• Journal of the Korean Home Economics Association
• /
• v.40 no.10
• /
• pp.201-215
• /
• 2002

This study is to compare the effects of personality characteristics on marital quality of the husband and the wife. Marital quality was measured in two aspects: marital satisfaction and marital conflict. At the first step of the regression analysis, socio-demographic variables were entered, at the second step, variables of personality characteristics, and at the third step, variables of personality characteristics of the spouse were added. Age group of 35 and under is higher in marital satisfaction or lower in marital conflict than that of 36 to 40. People who grew up in Chungchung area are lower in marital satisfaction compared to those who grew up in Seoul and adjacent area, and those who grew up in Chunla area are higher in marital satisfaction. Marital conflict increases when people are less educated. Marital conflict decreases when the husband has high income. Religion is related to marital satisfaction and marital conflict of the husband. Stability is related to both marital satisfaction and marital conflict. Sociability of the wife is related to marital satisfaction and marital conflict of the husband, and responsibility of the wife is related to her own marital conflict. Responsibility of the husband is related to marital conflict of the wife. This result shows that the husband is expected to perform the instrumental role and the wife the expressive role. In, conclusion, these results should be considered when family life education programs for couples are constructed. First, family life cycle needs to be considered when family life education programs are offered. Second, regional differences in family culture should be put into consideration. Third, the idea that conjugal role relationships can be flexible needs to be included in family life education programs. Fourth, programs to improve stability, responsibility and sociability are needed for wives. Fifth, programs to improve stability and responsibility should be offered in work settings for husbands.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.343-354
• /
• 2009

In this paper, a magnetic-less dc-dc switching converter realizing an integrable power conversion system is described. Instead of magnetic devices, the inductive impedance range of piezoelectric transducers is utilized to store and resonate the energy for soft-switching. Piezoelectric devices have no windings and deliver the power by the electrodes, which lead to mass product through semiconductor-manufacturing process. This paper presents a resonant-type step-up dc-dc power converter employing a disk-type piezoelectric transducer, analyzing the operation principles and the frequency control characteristics. Also, a topology extension of the single stage converter into cascaded multi-stage is presented and analyzed with the operation principles and control characteristics. For verification of the analysis, a 10W output dc-dc power converter hardware was implemented. The hardware experiments shows a good frequency control and power efficiency greater than 96% in the single stage. A hardware prototype of the extended multi-stage one was also realized and tested. The results shows that the converter has the same frequency control performance and high efficiency such as 93%.

• Journal of Korea Multimedia Society
• /
• v.24 no.2
• /
• pp.178-185
• /
• 2021

Three-dimensional high-resolution magnetic resonance imaging (MRI) provides fine-level anatomical information for disease diagnosis. However, there is a limitation in obtaining high resolution due to the long scan time for wide spatial coverage. Therefore, in order to obtain a clear high-resolution(HR) image in a wide spatial coverage, a super-resolution technology that converts a low-resolution(LR) MRI image into a high-resolution is required. In this paper, we propose a super-resolution technique through filter learning based on information on the surrounding gradient information in 3D space from 3D MRI images. In the learning step, the gradient features of each voxel are computed through eigen-decomposition from 3D patch. Based on these features, we get the learned filters that minimize the difference of intensity between pairs of LR and HR images for similar features. In test step, the gradient feature of the patch is obtained for each voxel, and the filter is applied by selecting a filter corresponding to the feature closest to it. As a result of learning 100 T1 brain MRI images of HCP which is publicly opened, we showed that the performance improved by up to about 11% compared to the traditional interpolation method.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.149-163
• /
• 2004

