from the lateral border of the pedicles at the L5-S1 level. After sufficient working space was made, half of the superior articular process (SAP) in the hypertrophied facet joint was removed using a high-speed burr and a 5-mm wide osteotome, whereas the remaining inside part of the SAP was removed using a Kerrison punch and pituitary punch. The foraminal ligamentum flavum should be removed to inspect the conditions of the L5 exiting root and disc. Removing of the extruded disc could decompress the L5 root. The extraforaminal approach using a $30^{\circ}$ arthroscope is considered a minimally invasive alternative technique for decompressing foraminal stenosis at the L5-S1 level that preserves facet stability and provides symptomatic relief.

• 한국기계가공학회지
• /
• 제21권6호
• /
• pp.74-80
• /
• 2022

The surface status of a workpiece determines its functionality, product quality, and manufacturing costs. Thus, several finishing technologies have been widely investigated and applied to improve surface characteristics. In this study, rotational electro-magnetic abrasive finishing (REMAF) was suggested as a non-contact finishing process to achieve high geometric precision. To verify the effects of the REMAF process on burr removal on the surface of Al6061, experiments were conducted using the Taguchi method. Based on the experimental results analyzed by the S/N ratio and ANOVA, the optimal conditions were defined as A₃B₂C₃D₃ that corresponded to 1,800 rpm of rotational speed, 1.5 kg of abrasive particle weight, 0.7 mm of abrasive diameter, and 15 min of working time. In addition, the particle weight was a key attribute for deburring, whereas the working time was less effective.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권3호
• /
• pp.35-42
• /
• 2004

This research describes that the cutting characteristics and tool wear behavior in the micro cutting of three kinds of wear resistant cemented carbides (WC-Co; V40, V50 and V60) using PCD (Poly Crystalline Diamond) and PCBN (Poly crystalline Cubic Boron Nitride) cutting tools by use of the SEM (Scanning Electron Microscope) direct observation method. The purpose of this research is to present reasonable cutting conditions from the viewpoint of high efficient cutting refer to a precise finished surface and tool wear. Summary of the results is as follows: (1) The cutting forces tend to increase as the increase of the weight percentage of WC particles, and the thrust forces was larger than the principal forces in the cutting of WC-Co. These phenomena were different from the ordinary cutting such as cutting of steel or cast iron. (2) The cutting speed hardly influenced the thrust force, because of the frictional force between the cutting tool edge and small WC particles at low cutting speed region such as 2$\mu\textrm{m}$/s. It seemed that the thrust cutting force occurred by the contact between the flank face and work material near the cutting edge. (3) The wear mechanism for PCD tools is abrasion by hard WC particles of the work materials, which leads diamond grain to be detached from the bond. (4) From the SEM direct observation in cutting the WC-Co, it seems that WC particles are broken and come into contact with the tool edge directly. This causes tool wear, resulting in severe tool damage. (5) In the orthogonal micro cutting of WC-Co, the tool wear in the flank face was formed bigger than that in the rake face on orthogonal micro cutting. And the machining surface integrity on the side of the cutting tool with a negative rake angle was better than that with a positive one, as well as burr in the case of using the cutting tool with a negative rake angle was formed very little compared to the that with a positive one.

• Journal of Korean Neurosurgical Society
• /
• 제60권5호
• /
• pp.485-497
• /
• 2017

Surgical treatment of the degenerative disc disease has evolved from traditional open spine surgery to minimally invasive spine surgery including endoscopic spine surgery. Constant improvement in the imaging modality especially with introduction of the magnetic resonance imaging, it is possible to identify culprit degenerated disc segment and again with the discography it is possible to diagnose the pain generator and pathological degenerated disc very precisely and its treatment with minimally invasive approach. With improvements in the optics, high resolution camera, light source, high speed burr, irrigation pump etc, minimally invasive spine surgeries can be performed with various endoscopic techniques for lumbar, cervical and thoracic regions. Advantages of endoscopic spine surgeries are less tissue dissection and muscle trauma, reduced blood loss, less damage to the epidural blood supply and consequent epidural fibrosis and scarring, reduced hospital stay, early functional recovery and improvement in the quality of life & better cosmesis. With precise indication, proper diagnosis and good training, the endoscopic spine surgery can give equally good result as open spine surgery. Initially, endoscopic technique was restricted to the lumbar region but now it also can be used for cervical and thoracic disc herniations. Previously endoscopy was used for disc herniations which were contained without migration but now days it is used for highly up and down migrated disc herniations as well. Use of endoscopic technique in lumbar region was restricted to disc herniations but gradually it is also used for spinal canal stenosis and endoscopic assisted fusion surgeries. Endoscopic spine surgery can play important role in the treatment of adolescent disc herniations especially for the persons who engage in the competitive sports and the athletes where less tissue trauma, cosmesis and early functional recovery is desirable. From simple chemonucleolysis to current day endoscopic procedures the history of minimally invasive spine surgery is interesting. Appropriate indications, clear imaging prior to surgery and preplanning are keys to successful outcome. In this article basic procedures of percutaneous endoscopic lumbar discectomy through transforaminal and interlaminar routes, percutaneous endoscopic cervical discectomy, percutaneous endoscopic posterior cervical foraminotomy and percutaneous endoscopic thoracic discectomy are discussed.

