• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1180-1186
• /
• 2008

The LNB phase noise of user terminal for high data rate satellite transmission was analyzed in this paper. The phase noise severely affects the service performance in low data rate transmission as well as multi-mode signal for high data rate. As the satellite link frequency is increased, the effects of phase noise for multi-mode signal is increased. The phase noise of LNB, which is operated in high frequency band, is about equal to the transmission system phase noise and have an major effects on service performance degradation. The available transmission mode was analyzed in presence of phase noise of LNB and analysis method for LNB phase noise spectrum distribution was proposed in multi-mode signal.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.231-240
• /
• 2015

To facilitate the base station planning in high speed railway communication systems, it is necessary to consider the functional relationships between the base station transmit power and space parameters such as train velocity and cell radius. Since these functions are able to present some inherent system properties determined by its spatial topology, they will be referred to as the power-space functions in this paper. In light of the fact that the line-of-sight path persists the most power of the received signal of each passing train, this paper considers the average transmission rate and bounds on power-space functions based on the additive white Gaussian noise channel (AWGN) model. As shown by Monte Carlo simulations, using AWGN channel instead of Rician channel introduces very small approximation errors, but a tractable mathematical framework and insightful results. Particularly, lower bounds and upper bounds on the average transmission rate, as well as transmit power as functions of train velocity and cell radius are presented in this paper. It is also proved that to maintain a fixed amount of service or a fixed average transmission rate, the transmit power of a base station needs to be increased exponentially, if the train velocity or cell radius is increased, respectively.

• Journal of Digital Contents Society
• /
• v.13 no.1
• /
• pp.111-118
• /
• 2012

The burst is to require abruptly high transmission rate in case of transmitting pre-stored variable bit rate video data, and it causes to be inefficient use of network resource, resource reservation. To avoid these problems, smoothing is transmission plan where variable rate video data is converted to a constant bit rate stream. These smoothing algorithms include CBA, MCBA, MVBA and others. To evaluate amount of burst reduction in the existing CBA, MCBA, MVBA algorithm, this paper compares the burst-related-factors of transmission plan in smoothing algorithms with original video sources which were stored Variable Bit Rate. There are maximum frame bytes, maximum GOP bytes, transmission rate variability per frame, transmission rate variability per GOP in burst-related evaluation factors. Experimental result shows burst-related factors of smoothing algorithms which were used for experiment lower than that of pre-stored video data, except special case.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.637-644
• /
• 2004

This paper proposed and implemented the adaptive transmission middleware for video streaming, which is able to support the adaptive transmission of video data to the fluctuating changes of network environment in the packet-based network and the properties of transmitted video data. The adaptive transmission middleware is made up SR-RTP-based transfer module and TFRC(TCP Friendly Rate Control)-based transfer-rate control module. The SR-RTP-based transfer module supports RTP-based real-time transfer of video data and packet retransmission scheme retransmitting the high-priority packets selectively in the damaged video data to reduce the error induced by the packet loss. Sharing the transmission bandwidth of network with the TCP-based data transfer, the TFRC-based transfer-rate control module controls the transfer rate of video data according to the most allowable transmission bandwidth in the network, so that the transfer rate is controlled adaptively to the fluctuating changes of transmission bandwidth. This paper, for the experiment, applied the adaptive transmission middleware to video streaming in the external Internet environment, and analyzed the effective frame transfer rate and the degree of the streaming jitter to evaluate the performance of packet-loss recovery and adaptive transfer rate control. In the external Internet environment where the packet-loss rate is high a bit, the relatively high streaming performance was showed compared with the case that didn't apply the adaptive transmission middleware.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.25-31
• /
• 2004

fireless LAN can offer high data rate communication between wireless terminals. In IEEE 802.11 wireless LAN, a basic service unit is called a Basic Service Set (BSS), which consists of one AP and more than one wireless terminals. Terminals far from the AP may not communicate with high data rate because signal strength is weakened as they move away from the AP. In this paper we propose a method to permit high speed data transmission by grouping terminals and by using part of wireless terminals as repeaters. We analyze the proposed and algorithm via simulations. Our proposed grouping mechanism is shown to be an effective way to increase the distance for high rate transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.293-302
• /
• 2004