This study analyzed kinematic variables about the cross step, the delivery and the release for women's javelin athletics recorded over 50m in the 2004 Busan International Athletics Competition. It was used the Kwon3D Motion Analysis Package Ver. 3.1 Program(Kwon, 2000) for analysing the kinematic variables about the distance, the velocity, and the angle, then we had the results as follows; 1 In the Cross step phase, the COG velocity was low because their step length was short. To keep the CM velocity from the approach to the last cross over step contact, the athletes have to keep the longer step length within about 130% of the athletics' height. 2. In the Delivery phase, the athletics' COG height was gradually lower, and the deceleration of the COG was going up. As the same in the cross step, Therefore the athletes have to increase the step length within about 100% of their height, in order to increasing the COG velocity. And it was shown they have to make small angle of the elbow as possible from the right foot contact to the left foot contact in order to being the big acceleration of the upperarm at the release phase. 3. In the release phase, it was shown to being low position of the release point as the COG was low and then the release velocity of the upperarm was low. Specially when the shoulder lean lateral angle is big at the release phase, it was shown they have a excessive release angle. And, when it was shown the high rotation angle of the shoulder, the shoulder was opened forward bigger than the trunk was opened forward. So the transmission of velocity from the proximal segments was a fast change.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.3
• /
• pp.116-121
• /
• 2009

The 2-step low temperature plasma processes (the combined carburizing and post-nitriding) offer the increase of both surface hardness and thickness of hardened layer and corrosion resistance than the individually processed low temperature nitriding and low temperature carburizing techniques. The 2-step low temperature plasma processes were carried out for improving both the surface hardness and corrosion resistance of AISI 316L stainless steel. The influence of gas compositions on the surface properties during nitriding step were investigated. The expanded austenite (${\gamma}_N$) was formed on all of the treated surface. The thickness of ${\gamma}_N$ and concentration of N on the surface increased with increasing both nitrogen gas and Ar gas levels in the atmosphere. The thickness of ${\gamma}_N$ increased up to about $20{\mu}m$ and the thickness of entire hardened layer was determined to be about $40{\mu}m$. The surface hardness was independent of nitrogen and Ar gas contents and reached up to about 1200 $HV_{0.1}$ which is about 5 times higher than that of untreated sample (250 $HV_{0.1}$). The corrosion resistance in 2-step low temperature plasma processed austenitic stainless steels was also much enhanced than that in the untreated austenitic stainless steels due to a high concentration of N on the surface.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.4
• /
• pp.315-322
• /
• 2009

In the conventional boost converter, the actual duty cycle is limited as the output voltage increases due to increased voltage and current stress of the switch and diode and voltage surge caused by diode reverse recovery. In this paper a new non-isolated boost converter suitable for high gain applications is proposed. The proposed converter has voltage gain of around 6 when the duty cycle is 0.5. Since ZVS is achieved under CCM, the proposed converter has wide ZVS range. Also, voltage ratings of switch and diode are the same as one third of output voltage, and ratings of input and output passive components are reduced due to the interleaving. In addition voltage surge caused by diode reverse recovery is negligible due to ZCS turn-off of diodes. Operating principle of the proposed converter is described and validated through theoretical analysis, simulation and experiment.

• Journal of the Korean Ceramic Society
• /
• v.35 no.7
• /
• pp.659-664
• /
• 1998

Densification behavior of $Si_3N_4$ ceramics by two step gas pressure sintering was compared with pres-sureless sintering one step gas pressure sintering or hot isostatic pressing. While it was difficult to get the highly interlocked ${\beta}-Si_3N_4$ microstructure during the pressureless sintering due to decomposition above $1800^{\circ}C$ gas pressure sintering could solve this problem by increasing the densification temperature 2MPa of nitrogen pressure was enough to inhibit the decomposition up to $1890^{\circ}C$ and especially two step gas pres-sure sintering applying comparatively low pressure(2MPa) until the closed pore stage and then high pres-sure(10MPa) after pore closure could increase the hardness and the toughness.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.2 s.69
• /
• pp.46-51
• /
• 2006

Moonpool characteristics of a cleaning skip related with the performance of a skip are experimentally investigated. Resistance performances of the ship and flow patterns in the moonpool are observed, in order to determine the effect of different shaped moonpool. The ways to reduce ship pithing motion caused by force in the moonpool are examined. Experimental results, using a scale model of cleaning ship with moonpool, show that the step arranged in tier under water leads to significant improvements in performance, such us resistance and ship pithing motion. Depending upon the shape of step in the moonpool, the results indicate that the increment of resistance performance may be up to 35%, especially in the case of no step or high step.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1284-1297
• /
• 2019

