• 제목/요약/키워드: High temperature air combustion

검색결과 330건 처리시간 0.029초

스파크 점화기관 냉간 시동시 플라즈마 광촉매 복합장치에 의한 탄화수소 화합물 저감에 관한 실험적 연구 (The Study of the Effects of Nonthermal Plasma-Photocatalyst combined Reactor on Hydrocarbon Decomposition and Reduction during Cold Start and Warm-up in a SI Engine)

  • 이택헌;전광민;전배혁;신영기
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.169-178
    • /
    • 2001
  • Among the recent research ideas to reduce hydrocarbon emissions emitted from SI engines till light-off of catalyst since cold start are those exploiting non-thermal plasma technique and photo-catalyst that draws recent attention by virtue of its successful application to practical use to clean up the atmosphere using the feature of its relative independence on temperature. Based on the previous research results obtained with model exhaust gases using an experimental emissions reduction system that utilizes the non-thermal plasma and photo-catalyst technique, further investigation was conducted on a production N/A 1.5 liter DOHC engine during cold start to warm-up. For the effects of non-thermal plasma-photocatalyst combined reactor, 10% concentration reduction was achieved with the fuel component paraffins, and the large increase in non-fuel paraffinic components and acetylene concentrations were similar to those of base condition. However the absolute value was locally a bit higher than those of base condition since the products was made from the dissociation and decomposition of highly branched paraffins by plasma-photocatalyst reactor. Olefinic components were highly decomposed by about 75%, due to these excellent decompositions of olefins which have relatively high MIR values, and the SR value was 1.87 that is 30% reduction from that of base condition, then, the photochemical reactivity was lowered.

  • PDF

Ultralow-n SiO2 Thin Films Synthesized Using Organic Nanoparticles Template

  • Dung, Mai Xuan;Lee, June-Key;Soun, Woo-Sik;Jeong, Hyun-Dam
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권12호
    • /
    • pp.3593-3599
    • /
    • 2010
  • In an original effort, this lab attempted to employ polystyrene nanoparticles as a template for the synthesis of ordered and highly porous macroporous $SiO_2$ thin films, utilizing their high combustion temperature and narrow size distribution. However, polystyrene nanoparticle thin films were not obtained due to the low interaction between individual particles and between the particle and silicon substrate. However, polystyrene-polyacrylic acid (PS-AA) colloidal particles of a core-shell structure were synthesized by a one-pot miniemulsion polymerization approach, with hydrophilic polyacrylic acid tails on the particle surface that improved interaction between individual particles and between the particle and silicon substrate. The PS-AA thin films were spin-coated in the thickness ranges from monolayer to approximately $1.0\;{\mu}m$. Using the PS-AA thin films as sacrificial templates, macroporous $SiO_2$ thin films were successfully synthesized by vapor deposition or conventional solution sol-gel infiltration methods. Inspection with field emission scanning electron microscopy (FE-SEM) showed that the macroporous $SiO_2$ thin films consist of interconnected air balls (~100 nm). Typical macroporous $SiO_2$ thin films showed ultralow refractive indices ranging from 1.098 to 1.138 at 633 nm, according to the infiltration conditions, which were confirmed by spectroscopy ellipsometry (SE) measurements. This research shows how the synthetic control of the macromolecule such as hydrophilic polystyrene nanopaticles and silicate sol precursors innovates the optical properties and processabilities for actual applications.

연소배가스 모니터링을 위한 $SnO_{2}$계 CO센서의 검지특성 (Sensing Characteristics of $SnO_{2}$ type CO sensors for combustion exhaust gases monitoring)