Wireless LAN is a rather mature communication technology that connects mobile terminals. A typical wireless LAN system is composed of one AP and more than one terminals, which is called a BSS. Terminals near to an AP can receive high rate data but terminals far from an AP may not receive data with guaranteed high speed rate because received signal strength is weakened. This paper proposes a method to allow high speed data transmission by grouping terminals and using part of wireless terminals as repeaters. We compare and analyze proposed grouping algorithms based on Depth First Search and Breadth First Search via simulations. A grouping algorithm based on Breadth First Search is shown to be more effective in term of efficiency and coverage.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.996-1000
• /
• 2010

In order to apply VLC (visible light communication) in harsh environment of nuclear power plant in-containment building, the high luminance LEDs, which are key components of the VLC system, have been gamma irradiated at the dose rate of 4 kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced coloration effect in the high luminance LED bulb made of acryl or plastic material was observed. In the VLC wireless data transmission experiment using the high luminance LEDs irradiated by high dose rate gamma-ray, the radiation induced coloration effect of the high luminance LED bulb extended the communication distance compared to non-irradiated LEDs.

• Journal of electromagnetic engineering and science
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2007

Recently, Mc(Multi-code) modulation/demodulation(modem) technique has been explored for high speed data transmission in wireless environment. The conventional Mc modem generates some side effects such as allocating Walsh codes, which motivates to propose a novel Mc modem method with sub-code. Our proposed system should expanded the size of sub-code to provide high-rate data transmission, which also affect adversely to the performance of the system with high PAPR(Peak to Average Power Ratio). Thus, in this paper, we propose a novel pre-coded Multi-Dimensional HCOC(High Capacity Orthogonal Code) Mc modem technique to reduce the high PAPR, which enables the performance improvement. This proposed system can be easily designed by concatenating HCOC Mc modem with the generic Mc modem. The pre-coding technique that is used in this paper is CAC(Constant Amplitude Coding), that helps the system maintain the constant transmission power and reduce the maximum transmission power.

• Journal of Preventive Medicine and Public Health
• /
• v.42 no.6
• /
• pp.408-415
• /
• 2009

Objectives : This study was performed to investigate the mumps transmission control status and inapparent infection rate among middle and high school students in Daegu City during a mumps outbreak. Methods : Nine schools (two middle schools and seven high schools), which reported a number of mumps cases between 2007 and 2008 were selected for investigation. During March-May 2008, a standard questionnaire was distributed to gather information about case identification, instructed isolation measure, isolation status of mumps cases and related factors, and outdoor activities of nonisolated mumps case. Inapparent infection rate was estimated by serum mumps IgM and IgG antibodies status and self-reported mumps symptoms in three of the nine schools. Results : Among 2,560 respondents, more than half of students answered that they did not receive instructions in mumps transmission control measures during the outbreak. Among the 327 mumps cases identified by the questionnaire, 131 cases (40.1%) were considered as isolated and the isolation rates were significantly different among schools, grades, and gender. Of the non-isolated cases, 88.3% continued attending school. Inapparent mumps infection rates were between 56.3% and 70.2%. Conclusions : Mumps transmission control was inadequate to control the mumps outbreak. Although high inapparent infection rate would mitigate the transmission control effect of case isolation, this measure is fundamental for infection control. The reasons of this inadequate status need to be explored to develop an effective intervention strategy.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.525-530
• /
• 2008

There are a few core technologies to enable high-performance $4^{th}$ generation (4G) broadband wireless communication system. A multiple input multiple output (MIMO) provides high-rate transmission through expended channels by multiple array antennas in both sender and receiver side. Also orthogonal frequency division multiplexing (OFDM) is well-known as the most appropriate technique for high data rate transmission such as Mobile WiMAX and WLAN. Efficient decrease of inter-carrier interference (ISI) and inter-carrier interference (ICI) are the reasons for why OFDM is suitable for high-performance transmission, 4G mobile communication. In this paper, we mainly focus on two of objects, combination between MIMO and OFDM, and OFDM channel simulator using Ray-tracing algorithm. The results of this paper can be used implementation of a Wireless Software Platform for 4G Mobile Communication Systems.