• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.815-826
• /
• 2009

The paper presents a case study addressing the design and construction aspects for DCM(Deep Cement Mixing) method employed as the foundation of a caisson type breakwater with heavy weight(10,700 ton/EA) and a high design wave height($H_{1/3}$=8.7m). The DCM was designed for the project(Ulsan New Port North Breakwater Phase 1) by optimizing the pattern of DCM columns with a combination of short and long columns (i.e., block type(upper 3m)+wall type(lower)) and considering overlapped section between columns as a critical section against shear force where the coefficient of effective width of treated column($\alpha$) was estimated with caution. It was shown that the value can be 0.9 under the condition with the overlapped width of 30cm. In addition to that, a field trial test was performed after improving conventional DCM equipment (e.g., mixing blades, cement paste supplying pipes, multi auger motor, etc.) to establish a standardized DCM construction cycle (withdrawal rate of mixing blades) which can provide the prescribed strength. The result of the field strength test for cored DCM specimens shows that the averaged strength is larger than the target strength and the distribution of the strength(with a defect rate of 7%) also satisfies with the quality control normal distribution curve which allows defect rate of 15.9%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.4
• /
• pp.651-656
• /
• 2001

Ascorbic acid(AsA) is unevenly distributed throughout all body cells and fluids. Multiactivities of AsA in many biological systems and in various scientific fields were reported. In this study we aimed to clarify the inhibitory action of high concentration of AsA on the cell growth in 3T6 fibroblasts. The cells wee exposed to AsA at various concentration. It showed that 3T6 fibroblasts wee dead by the medium which contained AsA at the concentration higher than 0.5 mM. AsA caused hydrogen peroxide ($H_2O$$_2$) generation in a concentration dependent manner. These results suggested that the $H_2O$$_2$ was formed in the medium by AsA and acted as a cytotoxic gent. Moreover, it is supposed that hydroxyl radical (.OH) induced from $H_2O$$_2$also acetd as actively cytotoxic agent. This lethal effect of AsA causing the cell death was inhibited by the addition of catalase in the medium. Therefore, addition of AsA at the normal concentrations stimulate cell growth, but excess concentrations of AsA induce cell death.

• Korean Journal of Environmental Biology
• /
• v.33 no.4
• /
• pp.459-467
• /
• 2015

Understanding of a carbon storage in a regional scale ecosystem is a very important data for predicting change of global carbon cycle. Therefore, the real data collected in the various ecosystems are a very useful for enhancing accuracy of model prediction. We tried to estimate total accumulated ecosystem carbon in Deogyusan National Park (DNP) with naturally well preserved ecosystem. In DNP, vegetations were classified to four main communities with Quercus mongolica community (12,636.9 ha, 54.8%), Quercus variabilis community (2,987.0 ha, 13.0%), Pinus densiflora community (5,758.0 ha, 25.0%), and Quercus serrata community (402.9 ha,1.7%). Biomass and soil carbons were estimated by the biomass allometric equations based on the DBH and carbon contents of litter and soil (0~30 cm) layers collected in 3 plots ($30cm{\times}30cm$) in each community. The biomass and soil carbons were shown as high value as 1,759,000 tC and 7,776,000 tC, respectively, in Quercus mongolia community in DNP area. In Quercus mongolica, Quercus variabilis, Quercus serrata, Pinus densiflora communities, the accumulated ecosystem carbon were shown 9,536,000 tC, 1,405,000 tC, 147,000 tC, 346,000 tC, respectively. Also, the total ecosystem carbon was estimated with 11,434,000 tC in DNP.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.203-206
• /
• 2009

Ultra high strength steels(UHSS) are widely used to fill the needs of lightweight part for automobile, and the control of springback is very important (actor in sheet metal forming using UHSS. In this study, to lighten the center floor side member(CFSM) which is normally manufactured using $600{\sim}800MPa$ steel sheet, new design of the manufacturing process for CFSM using APFC980 has been proposed. To accomplish this goal, the influence of process variables such as die corner radius and die wall angle on the springback were investigated using FE-analysis. In order to insure the validity of FE-analysis, the springback results of FE-analysis was verified with prototype product.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.215-221
• /
• 2022

