• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.522-531
• /
• 2003

Samples with the nominal composition, B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{\delta}}$ high- $T_{c}$ superconductors containing MgO as an additive were fabricated by a solid-state reaction method. Samples with MgO of 5~30 wt% each were sintered at 820~86$0^{\circ}C$ for 24 hours. The structural characteristics, critical temperature, grain size and image of mapping with respect to MgO contents were analyzed by XRD(X-Ray Diffraction), SEM(Scanning Electron Microscope) and EDS(Energy dispersive X-ray spectrometer) respectively. As MgO contents increased, intensity of MgO Peaks and ratio of Bi-2212 phase in superconductors intensified and the proportion of the phase transition from Bi-2223 to Bi-2212 was increased.

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.44-47
• /
• 1994

High $T_{c}$ superconducting $Y_{1}Ba_{2}Cu_{3}O_{7-\delta}$ thin film was grown up for c-axis orientation by epitaxial growth method on $LaAlO_{3}$ single crystal substrate. The crystal structures of this thin film were found to be c-axis orientation by X-ray diffraction patterns. Hall effect and resistivity measurements were made by van der Pauw method. Hall resistivity was calculated from the magnetoresistivity by considering thermomagnetic effect. The relation was $pH=p_{s}tan{\alpha}_{n}-QBT\frac{S_s}{K_s}$ The measured Hall resistivity and the calculated one are in good agreement each other.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.3
• /
• pp.7-11
• /
• 2010

For many large-scale applications of high-temperature superconducting materials, large critical current density($J_c$) in high applied magnetic fields are required. A number of methods have been reported to introduce artificial pinning centers(APCs) in $YBa_2Cu_3O_{7-\delta}$(YBCO) films for enhancement of their $J_c$. In this work, we investigated electric characteristic of YBCO films on $SrTiO_3$ (100) substrates whose surfaces were modified by the introduction of Au nanoparticles (AuNPs). Au nanoparticles were uniformly dispersed on STO substrates with one of typical solution techniques, self assembled monolayer. After heating the STO substrates with Au nanoparticles, the size of Au nanoparticles was around 29~32 nm in height and 41~49 nm in diameter. XRD diffraction patterns taken on the YBCO film with Au nanoparticles show the c-axis orientation. The measured $T_c$ of YBCO /AuNPs films was around 89K and the $J_c$ was 0.75 MA/$cm^2$ at 65 K and 1 T.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.756-762
• /
• 2011

This study was conducted to investigate the effects of moisture content on microbiological stability and texture characteristic of dry-cured ham. The moisture content of dry-cured hams was adjusted to 35% (C) or 45% (T) and then vacuumpackaged after slicing to a 1 inch thickness. All packaged dry-cured hams were stored at $10^{\circ}C$ for 3 mon, and physicochemical analyses and a sensory evaluation were conducted to verify the quality of dry-cured hams during four different storage periods. Moisture content was significantly higher in T (44.89%) compared to that in C (35.03%). However, crude fat content was higher in C (14.08%) than that in T (11.11%). The pH, salinity, and shear force were higher in C than those in T, and dry-cured hams derived from C seemed to provide low lipid oxidation stability during storage. In contrast, T showed high CIE $L^*$, CIE $a^*$ and CIE $b^*$, and aw values when compared to dry-cured hams from C. Total plate counts and Lactobacillus tended to increase with the increase in storage period, and both were lower in T than those in C after 1 mon of storage. Our results indicate that 45% moisture content improved dry-cured ham quality as compared to that of dry-cured hams containing 35% moisture.

• Food Science of Animal Resources
• /
• v.25 no.2
• /
• pp.203-209
• /
• 2005

Real time-polymerase chain reaction (RT-PCR) is currently considered as the most sensitive method to detect low abundant DNAs in samples. Compared to conventional PCR, real-time PCR has a high reliability because of excluding false-positive results and can allow a simultaneous faster detection and quantification of target DNAs. This study was carried out to identify the Hanwoo (Korean native cattle) beef by genotyping after DNA extraction of commercial beef in 41 restaurants. Since Hanwoo, Holstein and imported cattle meat have different patterns in the MC1R gene associated with the coat colors of cattles (C-type, C/T-type or T-type), we could identify the genotype using real-time PCR The result of real-time PCR assay for beef samples in 41 restaurants which are asserted to sell Hanwoo beef only, showed that 29 of 41 samples were Hanwoo beef gene type (T-type) and 12 of 41 samples were Holstein or imported cattle gene type (C-type or C/T-type). Therefore, the proportion of Han-woo beef was $70.7\%$ and the proportion of Holstein or imported cattle meat was $29.3\%(C/T-type; 12.2\%,\;C-type; 17.1\%)$.