  • 김일진;한상도;임한조;손영목
    • 센서학회지
    • /
    • 제6권5호
    • /
    • pp.369-375
    • /
    • 1997
  • $SnO_{2}$$V_{2}O_{5}/ThO_{2}/Pd$를 도핑하여 제조된 센서는 약 $500^{\circ}C$의 높은 센서 온도에서 CO에 대해 우수한 선택도와 안전성 및 빠른 응답특성을 보였다. 특히, $V_{2}O_{5}$를 약 3.0 wt.% 첨가하여 선택도에 있어서 CO 감도에 대해 $NO_{x}$, $C_{3}H_{8}$, $CH_{4}$$SO_{2}$같은 많은 간섭가스들의 영향이 적음을 알았다. 센서 제조는 $V_{2}O_{5}$(3.0 wt.%), $ThO_{2}$(1.5wt.%), Pd(1.0 wt.%)의 촉매물질과 함께 기존에 잘 알려진 후막기술을 이용하였다. 일반적으로 연소배가스처럼 $NO_{x}$와 CO가 혼합되어 있는 복합가스의 경우, $SnO_{2}$계 반도체 센서로는 CO만의 검지는 $NO_{x}$ 간섭 때문에 대단히 어렵다. 본 센서는 공연비제어를 요하는 자동차나 보일러 시스템의 연소배가스의 측정과 감시에 사용할 수 있을 것이다.

  • PDF

시뮬레이션을 활용한 유동층보일러 수냉벽튜브 검사용 원격장 와전류 탐상 센서 설계 (Design of Remote Field Eddy Current Sensor for Water-Wall Tube Inspection using Simulation)

  • 길두송;권찬울;조용상;김학준
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제5권1호
    • /
    • pp.33-38
    • /
    • 2019
  • 화력발전은 국내 발전량 중 가장 높은 비율을 차지하고 있으며, 그 중 석탄보일러 발전이 가장 높은 비율을 차지하고 있다. 석탄보일러는 석탄 연소 중 유해 물질 및 미세먼지가 발생하여 대기오염에 심각한 영향을 미친다. 이에 친 환경 석탄보일러로 유동층보일러가 도입 되었으며, 이는 유동매체를 활용하여 기존의 석탄보일러보다 약 1/10정도 적은 오염물질을 배출한다. 수냉벽튜브는 이 유동층보일러에서 중요한 역할을 하는 구조물로, 유동층보일러의 특성상 기존의 보일러보다 외벽손상이 심하다. 하지만 아직까지 이에 대한 정량적인 유지보수 기법이 없다. 원격장 와전류 탐상은 튜브형태의 내, 외벽 검사에 많이 사용되는 비파괴평가 기법으로, 비접촉이며 빠른 검사가 장점이다. 하지만 원격장 와전류 탐상은 본래 배관 내부에서 진행하는 검사이며, 수냉벽튜브는 특성상 내부 진입이 불가능하다. 이에 본 연구에서는 시뮬레이션을 활용해 유동층보일러 수냉벽튜브에 적합한 외부 원격장 와전류 탐상 센서에 대한 설계를 진행하고, 시뮬레이션을 수행하였으며, 기존 원격장 와전류 탐상과 유사한 신호를 얻음으로써 추후 실제 제작 될 원격장 와전류 탐상 센서에 대한 기준을 제시하였다.

유동층 공정을 이용한 열화학적 전환 공정의 최신 개발 동향 (Recent Development of Thermo-chemical Conversion Processes with Fluidized Bed Technologies)

  • 박현준;오승석;;;정철승;박한샘;이시훈
    • Korean Chemical Engineering Research
    • /
    • 제61권1호
    • /
    • pp.8-18
    • /
    • 2023
  • 지속적인 인구의 증가와 경제의 발전으로 인한 전세계 에너지 수요의 증가는 화석연료의 이용을 끊임없이 증가시키고 있다. 그러나 화석연료에 대한 높은 의존도는 환경오염과 급격한 지구온난화라는 새로운 문제를 야기시켰다. 이의 해결을 위해 전통적인 연소에서 벗어나 열분해, 가스화와 같은 새로운 열화학적 전환 공정을 이용한 청정 에너지 생산이 빠르게 확산되고 있다. 특히 다양한 연료의 이용, 쉬운 연속조업, 높은 열 및 물질전달, 등온 조업, 낮은 조업 온도 등의 특성들을 가지는 유동층 공정은 열화학적 에너지 전환에 적합하기 때문에 널리 채택되어 이용되고 있다. 이에 본 총설에서는 열분해, 가스화, 연소에 적용된 최근의 유동층 공정 연구의 중요한 결과들을 정리하였다. 더불어 유동층 열화학적 공정에서 주로 연구되지 않은 층물질, 미세먼지 저감을 위한 물질(바이오매스, 천연 자원 폐기물 등)과 같은 연구의 필요성을 제시하였다. 이를 통해 유동층 기술에 대한 관심과 이해를 높이고, 유동층 공정 기술 개발의 미래 과제를 해결하기 위한 방향을 제시하고자 한다.

