• 한국환경과학회지
• /
• 제26권8호
• /
• pp.913-925
• /
• 2017

Phytoplankton populations were examined at three sites in Lake Cheongpyeong, South Korea from March 2008 to December 2016, including measurement of phytoplankton communities and their dominant species, abundance and environmental factors. The annual average ranges of water temperature, dissolved oxygen and conductivity were $15.2-18.8^{\circ}C$, 10.3-12.2 mg/L, $86-140{\mu}S/cm$, respectively, with similar values at all studied sites. The highest phytoplankton cell density was observed in spring and fall, and it subsequently decreased rapidly during heavy rainfall. Diatoms were dominant in spring (mainly Stephanodiscus hantzschii, Asterionella formosa) and fall (mainly Aulacoseira granulata), while greenalgae and cyanobacteria had high appearance in early-summer and summer, respectively, indicating that water temperature is the most important factor influencing their growth. Stephanodiscus hantzschii and Asterionella formosa frequently occurred at low water temperature ($4.5-15.0^{\circ}C$ and $5.4-21.6^{\circ}C$, respectively) while Aulacoseira granulata and Anabaena spp. were favored by high water temperature (8.6-28.4 and $14.9-26.2^{\circ}C$, respectively) and phosphorus. Additionally, Fragilaria crotonensis occurred at low nutrient conditions. Rhodomonas spp. frequently appeared year-round.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권5호
• /
• pp.16-25
• /
• 2015

The City of Boulder is located at an average elevation of 1,655 m (5,430 feet), the foothills of the Rocky Mountains in Colorado. Its daily air temperature is much varying and snow is very frequent and heavy even in spring. This paper examines characteristics of shallow (surface and depth = 10 cm) soil temperatures measured from January to May 2015 in the high elevation city Boulder, Colorado. The surface soil temperature quickly responded to the air temperature with the strongest periodicity of 1 day while the subsurface soil temperatures showed a less correlation and delayed response with that. The short-time Fourier of the soil temperatures uncovered their very low frequencies characteristics in heavy snow days while it revealed high frequencies of their variations in warm spring season. The daily minimum air temperature exhibited high cross-correlations with the soil temperatures without lags unlike the maximum air temperature, which is derived from its higher and longer auto-correlation and stronger spectrums of low frequencies than the maximum air temperature. The snow depth showed an inverse relationship with the soil temperature variations due to snow's low thermal conductivity and high albedo. Multiple regression for the soil temperatures using the air temperature and snow depth presented its predicting possibility of them even though the multiple r² of the regression is not that much satisfactory (r² = 0.35-0.64).

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.333-338
• /
• 2013

본 논문에서는 쇼트피닝 가공된 Alloy 600 재료의 고온환경하에서의 압축잔류응력 및 피로거동에 대해 연구하였다. 연구에 사용된 Alloy 600 재료는 원자력발전소에서 사용되는 주요부품 소재이며, 피닝가공으로 형성된 압축잔류응력은 응력부식균열(SCC; Stress Corrosion Cracking)의 발생을 크게 억제하는 것으로 알려져 있다. 현실성 있는 실험결과를 획득하기 위하여 실제 국내 원자력 발전소 주요부품의 사용온도를 포함한 고온 환경에서 피로특성 및 압축잔류응력을 평가하였다. 연구결과 약 $538^{\circ}C$이하에서는 피닝가공 효과가 존재하는 것으로 파악되었다. 피로수명은 $538^{\circ}C$ 까지 유지되는 것으로 분석되었으며, $538^{\circ}C$ 에서의 압축잔류응력은 상온에서의 값에 비하여 68.2%를 유지하였다. 본 연구결과는 원자력발전소의 안전 및 신뢰성 확보에 기초자료로 활용될 것으로 기대된다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.353-354
• /
• 2008

in the environment with high temperature and humidity, surface temperature of the display window should be increased more than the temperature of water-vapor in order to get rid of fog. In this study, we manufacture anti-fog window device which has better transparence and gets high temperature by using ITO.

• 통합자연과학논문집
• /
• 제17권1호
• /
• pp.1-12
• /
• 2024

Many abnormal climate events are occurring around the world. The cause of abnormal climate is related to temperature. Factors that affect temperature include excessive emissions of carbon and greenhouse gases from a global perspective, and air circulation from a local perspective. Due to the air circulation, many abnormal climate phenomena such as abnormally high temperature and abnormally low temperature are occurring in certain areas, which can cause very serious human damage. Therefore, the problem of abnormal temperature should not be approached only as a case of climate change, but should be studied as a new category of climate crisis. In this study, we proposed a model for the classification of abnormal temperature using random forests based on various meteorological data such as longitudinal observations, yellow dust, ultraviolet radiation from 2018 to 2022 for each region in Korea. Here, the meteorological data had an imbalance problem, so the imbalance problem was solved by oversampling. As a result, we found that the variables affecting abnormal temperature are different in different regions. In particular, the central and southern regions are influenced by high pressure (Mainland China, Siberian high pressure, and North Pacific high pressure) due to their regional characteristics, so pressure-related variables had a significant impact on the classification of abnormal temperature. This suggests that a regional approach can be taken to predict abnormal temperatures from the surrounding meteorological environment. In addition, in the event of an abnormal temperature, it seems that it is possible to take preventive measures in advance according to regional characteristics.

