• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.526-534
• /
• 2009

This paper introduces the electronic ballast for high pressure sodium (HPS) lamps which provides power regulation during the whole lamp life without using a closed-loop power control system, in spite of large variations of lamp characteristics resulting from lamp aging. The structure of the electronic ballast and the parameters of HPS lamps are described. A mathematical model for the ballast is developed and used for the design and analysis of the ballast. A design procedure is presented to design the ballast which provides intrinsic power regulation over the whole lamp life. To improve the technical specifications of the ballast, the practical and standard constraints are considered in the design. According to the design procedure, an electronic ballast for 250-W HPS lamps is designed. All theoretical analyses are verified with the help of a semi-industrial experimental setup. The results validate that the designed ballast provides power regulation during the whole lamp life.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.237-240
• /
• 2006

In this paper, a new design using a simulation method was proposed. And to estimate its validity, various electronic and optical data were measured after making a 150[W] electronic ballast for high pressure sodium lamps. Using PSpice 9.1, the best solutions of various parameters such as the resonant frequency, the lamp output voltage, and the current of the electronic ballast were obtained. The power factor of the system was 99.8[%], the crest factor 1.44, the THD 4.99[%], and the weight 0.5[kg]. These are very good characteristics compared with a conventional HPS Lamp ballast.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.20 no.1
• /
• pp.75-83
• /
• 2024

In this study, high temperature design and integrity evaluation methodology have been developed for Type 316L stainless steel air-to-sodium heat exchanger which uses 700℃ sodium as coolant. Currently the only design rules that take creep effects into consideration explicitly for the 316L stainless steel subjected to high temperature in the creep range are French RCC-MRx, where elevated temperature designs are possible around 550℃. Absent design coefficients at high temperature were determined based on the material properties newly determined in previous studies, and high-temperature design evaluation methodologies were developed based on 3D finite element analyses on the 700℃ class heat exchanger. In addition, works were conducted on the web-based design evaluation program of HITEP_RCC-MRx including incorporation of material properties and design coefficients up to 700℃. Methodologies on high temperature design evaluations on Type 316L stainless steel high-temperature heat exchanger were suggested.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.10
• /
• pp.1484-1489
• /
• 2006

This study was carried out to investigate the effect of high pressure and the addition of non-meat proteins on the physico-chemical and binding properties of restructured pork. Pressurizations were carried out at up to 200 MPa and non-meat proteins used as a binder were isolated soy protein (ISP), sodium caseinate (SC), whey protein concentrate (WPC) and egg white powder (EWP). The pH values of all treatments were affected by the level of pressure. $L^*$-value of all treatments increased significantly (p<0.05), while both $a^*$-value and $b^*$-value of all treatments showed a significant decrease (p<0.05) with increasing pressure level. Binders could contribute only additive effects on both pH and color of the treatments. It was found that high pressure improved the water binding capacities and binding strength of the treatments. Binders also improved the binding strength of restructured pork. However, SC and WPC had no effect on water binding properties under high pressure. These results indicate that the application of high pressure had more significant effect on restructuring meat than binders.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.66-71
• /
• 2004

When waterlogged wood dries up, it shrinks largely. And it is hard to recover original shape. Therefore it happens to lose the value of wood remains frequently. This paper studied how far dried waterlogged wood can recover original shape. Shape recovering course and extent are thoroughly investigated after waterlogged wood of Pinus densiflora, Quercus serrata and Styrax japonica oven-dries and instills varieties of test solution. At 1- step, oven-dried samples infiltrated by chlorous acid sodium or sodium hydroxide solution. At 2- step, wood tissues of samples were swelled by the fast decompression after infiltrating $CO_2-supercritical$ fluid at high pressure. The study investigated the possibility of shape recovering in waterlogged wood. Shape recovering rate is different with solution and wood species. Sample of sodium hydroxide solution doesn't swell anymore when using $CO_2-supercritical$ fluid. In general, the sample of sodium hydroxide solution has higher Shape recovering rate than $CO_2-supercritical$ fluid solution treated by chlorous acid sodium.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.4
• /
• pp.890-894
• /
• 1999