반 건조 하수슬러지와 폐플라스틱 혼합물의 파일롯 규모 연속식 열분해에 의한 생산물과 발생 오염물질 (Products and pollutants of half dried sewage sludge and waste plastic co-pyrolysis in a pilot-scale continuous reactor)

  • 김용화;천승규
    • 한국응용과학기술학회지
    • /
    • 제34권2호
    • /
    • pp.327-337
    • /
    • 2017
  • 반 건조 소화 하수슬러지와 폐플라스틱을 혼합하여 파일롯 규모(85.3kg/hr)의 연속식 저온($510^{\circ}C{\sim}530^{\circ}C$) 열분해 실험을 하였다. 실험결과 열분해가스 발생량은 투입물 건량의 최대 68.3%, 발열량은 $40.9MJ/Nm^3$이었으며, 연속식 열분해에 따른 외기 유입율이 19.6%이었다. 오일은 투입물 건량의 4.2%가 발생하였고, 저위발열량은 32.5 MJ/kg이었으며 시설부식 등을 일으킬 수 있는 황과 염소의 함량이 각각 0.2% 이상이었다. 투입물 건량의 27.5%가 발생한 탄화물의 저위 발열량은 10.2 MJ/kg이었고, 용출시험 결과 지정폐기물에 해당하지 않았다. 열분해가스의 연소 배가스는 일산화탄소, 황산화물, 시안화수소 등의 배출농도가 특히 높았고, 다이옥신 (PCDDs/DFs)은 $0.034ng-TEQ/Sm^3$로서 법적 기준치 이내였다. 건조 배가스 응축으로 발생한 폐수는 수질오염물질 47개 항목 중 총질소, n-H 추출물질, 시안 등의 고농도 항목이 많아 전처리 후 하수처리장 등에서의 병합처리 방식을 고려할 필요가 있었다.

자동차 선적작업장의 공기오염 실태조사 (Investigation into Air Pollution in Car Shipping Workshop in Pyeongtaek Port)

  • 김지호;원종욱;김치년;노재훈
    • 한국산업보건학회지
    • /
    • 제16권1호
    • /
    • pp.44-53
    • /
    • 2006
  • This study purposed to investigate air pollution in car shipping yards and, for this purpose, we selected an outdoor open-air yard and an indoor ramp into the ship and measured the concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10, PM2.5 and heavy metals in the air. The results of this study are as follows. No significant difference was observed in temperature and humidity between the outdoor and indoor workshop, and the average air flow was 0.52 m/s in the indoor workshop, which is higher than 0.19 m/s in the outdoor workshop(p<0.01). The average concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10 and PM2.5 according to workplace were 0.03 ppm(${\pm}0.01$), 0.03 ppm(${\pm}0.01$), 0.46 ppm(${\pm}0.22$), $39.44{\mu}g/m^3$(${\pm}2.45$) and $5.45{\mu}g/m^3$(${\pm}1.15$) respectively in the outdoor workshop, and 0.15 ppm(${\pm}0.05$), 0.22 ppm(${\pm}0.06$), 8.85 ppm(${\pm}3.35$), $236.39{\mu}g/m^3$(${\pm}58.21$) and $152.43{\mu}g/m^3$(${\pm}35.42$) respectively in the indoor workshop. Thus, the concentrations of gaseous substances in the indoor workshop were 4.9-19.2 times higher than those in the outdoor workshop, and the concentrations of fine dusts were 5.9-27.9 times higher(p<0.01). In addition, according to the result of investigating pollutant concentrations according to displacement and the number of car loaded when shipping gasoline cars into the ship, no significant relation between the number of cars loaded and pollutants was observed in shipping passenger cars, but the concentrations of nitrogen dioxide and carbon monoxide got somewhat higher with the increase of the number of cars loaded(p<0.05). In addition, the concentrations of nitrogen dioxide, carbon monoxide, PM10 and PM2.5 in the air were significantly higher when shipping recreational vehicles, the displacement of which is larger than passenger cars, than when shipping passenger cars(p<0.01). On the other hand, the average heavy metal concentrations of the air in indoor workshop were: lead $-0.05{\mu}g/m^3$(${\pm}0.10$); chromium $-0.90{\mu}g/m^3$(${\pm}0.18$); zinc $-0.38{\mu}g/m^3$(${\pm}0.24$); copper $-0.18{\mu}g/m^3$(${\pm}0.22$); and manganese and cadmium not detected. In addition, the complaining rates of 'asthma,' a major symptom of chronic respiratory diseases, were 18.5% and 22.5% respectively in indoor workers and outdoor workers. Thus the rate was somewhat higher in indoor workers but the difference was not statistically significant. The complaining rates of 'chronic cough' and 'chronic phlegm' were very low and little different between indoor and outdoor workers. The results of this study show that the reason for the higher air pollution in indoor than in outdoor workshop is incomplete combustion of fuel due to sudden start and over-speed when cars are driven inside the ship. In order to prevent high air pollution, efficient management measures should be taken including the observance of the optimal speed, the improvement of old ships and the installation of efficient ventilation system.