• 한국지열·수열에너지학회논문집
• /
• 제9권4호
• /
• pp.15-24
• /
• 2013

On this Thesis, We conduct a research of curtain wall high-rise apartment located in Songdo for preparing a simple method to check possibility of condensation on each part of curtain wall using only indoor temperature, humidity and outdoor temperature. According to CFD analysis result, condensation occurred if indoor environment did not ventilated. On the other hand, in case of ventilation on indoor environment, condensation did not appear; so I could find ventilation prevent surface condensation on inside surface of curtain wall. Moreover, when temperature of the floor is higher, condensation is decrease more than lower floor temperature.

• 한국추진공학회지
• /
• 제17권3호
• /
• pp.15-20
• /
• 2013

Graphite는 고온/고압의 가스가 추진기관 내의 구동장치에 유입되지 않게 기밀 소재로 사용되며, 마모 과정에서 윤활막을 형성하여 구조물 안에서 윤활과 기밀을 돕는다. 본 연구는 기밀 소재로 사용되는 Graphite의 고온 마모 시험을 통해 고온 마모 특성을 평가하였다. 고밀도 Graphite (HK-6)에 대하여 실제 작동환경에 기초 한 온도, 미끄럼 속도, 접촉 하중 조건에 따른 마모 특성을 평가 및 고찰하였다. 마모 표면 관찰을 통해 마모 메카니즘을 파악하고 고온 마모 특성을 통하여 최적화된 작동 환경 조건에 대하여 제안 하였다. 결과적으로, 상온에서 보다 고온 환경에서 윤활막 형성에 유리 하여 마찰 계수가 비교적 낮게 나타나는 것을 알 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.113-114
• /
• 2014

Though polymer cement mortar is widely used to repair or reinforce concrete as it has superior adhesion, dense internal structure, chemical resistance, and workability in comparison to those of general cement mortar, studies on its behaviors in high temperature environment such as fire is urgently required. Accordingly, in this experiment, the degrees of reduction in the compressive strength at different temperatures was grasped applying ISO834 Heating Curve, and the effect of polymer content and type on compressive strength could be determined. As a result of this experiment, it is found that polymer type and content have a big effect on reduction of compressive strength in high temperature range, and not only the dynamic characteristics but also the combustion characteristics in high temperature range are required to be studied considering occurrence of a fire in the future.

• 한국환경과학회지
• /
• 제26권9호
• /
• pp.1023-1029
• /
• 2017

We studied the distribution of air temperature using the high density urban climate observation network data of Daegu. The observation system was established in February 2013. We used a total of 38 air temperature observation points (23 thermometers and 18 AWSs). From the distribution of monthly averaged air temperatures, air temperatures at the center of Daegu were higher than in the suburbs. The daily minimum air temperature was more than or equal to $25^{\circ}C$ and the daily maximum air temperature was more than or equal to $35^{\circ}C$ at the elementary school near the center of Daegu. Also, we compared the time elements, which are characterized by the diurnal variation of surface air temperature. The warming and cooling rates in rural areas were faster than in urban areas. This is mainly due to the difference in surface heat capacity. These results indicate the influence of urbanization on the formation of the daily minimum temperature in Daegu.

• 한국정밀공학회지
• /
• 제18권11호
• /
• pp.138-147
• /
• 2001

Alignment systems are frequently used under various semiconductor manufacturing environment. Particularly in PDP(Plasma Display Panel) manufacturing process, the alignment system is applied to the combining and sealing processes of the upper and lower glass panels of PDP, where these processes are performed in the vacuum chamber of high vacuum and high temperature. In this paper, the XYΘ-alignment stage is developed to align PDP panels. Because of high vacuum and high temperature environment, the alignment chamber has been designed to isolate the inner part of the alignment chamber from the outer environment of high vacuum and high temperature, in which every part of the alignment stage is inserted. As it is difficult to attach feedback sensors to the alignment stage in the alignment chamber, the alignment stage is implemented with the open loop algorithm, where the parallel link structure has been designed using step-motors and ball-screws for structural simplicity. The kinematic analysis is performed to drive the parallel link structure, based on the experiments of actuation-compensation of the alignment stage. For the error compensation, the hyperpatch model has been used to model the errors. From the experiments, the positional accuracy of the alignment stage can be improved significantly.