This study was carried out to investigate the growth characteristics, yield and chemical compositions of rye according to mixing ratio of chemical fertilize r(CF) and liquid swine manure (LSM) in paddy field cultivation. The experimental design was arranged in a randomized block design with three replications. The manure fertilizer ratio of five treatments were CF 100% + LSM 0% (C), CF 70% + LSM 30% (T1), CF 50% + LSM 50% (T2), CF 30% + LSM 70% (T3), and CF 0% + LSM 100% (T4) of rye. At this time, the application of liquid swine manure was based solely on nitrogen. Plant length did not show significant differences among treatments. Ear length, leaf length and leaf width were the longest in C, T3, and T2, respectively (p<0.05). The stem diameter showed in the order of T4 > T3 > T2 > T1 > C, which was thicker as the LSM application rate increased (p<0.05). Fresh, dry matter and total digestible nutrient (TDN) yield were the highest in T4 (p<0.05), whereas the lowest in C treatment. Crude protein, neutral detergent fiber (NDF), acid detergent fiber (ADF) and crude fiber content were did not show significant difference among treatments. However, compared to C, crude fat and crude ash were significantly higher in T2 and T3, respectively (p<0.05). Total mineral content decreased significantly as the LSM application rate increased (p<0.05). Total free sugar showed high in T3 and T4 with a high LSM ratio, but showed significantly lower in chemical fertilizer treatment (C) and low LSM treatment (T1) (p<0.05). The analysis of all the above results suggests that the application of LSM is very effective, considering the dry matter yield and the contents of free sugar. In addition, LSM may be possible to grow rye without chemical fertilizer.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.4
• /
• pp.7-11
• /
• 2015

The luffing-tower crane (T/C) is a key facility used in the vertical and horizontal transportation of materials in a tall building construction. Locating the crane in an optimal position is an essential task in the initial stages of construction planning. This paper proposes a new optimization model to locate the luffing T/C in the optimal position to minimize the transportation time. A newly developed mathematical formula is suggested to calculate the transportation time of luffing T/C correctly. An optimization algorithm, the Harmony Search (HS) algorithm, was used and the results show that HS has high performance characteristics to solve the optimization problem in a short period of time. In a case study, the proposed model offered a better position for T/C than the previous heuristic approach.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.9
• /
• pp.1570-1578
• /
• 2016

Commercial application of laccase is often hampered by insufficient enzyme stocks, with very low yields obtained from natural sources. This study aimed to improve laccase production by mutation of a Coriolopsis gallica strain and to determine the biological properties of the mutant. The high-yield laccase strain C. gallica TCK was treated with N-methyl-N-nitro-N-nitrosoguanidine and ultraviolet light. Among the mutants isolated, T906 was found to be a high-production strain of laccases. The mutant strain T906 was stabilized via dozens of passages, and the selected ones were further processed for optimization of metallic ion, inducers, and nutritional requirements, which resulted in the optimized liquid fermentation medium MF9. The incubation temperature and pH were optimized to be 30℃ and 4.5, respectively. The mutant strain T906 showed 3-times higher laccase activity than the original strain TCK under optimized conditions, and the maximum laccase production (303 U/ml) was accomplished after 13 days. The extracellular laccase isoenzyme 1 was purified and characterized from the two strains, respectively, and their cDNA sequence was determined. Of note, the laccase isoenzyme 1 transcription levels were overtly increased in T906 mycelia compared with values obtained for strain TCK. These findings provide a basis for C. gallica modification for the production of high laccase amounts.

• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.223-231
• /
• 2013

This research has a main focus on providing fundamental data for on-the-spot industrial fields by comparing and contrasting physical properties of fluffy spun-like material. The fluffy spun-like yarn is developed as fluffy yarn similar to natural spun-like yarn by treating polyester(FDY and + type shaped DTY) with ATY machine. In this experiment, using ATY machine for raw material texturing, we produced two fluffy yarns: (i) + type shaped(50d/36f, DTY) as core yarn and 100d/192f FDY as effect yarn[ATY(D)], (ii) FDY(75/36) as core yarn and 100d/192f FDY [ATY(F)] as effect yarn. After producing thous yarns, we twisted them with 500T/M, 700T/M, 1000T/M, respectively. produced yarns through this process were used as the samples for this experiment. Even though the shrinkage of fluffy yarn ATY(F) and ATY(D) becomes high as treated temperature rises and treated time lengthens, it is more affected by treated temperature then by treated time. In this experiment, produced fluffy yarn[ATY(D)] shows a little high values for temperature, but almost same values for higher temperatures. When we compare ATY(F) with ATY(D) fluffy yarn shows more natural fluffy yarn surface structure like natural cotton. The shrinkage of 700T/M twisted ATY(D) fluffy yarn show about 11% under treated temperature $180^{\circ}C$ and treated time 30min, and about 7% under $120^{\circ}C$ and 30min, respectively. But the shrinkage of 1000T/M fluffy yarn shoes about 9% and 6% under same conditions. Regarding treated time, tenacity and initial modulus of ATY(D) fluffy yarn rise high until 30min, but do not show much increase above 30min. Regarding treated temperature, tenacity and initial modulus of it rise high aboyer $140^{\circ}C$.

• Applied Biological Chemistry
• /
• v.48 no.3
• /
• pp.267-272
• /
• 2005

trans-Cinnamaldehyde, a major component of Cinnamomum cassia, was quantitatively analyzed using the $^1H-NMR$ spectrometry. Applicability of this method was confirmed through observing the variation of chemical shift in the $^1H-NMR$ spectrum of t-cinnamaldehyde and the integration value according to various sample concentrations or running temperatures. When the $^1H-NMR$ spectrometry was run for t-cinnamaldehyde (7.1429 mg/ml) at 19, 25, 30, 40 and $50^{\circ}C$, the chemical shifts of the doublet methine signal due to an aldehyde group were observed at 9.7202, 9.7184, 9.7169, 9.7142 and 9.7124 ppm, respectively, to imply that the running temperature had no significant variation in the chemical shift of the signal. The integration values of the signal were $1.37\;(19^{\circ}C),\;1.37\;(25^{\circ}C),\;1.37\;(30^{\circ}C),\;1.37(40^{\circ}C)$ and $1.37(50^{\circ}C)$, respectively, to also indicate running temperature gave no effect on the integration value. When the sample solutions with various concentrations such as 0.4464, 0.8929, 1.7857, 3.5714, 7.1429 and 14.286 mg/ml were respectively measured for the $^1H-NMR$ at $25^{\circ}C$, the chemical shifts of the aldehyde group were observed at 9.7206, 9.7201, 9.7196, 9.7192, 9.7185 and 9.7174 ppm. Even though the signal was slightly shifted to the high field in proportion to the increase of sample concentration, the alteration was not significant enough to applicate this method. The calibration curve for integration values of the doublet methine signal due to the aldehyde group vs the sample concentration was linear and showed very high regression rate ($r^2=1.0000$). Meantime, the $^1H-NMR$ spectra (7.1429 mg/ml $CDCl_3,\;25^{\circ}C$) of t-cinnamaldehyde and t-2-methoxycinnamaldehyde, another constituent of Cinnamomum cassia, showed the chemical shifts of the aldehyde group as ${\delta}_H$ 9.7174 (9.7078, 9.7270) for the former compound and ${\delta}_H$ 9.6936 (9.6839, 9.7032) for the latter one. The difference of the chemical shift between two compounds was big enough to be distinguished using the NMR spectrometer with 0.45 Hz of resolution. The contents of cinnamaldehyde in Cinnamomum cassia, which were respectively extracted with n-hexane, $CHCl_3$, and EtOAc, were determiend as 94.2 \;mg/g (0.94%), 137.6 mg/g (1.38%) and 140.1 mg/g(1.40%) t-cinnamaldehyde in each extract, respectively, by using the above method.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.125-126
• /
• 2004