• Horticultural Science & Technology
• /
• v.18 no.2
• /
• pp.98-102
• /
• 2000

This experiment was conducted to determine the effect of chemicals and their concentrations, priming temperature and duration, and different germination temperature on germinability of salvia seeds. The highest percentage of germination was obtained with 50 or 100 mM $KH_2PO_4$, or with -0.50 or -0.75 MPa PEG 8000. When number of days to attain 50% of the final germination percentage (T50) and mean number of days to germination (MDG) were taken into account, 50 mM $KH_2PO_4$ or -0.50 MPa PEG was most effective for early germination. No seeds germinated when primed in $K_3PO_4$ or NaOH solution. Priming the seeds at $20^{\circ}C$ was better than priming at $15^{\circ}C$ or $25^{\circ}C$. Priming at $20^{\circ}C$ for 4 or 6 days reduced the MDG by 2.3 days compared with nonprimed seeds. Seeds primed with -0.50 MPa PEG at $20^{\circ}C$ showed a high germination percentage with reduced T50 and MDG. When seeds were primed in a mixture of -0.50 MPa PEG and 50 mM $KH_2PO_4$ solution and germinated at $30^{\circ}C$ or $35^{\circ}C$, percent germination was lower than nonprimed seeds. However, the combined treatment retained the priming effect for reducing T50 and MDG.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.55-60
• /
• 2003

We designed and constructed integrated 3-channel flux-locked-loop (FLL) electronic system for the control and readout of high-T$_{c}$ SQUIDs. This system consists of low noise preamplifiers, integrators, interface circuits, and software. FLL operation was carried out with biased signals of 19 KHz modulated current and 150 KHz modulated flux, which are reconstructed as detected signals by preamplifier and demodulator. Computer controlled interface circuits regulate FLL circuit and adjust SQUID parameters to the optimum operating condition. The software regulates interface circuits to make an auto-tuning for the control of SQUIDs, and displays readout data from FLL circuit. 3-channel SQUID electronic system was assembled with 3 FLL-interface circuit boards and a power supply board in the aluminum case of 56 mm ${\times}$ 53 mm${\times}$ 150 mm. Overall noise of the system was around 150 fT/(equation omitted)Hz when measured in the shielded room, 200 fT/(equation omitted)Hz in a weakly shielded room, respectively.y.

• Journal of Adhesion and Interface
• /
• v.17 no.4
• /
• pp.136-140
• /
• 2016

In this study, a series of dimer acid-based polyamides with different diamines were synthesized by condensation polymerization and the polyamides were characterized by Fourier transform infrared spectroscopy (FT-IR). Effects of diamine structures on mechanical and thermal properties of polyamides were investigated. The tensile strength and lap shear adhesion strength of aromatic-based polyamide (DAP) were higher than those of aliphatic-based polyamide (DAH). In DSC thermogram, DAP has a high $T_g$ and $T_m$ compared with DAH. DAP's and DAH's softening point were $112-115^{\circ}C$ and $98-121^{\circ}C$, respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.4
• /
• pp.743-750
• /
• 1997

Gingivitis is the most prevalent type of periodontal disease and the dental plaque is considered as a major contributory factor. As the poor oral hygiene is firmly related to the occurrence of periodontal disease, pediatric dentist should make every effort to promote the oral health and control the plaque effectively for the high risk patients, especially for those who are under orthodontic treatment. P.M.T.C.(Professional Mechanical Tooth Cleaning), introduced by Dr. P. Axelsson in 1969, is a very effective method of plaque removal and can be performed by specially trained personnel. Two pediatric orthodontic patients were treated by P.M.T.C. for the elimination of gingivitis and gingival swelling. Signi ficant improvements of gingival condition were achieved in both cases but additional preventive programs and home care along with professional office care seem to be necessary for the best result.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.289-290
• /
• 2006

[ $SrTiO_3$ ] is usually added as shifters in order to move the $T_C$ of $BaTiO_3$ to lower temperatures because it is well established that the $T_C$ of $BaTiO_3$ decreases linearly with a solid solution of $Sr^{+2}$ in place of $Ba^{+2}$. It is not fully understood yet, however, how $SrTiO_3$ influences on the peak value of the dielectric constant $(\varepsilon_{max})$ at the $T_C$ of $BaTiO_3$. This research reports the effect of $SrTiO_3$ addition on εmax at the $T_C$ of $BaTiO_3$ ceramics. Based on the chemical composition and the grain size dependence of the dielectric property of $BaTiO_3$ ceramics, functionally graded $(Ba,Sr)TiO_3$ composites were designed and fabricated. Multi-layered $(Ba,Sr)TiO_3$ composites with a compositional gradient of $SrTiO_3$ exhibited a low temperature coefficient and high dielectric constant in a wide temperature range.