열적방법을 활용한 유기염소계 폐농약의 분해 특성 평가 (Evaluation of Decomposition Characteristics of Organochlorine Pesticides Using Thermal Method)

  • 권은혜;윤영삼;배지수;전태완;이영기
    • 한국폐기물자원순환학회지
    • /
    • 제35권8호
    • /
    • pp.744-753
    • /
    • 2018
  • The Stockholm Convention, which was adopted in Sweden in 2001 to protect human health and the environment, includes regulations for Persistent Organic Pollutant Rotors such as toxic and bioaccumulatives. Currently, there are 28 types of materials. This prohibits and limits the production, use, and manufacture of products. Korea is a member of the Convention, and it is necessary to prepare management and treatment plans to address the POP trends. Thus, we experimentally investigate whether the environmentally stable incineration is achieved when the sample is thermally treated using the Lab-scale (1 kg/hr). The target samples is pesticides in liquid phase and solid phase. In this study, organic chlorinated pesticides and their thermal characteristics were analyzed. We calculated the theoretical air volume based on the element analysis results. Because the interior of the reactor is small, more than 10 times of the air ratio was injected. The retention time was set to at least 4 seconds using a margin. The incineration temperature was $850^{\circ}C$ and $1100^{\circ}C$. Thus, we experimentally investigated whether the environmentally stable incineration was achieved when the sample was thermally treated using the Lab-scale (1 kg/hr). We analyzed five types of exhaust gas; the 02 concentration was high, but the CO amount decreased. Complete combustion is difficult because of the small size of the furnace due to the nature of Lab-scale. The organic chlorine-containing pesticide had an average decomposition rate of 99.9935%. Considering the decomposition rates of organic chlorine-containing pesticide in this study, the incineration treatment at over 2 ton/hour, which is typical for a conventional incinerator, is possible. Considering the occurrence of dioxins and unintentional persistent organic pollutants, it can operate at more than $1,100^{\circ}C$.

수열합성법으로 합성된 마그네타이트 분말에 대한 산화.환원 특성 (Characterisitics of Redox Reaction of the Magnetite Powder Prepared by Hydrothermal Synthesis)