• 대한골관절종양학회지
• /
• 제1권2호
• /
• pp.145-153
• /
• 1995

Giant cell tumor is most frequently found in juxtaarticular region, and difficult to treat because of local recurrence. Although primary resections reduce recurrence, the joint function will be markedly impaired. Techniques involving physical adjuncts(high speed burr and electric cauterization), acrylic cement or en bloc resection with VFG(vascularized fibular graft) have been employed to reduce local recurrence. From October 1984 to April 1994, twenty-nine patients diagnosed as giant cell tumor were treated at department of Orthopaedic Surgery, School of Medicine, Kyung Hee University. There were eleven men and 18 women, ranging in age from 17 to 52 years(mean: 34 years). The average follow-up period was four years and five months. The location of the lesion was around the knee in 15, distal radius in three, femoral head in three, and others in eight patients. Fifteen patients around the knee joint were treated with several modalities; curettage with bone graft in five, curettage with cement filling in three, curettage with bone graft and physical adjuncts in five, en bloc resection with VFG in one and en bloc resection with arthroplasty in one patient. The functional results, according to the Marshall's knee score, were excellent in one, good in two, and fair in two after the curettage with bone graft, good in three after the curettage with bone cement filling, excellent in one, good in four after the curettage with bone graft and physical adjuncts, and good in two after the en bloc resection with VFG or arthroplasty. Three patients had local recurrence among 15 patients with giant cell tumor around knee. Vascularized fibular graft around wrist joint provided good functional restoration without local recurrence in all three patients who had giant cell tumor in distal radius. Although there is no statistical significance, it seems that curettage with bone graft using physical adjuncts or acrylic cement reveals better results than simple curettage with bone graft. Excellent functional result were obtained without local recurrence by using vascularized fibular graft after en bloc resection.

• 대한골관절종양학회지
• /
• 제9권1호
• /
• pp.124-129
• /
• 2003

목적: 슬관절부에 발생한 제 3 기 거대세포종에 대해 수술적 치료 후 임상적, 방사선학적 결과를 알아보고자 후향적 분석을 시행하였다. 대상 및 방법: 1991년 3월부터 2000년 2월까지 슬관절부에 발생한 제 3기의 거대세포종으로 수술적 치료를 받은 21명의 환자를 대상으로 하였으며 추시기간은 최단 1년 최장 9년으로 평균 5.7년이었다. 수술방법으로11명에서 병소내 소파술 및 액화 질소 냉동 요법 후 시멘트 충진술을 시행하였고, 7명에서 병소내 소파술 시행 후 냉동 요법 없이 시멘트 충진술 또는 자가골 이식술을 시행하였다. 관절면의 파괴가 심했던 3명에서는 광범위 절제술 후 재건술을 시행하였다. 결과: 첫 수술 후 기능적 평가는 우수 및 양호가 13례, 보통이 4례, 실패가 4례였다. 국소 재발이나 감염으로 인해 실패로 판정되어 재수술을 시행한 4례에서 최종 추시시 기능적 결과는 우수 3례, 보통이 1례로, 전체적으로는 우수 및 양호가 16례, 보통이 5례였다. 소파술, 냉동요법 및 시멘트 충진술을 시행한 11명의 환자 중에는 1명(9.1%)에서 재발하였으며, 1명(9.1%)에서 슬관절의 퇴행성 변화를 보였으며, 냉동요법 없이 소파술 및 시멘트 충진술 또는 골이식을 받은 환자 7명중 2명(28.6%)에서 재발하였고, 1명에서(14.5%) 슬관절의 퇴행성 변화를 보였다. 결론: 철저한 소파술 및 냉동 보조요법은 슬관절부의 제 3기 거대 세포종 치료에 있어 유용한 방법이며, 광범위 절제술 및 재건술은 병변이 거대하고 관절면이 상당히 파괴되었거나, 수술 후 국소 재발로 인해 골파괴 및 관절 침범이 심한 경우에 시행하는 것이 바람직 할 것으로 사료된다.