• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.731-732
• /
• 2006

Recently warm compaction techniques are focused on and commercialization of one high-density compaction process in the P/M industry. Another development is a new SEGLESS using a developed lubricant that reduces ejection force at room temperature compaction. It is possible to achieve high-density by reducing lubricant amount. In this paper we confirmed that green density was $7.35g/cm^3$ at 686MPa of compaction pressure when the new SEGLESS was applied to relatively lower temperature warm compaction process, such as $80^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.3
• /
• pp.1-7
• /
• 2004

The application of abrasive-assisted high energy water-jet was investigated as a possible new method of cutting wood. In this study the maximum cutting speeds for species of various wood density were determined and water-jet machining characteristics were investigated for sixteen Korean domestic species. The maximum cutting speed ranged from 200 to 750 mm/min. The results indicate that wood density affects machining characteristics such as maximum cutting speed, surface roughness, and kerf width. Roughness of surface generated increased and kerf width decreased as penetration depth increased.

• The Korean Journal of Ecology
• /
• v.9 no.1
• /
• pp.73-78
• /
• 1986

The effects of density and soil nutrient regime on competition between individuals in pure and mixed populations of two annuals. Chenopodium album and Digitaria sanguinalis were investigated at the level of enegy allocation. Seedling emergence of two species was extremely high (>90%) in both pure and mixed culture irrespective of the density and nutrient regime, but percentage of seedling establishment or fertile plant became gradually low with increasing density owing to 'self-thinning'. The mean plant dry weight was significantly reduced with increasing density and decreasing soil fertility. The dry matter production of D. sanguinalis in mixture was markedly greater than in pure culture under medium and high density. Also, as considered the number of seed production as reproductive allocation, relationship between them and the number of seed production per plant showed a similar tendency. Therefore, these results indicated that D. sanguinalis had a greater competitive advantage than C. album and energy allocations to variious organs were regulated by plastic response rather than determined genetically.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.534-538
• /
• 2001

Energy storage devices with high energy density as well as high power density are expected to be developed from the point of view of compensation of fluctuating load and generated power by distributed generations such as wind turbines, photovoltaic cells and so on. SMES (Superconducting Magnetic Energy Storage) has higher power density than other energy storage methods, and secondary batteries have higher energy density than SMES. The hybrid energy storage device using SMES and secondary batteries is proposed as the energy storage method with higher power and energy density, the sharing method of power reference value for each storage device, simulation and experimental results are presented.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.2
• /
• pp.18-24
• /
• 1989

Computer-aided high frequency ultrasonic is applied to aluminum oxide(85w%, 94w%, 96w%, and 99w%) MOR(modulus of rupture) samples to evaluate mechanical properties such as density variation, pore content, elastic modulus, shear modulus, and poisson's ratio. Ultrasonic wave velocity and attenuation measurement techniques were used as an evaluator of such properties. Pulse-echo C-Scan images with different fate setting method using 50MHz center frequency 1 inch focal length transducer allows evaluation of density variation and pore content. Elastic modulus calculated with the relation of density and ultrasonic velocity. It shows good reliability as compared with resonance method. Sintered density variation of $0.025g/cm^{3}$, that is 0.6% of theoretical density in $Al_{2}O_{3}$ samples can be observed by ultrasonic velocity measurement. Attenuation measurement method qualitatively agree with 4-point fracture testing result concerning of porosity content.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.3
• /
• pp.189-193
• /
• 2001

Critical cell density (CCD), the maximum cell concentration without mutual shading in algal cultures, can be used as a new operating parameter for high-density algal cultures and for the application of the flashing light effect on illuminated algal cultures. CCD is a function of average cell volume and light illumination area. The CCD is thus proposed as an index of estimation of mutual shading in algal cultures. Where cell densities are below the CCD, all the cells in photobioreactors can undergo photosysnthesis at their maximum rate. At cell densities over CCD, mutual shading will occur and some cells in the illumination chamber cannot grow photoautotrophically. When the cell concentration is higher than the CCD, specific oxygen production rates under flashing light were higher than those under continuous light. The CCD was found to be a useful engineering parameter for the application of flashing light, particularly in high-density algal cultures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.202-202
• /
• 2011

Diagnostics of plasma density is a key factor for monitoring plasma processing. Various probes are invented to measure plasma density and cut-off probe is a one of the most promising diagnostics tool for measuring plasma density. However, at the low density or high pressure the cut-off probe cannot clearly resolve the cut-off peak. Several reasons make this problem: Cut-off likes peaks caused by cavity resonances and weaken transmission spectrum signal at high pressure. Recently, You et al., have researched mechanism of cut-off probe and we improve the cut-off reliability and sensitivity base on that research. Modified cut-off antenna is adapted and bias cut-off probe method is tried. These experiment results have good agreement with the previous study and show good measurement characteristics.

• Clinical and Experimental Reproductive Medicine
• /
• v.29 no.4
• /
• pp.279-285
• /
• 2002

Objective : To evaluate the difference between estrogen only therapy and estrogen-androgen combination therapy in surgical menopause patients. Materials and Method: Surgical menopause patients received 0.625 mg conjugated equine estrogens or 0.625 mg conjugated equine estrogens plus 1.25 mg methyltestosterone for 2 years. Bone mineral density, menopausal symptoms, lipoprotein profiles were measured. Results: Both groups showed increased bone mineral density. In the combination group, total cholestero l, high density lipoprotein cholesterol and triglycerides decreased. In the estrogen only group, low density lipoprotein cholesterol decreased but high density lipoprotein cholesterol increased significantly. In both groups, menopausal symptoms were much improved. Side effects were easily tolerated in both groups. Conclusions: Estrogen-androgen combination therapy had comparable benefits compared with estrogen only therapy.

• Journal of radiological science and technology
• /
• v.3 no.1
• /
• pp.43-48
• /
• 1980

An experimental study was carried out to make a comparison between tube voltage and density of barium sulphate in the stomach radiography. The results were summarized as follows: 1. The percentage of density on concentrations of barium sulphate as contrast media could not show in differences with changes of voltages applied X-ray tube. 2. The changes of density visualized on X-ray film mainly depend upon with thickness of stomach filled barium sulphate than the ratio of barium sulphite and plain water volume. 3. The lesions positioned in upper part within stomach exhibited their best discrimination performanance with depth in the low tube voltage, followed in order by the middle part and lower part. However, the discrimination performanance at the high tension radiography uniformly visualized over X-ray film without density in change.

• International Journal of High-Rise Buildings
• /
• v.13 no.1
• /
• pp.57-67
• /
• 2024

With the requirement of high quality and three-dimensional urban development, the public space areas city-center rail transit stations is expanded from the plots defined by the road network density to the plots defined by the three-dimensional public space density, covering the internal and external paths of the plots, which brings about the resilient pattern of plot utilization. This paper uses the isochronous three-dimensional influence realm model around the station areas to quantitatively analyze and compare the surrounding three-dimensional path density of public space, and initially proposes flexible use patterns of differently scaled plots under the multi-scale plots linkage, to effectively promote the overall accessibility of the station realm space.