The network environment is presently becoming very increased. Accordingly, the study of traffic classification for network management is becoming difficult. Automatic signature extraction system is a hot topic in the field of traffic classification research. However, existing automatic payload signature generation systems suffer problems such as semi-automatic system, generating of disposable signatures, generating of false-positive signatures and signatures are not kept up to date. Therefore, we provide a fully automatic signature update system that automatically performs all the processes, such as traffic collection, signature generation, signature management and signature verification. The step of traffic collection automatically collects ground-truth traffic through the traffic measurement agent (TMA) and traffic management server (TMS). The step of signature management removes unnecessary signatures. The step of signature generation generates new signatures. Finally, the step of signature verification removes the false-positive signatures. The proposed system can solve the problems of existing systems. The result of this system to a campus network showed that, in the case of four applications, high recall values and low false-positive rates can be maintained.

• Journal of Korean Public Health Nursing
• /
• v.10 no.2
• /
• pp.103-118
• /
• 1996

It is to be growing up the interest of community health affairs through visiting nursing care. The health medical treatment of Korea has been changed largely on the period. The juvenile population has decreased. This means that is has took the population consensus of advanced national organization to be increased by the old age. The transition of disease has changed from the contagious disease importance to the chronicity disease omportance because the domestic district population has experienced the sudden urbanization circumstance district population has experienced the sudden urbanization circumstance to be growing up $70\%$ of the whole population. When the nursing service has common function to be delivering from all direction to home, this study is getting the great important phase velocity in order to manage the kernel questional adult chronicity disease of health medical institution at the present age. (1) community over system or with people particularity (2) the first of third step medical treatments. The variety of medical treatments organization has quantity of the delivery manpower and specially between consumers and rdlated person. A qualitative difference is showed at the purpose to be seizing. That research related person is use at district health center in Seoul, by foundation on nurse registration book of H collage hospital and public health registration book. According the chronicity disease. age. and sex. nature agree-able standard 54 people took the content analysis on nurse registration book of total 108 people. The results of the study were as follows: 1. General background factors are houses or kind of medical facilities and number of patients in family. The first medical treatment is more patients than third medical treatment organization. The first medical treatment of economic environment os appering to be worse. 2. The chronicity disease frequency have been different speciality according to medical treatment organization. On case of the first medical treatment. Diabetes and High Blood Pressure were good but Cerebrum Vascular Accident(CVA) showed many for bed case. In addition. the number of family is comparative large exception of CVA on according for moving condition and health more than the first medical treatment. However. family condition. whole family percentage is decreasing preferably through the potential resource is increasing by the number of and the construction of family. The ability of real resource is considered to be low. 3. The average percentage of nurse service has appered to be differed two groups by the first step medical treatment(33.72 times) and third step medical treatment(45.70 times). However, the difference (the first step medical treatment and third step medical treatment) is to be limited to issue the medicine at the service. The condition of nurse care was the indirect nursing care. Supportiong area was to be related to volunteer service and administration support. 4. The various nursing care average percentage of the chronicity disease was increased by orders of Diabetes. High Blood Pressure. and CVA in examination result and the medical treatment. The indirect nursing care was also same. At third step medical treatment, orders of chronicity disease were same. The case of other area on service conditions were increased by order of Diabetes. High Blood Pressure, and CVA. However. it is never appearing the difference at bottleneck affairs nursing care. 5. When the visiting nursing care demand particularly. the average percentage of nursing care from the first step medical treatment that the time under a person is many more than the time over two people. However, there was no difference in statistic. Third step medical treatment is $49.81\%$ at the time under a person. The average nursing care service is appeared by more many when the visiting nursing care demand is a few by 12.83 at the time over two people. 6. By visiting nursing care percentage to be frequency that nursing care averaghe percentage and inter-relation are large. The related factor of the first medical treatment is 0.96. However, the related factor of third medical treatment has shown the decreased 0.49 for the condition of relation more than that. Therefore. the nursing care average percentage is related to the visiting times of a nurse. This result is be showing the obvious fact that the first step medical treatment is few more than third step medical treatment.