  • 박성열;강민필;이영우;남성찬
    • Korean Chemical Engineering Research
    • /
    • 제43권6호
    • /
    • pp.751-755
    • /
    • 2005
  • 화석연료의 연소에 의해 발생하는 연소배가스에 포함된 이산화탄소는 대표적인 온실 가스로 알려졌으며 지구 온난화를 방지하기 위하여 다양한 제거 및 활용 기술에 대한 연구가 진행되고 있다. 본 연구는 연소배가스에서 분리된 이산화탄소를 마그네타이트 분말을 이용하여 재활용하기 위한 방안을 찾기 위한 노력의 일환으로 수행하였다. $FeSO_4{\cdot}7H_2O$와 NaOH 수용액을 혼합하여 알칼리도를 달리하고 산화제를 달리한 다음 합성온도를 50, 80, 90, $100^{\circ}C$로 하여 마그네타이트 분말을 제조하였으며 XRD와 SEM을 이용하여 분석하였다. 산성 영역보다 염기성 영역 그리고 합성온도가 높을수록 높은 결정성을 갖는 입방정(cubic) 형태의 스핀넬 타입 마그네타이트 분말이 합성되었다. TGA를 이용하여 합성된 분말의 수소에 의한 환원 및 이산화탄소 흡수에 의한 산화특성을 연구하였다. 그 결과, 낮은 합성온도와 산성영역에서는 입방정 형태를 갖는 분말이 생성되지 않았으며 대부분 무정형의 상만이 존재하였다. 그러나 합성온도가 높고 염기성 영역으로 갈수록 높은 결정성과 입방정 형태를 갖는 입자가 나타났다. 또한, 반응 시 산화제로 산소와 공기를 사용한 경우와 질소를 사용한 경우를 비교하였을 때, 산소 함량이 높을수록 우수한 결정성을 갖는 분말이 합성되었다. 합성된 분말을 사용하여 Redox 반응을 수행한 결과, $400^{\circ}C$ 이하에서는 수소에 의한 환원과 이산화탄소 흡수에 의한 산화 반응이 거의 일어나지 않았으나, $500^{\circ}C$에서는 환원 및 산화 반응이 잘 이루어졌다. 특히, 산소를 산화제로 사용하고 염기성영역(NaOH에 대한 $FeSO_4{\cdot}7H_2O$의 몰랄농도비=2.0)에서 $100^{\circ}C$로 합성한 분말이 반응온도 $500^{\circ}C$에서 가장 높은 27.15 wt%의 환원량과 26.75 wt%의 산화량을 보였다.

마이크로버블과 환원제를 이용한 습식 NO 및 SO2의 동시제거 (Simultaneous Removal of NO and SO2 using Microbubble and Reducing Agent)

  • 송동훈;강조홍;박현식;송호준;정용철
    • 청정기술
    • /
    • 제27권4호
    • /
    • pp.341-349
    • /
    • 2021
  • 연소시설에서는 화석연료에 포함된 질소와 황이 산소와 반응하여 대기 오염물질인 질소산화물(NOX)과 황산화물(SOX)을 발생시킨다. 인체에 유해하고 환경 오염을 야기하는 NOX, SOX를 저감하기 위해 전세계적으로 환경규제를 시행 중이며, 규제를 충족하기 위해 다양한 기술들을 적용하고 있다. 상용화된 NOX 및 SOX 저감방식들로 SCR (selective catalytic reduction), SNCR (selective non-catalytic reduction), WFGD (wet flue gas desulfurization) 등이 있으나 이 방식들의 단점들 때문에 NOX, SOX를 동시제거하는 연구가 근래 많이 수행되고 있다. 그러나 NOX, SOX 동시 제거 방식에서도 산화제 및 흡수제로 인한 폐수 발생에 대한 문제점, 특정 산화제를 활성화 하기 위한 촉매 및 전기분해 사용에 따른 비용 발생, 마지막으로 기체 산화제들 자체 유해성의 문제점을 가지고 있다. 따라서 본 연구에서는 NOX, SOX 동시처리 방식의 단점들을 보완하고자 고압분산기에서 생성된 마이크로버블과 환원제를 이용하여 비용절감 및 폐수처리 시 환경부하저감 가능성을 확인해 하고자 하였다. 분산기가 마이크로버블을 생성하는 것을 이미지 프로세싱과 ESR (electron spin resonance) 분석을 통해 확인하였으며, 마이크로버블만을 이용하여 온도에 따른 NOX, SOX 제거율 성능 테스트도 진행하였다. 뿐만 아니라 폐수를 저감하기 위해 환원제와 마이크로버블을 이용하여 습식으로 NOX 제거율 약 75%, SOX 제거율 99%를 달성하였다. 본 마이크로버블 시스템에 산화제를 함께 투여할 경우 NOX, SOX제거율 모두 99%이상을 달성 하였다. 이러한 연구 결과를 토대로 습식산화제거방식을 적용하는 시설의 단점이었던 비용 및 환경 문제를 해결함에 기여할 수 있을 것으로 기대 된다.