• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2004.05a
• /
• pp.245-250
• /
• 2004

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.290-295
• /
• 2015

The purpose of this study is to separate nitrocellulose from 175 mm ammunition propellant by environmentally responsible recovery method. Recovery of nitrocellulose from obsolete ammunition is much more desirable than destruction since it can be reused in the several purpose. In spite of durable demilitarization of obsolete ammunition, the current holding amount of obsolete ammunition is gradually increasing and accumulated. The existing demilitarization methods, such as incineration and priming are strictly restricted for the noise, dust, oscillation and air and soil pollution. This study is focused on the separation of nitrocellulose by environmentally responsible recovery method by the solubility difference of nitrocellulose in nonpolar solvent. The purity of an extracted nitrocellulose was analysed by IR and TLC method and was clarified as very high.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.2
• /
• pp.177-183
• /
• 2020

To utilize hydrogen energy, high-yield, high-purity hydrogen needs to be produced; therefore, hydrogen separation membrane studies are being conducted. The membrane reactor that fabricates hydrogen needs to have high hydrogen permeability, selective permeability, heatresistant and a stable mechanical membrane. Dense membranes of Pd and Pd alloys are usually used, but these have drawbacks associated with high cost and durability. Therefore, many researchers have studied replacing Pd and Pd alloys. Dense TiN membrane is highly selective and can separate high-purity hydrogen. The porous alumina has a high permeation rate but low selectivity; therefore, separating high-purity hydrogen is difficult. To overcome this drawback, the two materials are combined as composite reclamations to produce a separation membrane with a high penetration rate and high selectivity. Accordingly, TiN-alumina was manufactured using a high-energy ball mill. The TiN-alumina membrane was characterized by X-ray diffraction analysis, scanning electron microscopy, and energy dispersive spectroscopy. The hydrogen permeability of the TiN-alumina membrane was estimated by a Sievert-type hydrogen permeation membrane apparatus. Due to the change in the diffusion mechanism, the transmittance value was lower than that of the general TiN ceramic separator.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.349-352
• /
• 2001

Shape separation method - a separation process which utilizes the fact that particles of different shape behave differently in force fields- is regarded as an useful measure for recycling, mineral processing, upgrading powdered material and so on. In this study, a trial was given to shape separation method using fluid field to recover pure diatom skeleton - which is thought to have many uses in itself and potential for various applications -from low grade diatomaceous earth of southeastern part of the Korean Peninsula. The striking difference of shape between diatom skeleton and other minerals like clay and quartz made it natural to choose shape separation method. Considering the size of particles to be separated, among many possible methods of shape separation, hydrodynamic field using hydrocyclone was adopted. And it resulted in recovery of pure diatom skeleton with high purity

• Resources Recycling
• /
• v.30 no.6
• /
• pp.76-82
• /
• 2021

The separation of palladium from crude metal, which is obtained from electronic waste using pyrometallurgy was achieved through electrolysis. This was done to recover high-purity copper. The oxidation potentials of these metals are a fundamental part of the analysis of electrolytic separation of palladium and impurity metals. To achieve this, copper, iron, and nickel were dissolved in the electrolyte, and palladium and aluminum were found to be recoverable from anode slime. During the electrolysis for palladium separation, palladium was present in the anode slime and was obtained with a recovery of 97.46 % indicating almost no loss. 4N-grade copper was recovered from the electrodeposition layer at the cathode.

• Resources Recycling
• /
• v.12 no.2
• /
• pp.45-53
• /
• 2003

In 2001, Korea produced a total of 4.91 million metric tons of fly ash, approximately 63.3% of which was recycled. Almost all of the recycled fly ash are used in concrete mixtures and cement industry. Therefore, in order to develop a new usage to increase the utilization of the fly ash, conductive induction was used in this research rather than triboelectrostatic. By applying conductive induction, we could verify the possibility of obtaining high purity fly ash below 1%LOI and high carbon fly ash over 70%LOI from raw fly ash. In this test, the potential difference between the two electrodes was conducted by changing the range of 8 to 16 kV.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.3-12
• /
• 2010

Platinum group metals with high purity are important raw materials for high technology industry. Since there are no domestic ores containing PGMs, it is of importance to develop a separation process by which ultra pure PGMs can be recovered from diverse spent resources. Data on the chemical properties and dissolution behavior of PGMs were obtained from the literature. A method for the thermodynamic analysis of the HCl solution with chlorine gas was introduced. Utilizing the difference in the chemical properties and dissolution behavior of PGMs would lead to an efficient separation process to recover ultra pure PGMs.

• Membrane and Water Treatment
• /
• v.10 no.2
• /
• pp.127-137
• /
• 2019

The D2EHPA/TBP co-extractants immobilized PolyHIPE membrane can be used for the selective separation of Mn (II) from Co (II). By solvent-nonsolvent method, D2EHPA/TBP co-extractants can be effectively immobilized into PolyHIPE membrane. The pore structure of PolyHIPE membrane and the presence of TBP enhance the stability of immobilized co-extractants. The optimal operating conditions for the separation of Mn (II) and Co (II) are feeding phase at pH 5.5, sulfuric acid concentration in the stripping phase of about 50 g/L and stirring speed at 400 rpm. The D2EHPA/TBP co-extractants ratio of 5:1 shows synergetic effect on Mn/Co separation factor about 22.74. The removal rate and recovery rate of Mn (II) is about 98.4 and 97.1%, respectively, while for Co (II) the transport efficiency is insignificant. The kinetic study of Mn (II) transport shows that high initial flux, $J_f^o=80.1({\mu}mol/m^2s)$, and maxima stripping flux, $J_s^{max}=20.8({\mu}mol/m^2s)$, can be achieved with D2EHPA/TBP co-extractants immobilized PolyHIPE membrane. The stability and reusability study shows that the membrane can maintain a long term performance with high efficiency. High purity of Co (II) and Mn (II) can be recovered from the feeding phase and stripping phase, respectively.

• Clean Technology
• /
• v.21 no.4
• /
• pp.217-223
• /
• 2015

In the present study, modelling and optimization of ethanol-n-heptane separation process were performed using pressure-swing distillation. The pressure-swing distillation process optimization was performed to obtain high purity ethanol and high purity n-heptane into a low-high pressure columns configuration and a high-low pressure columns configuration. The results of pressure-swing distillation process simulation and optimization using high-low pressure column configuration showed a reduced total reboiler heat duty at 5.8% which confirmed a more economical energy consumption.

• KSBB Journal
• /
• v.26 no.4
• /
• pp.323-327
• /
• 2011

The convenient derivatization method of chiral amino alcohols as 9-anthraldimine Schiff base derivatives for chiral resolution was developed and the liquid chromatographic enantiomer separation of chiral amino alcohols as 9-anthraldimine derivatives was investigated on several coated and covalently bonded polysaccharide-derived chiral stationary phases (CSPs). In general, the performance of Chiralcel OD-H (or Chiralcel OD) (${\alpha}$ = 1.24-2.89), the coated CSP derived from cellulose derivative was superior to the other CSPs for resolution of 9-anthraldimine derivatives of several amino alcohols. The results of enantioseparation depending on the structure of 9-anthraldimine analytes like the steric bulky group and the polar moiety etc were discussed. The analytical method was applied to measure the enantiomeric purity of commercially available chiral amino alcohols. It is expected that the convenient analytical method will be very efficient for determination of enantiomeric purity of amino alcohols as 9-anthraldimine Schiff base derivatives with strong UV absorption.