Microencapsulation of anchovy oil as a core material in sodium alginate as a wall material was inves tigated. Microencapsulation was accomplished by injecting an oil/water emulsion, consisting of a mixture of liquefied sodium alginate and emulsifier, under high pressure through an orifice submerged in a calcium lactate solution. Microcapsules suspended in a dispersion fluid were observed under a fluorescence mi croscope to verify the presence of the capsules and to note coalescence or degradation of the capsules. Optimum conditions for microencapsulation of anchovy oil were obtained when 1.0% aqueous solution of sodium alginate contained 3% of a 1:1 ratio of ESPR 25(polyglycerine＋polylinoleate) and TW 20(sorbitan laurate＋ethylene oxide) as an emulsifier in terms of capsule size and size distribution, and emulsion stability. The airless sprayer produced microcapsules with a diameter between 15.9 and 73.9 m with different concentration of a wall material. The optimum mixing ratio of wall material to core material was 90:10(wt/wt). 0.2% calcium lactate was appropriate as a dispersion fluid.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.65-73
• /
• 1989

Steam explosion process is an efficient pretreatment method for sparating and utilizing wood main components has attracted attention in utilization of ligno-cellulosic biomass. In order to obtain the effective pretreatment condition. this study was made explosion apparatus. examined the composition. extraction of exploded wood. Wood chips of pine(Pinus densiflora oak (Quercus serrata) and birch wood (Belula platyphylla var. japonica) were treated with a high pressure steam(20-30 kg/$cm^2$, 2-6 minutes). The results can be summarized as follow; In analysis of exploded wood(EXW). It was found arabinose residues rapidly decreased with increasing of steaming time and pressure. Extractives of EXW with sodium hydroxide increased with increasing of steaming-time and- pressure especially extractives 1% sodium hydroxide has higher than other extracted method extractives of hard wood(oak, birch) has higher than pine wood. In EXW extracted with sodium hydroxide and methanol lignin was partially delignified alkali extraction was more delignified than methanol extraction hardwood than pine wood.

• Journal of Nutrition and Health
• /
• v.26 no.5
• /
• pp.625-638
• /
• 1993

The purpose of this study was to observe the relationship of dietary factors to blood pressure in 5th and 6th grade school children. Salt threshold, salt preference and nutrition knowlege about blood pressure were tested. Twenty-four hour urines were collected for the measurements of the volume and concentrations of sodium, potassium, chloride, calcium, phosphorus, creatinine and urea nitrogen. 1) Mean systolic and diastolic blood pressure of elementary school children were 106.8/67.6mmHg in males and 108.7/69.5mmHg in females. Seven children(4%) of total subjects were found to be hypertensive. Their mean blood pressure was 130.0/86.4mmHg. 2) Urinary excretions of creatinine and urea nitrogen during twenty-four hours were 621.1mg and 1524mg, respectively. The mean daily urinary sodium excretion was 2940mg, which is equivalent to 7.37g NaCl. 3) The daily urinary excretions of other minerals were as follows; potassium was 1301mg, chloride, 4991mg, calcium, 55.7mg and phosphorus, 700.03mg. 4) Salt preference of hypertensive children90.473$\pm$0.275) was significantly higher than those of normotensive children(0.473$\pm$0.213%), but salt threshold was lower in hypertensives(0.105$\pm$0.04%) than normotensives(0.081$\pm$0.022%) (p<0.05). INdices for assessing obesity, such as body weight, triceps skinfold, weight for heigth and body surface area, were high in hypertensive children than normotensive children(p<0.05). But there was no significant difference in energy and nutrient intakes between two groups. 5) Various anthropometric measurements had positive correlations with blood pressure, but body muscle mass(%) had a negative correlation with blood pressure. And daily energy and nutrient intakes were not related to blood pressure. 6) Blood pressures-both systolic and diastolic-were significantly correlated with urinary excretions of potassium and chloride. Daily sodium excretion was related to systolic blood pressure, but no related to diastolci blood pressure. There was no relationship of salt threshold to salt preference, and neither threshold nor preference was related to blood pressure. Results of this study suggest that nutrition education program for children including the information about desirable food habits for the prevention of hypertension should be developed.

• The Journal of the Petrological Society of Korea
• /
• v.3 no.1
• /
• pp.34-40
• /
• 1994

High pressure X-ray diffraction study was carried out on a graphite to investigate its compressibility as well as any possible phase transition to the hexagonal diamond structure at room temperature. Energy dispersive X-ray diffraction method was introduced using a Mao-Bell type diamond anvil cell with Synchrotron Radiation. Polycrystalline sodium chloride was compressed together with graphite for the high pressure determinations. Because of the poor resolution of the X-ray diffraction pattern of graphite, its compressibility was estimated to be almost same as that of NaCl by graphite (002) X-ray diffraction peak only. An observation of any new peak from a possible hexagonal diamond phase seems very unplausible for its definite identification based on the present data. Alternative approaches such as an Wiggler Radiation source as well as a Large Volume high pressure apparatus will be necessary for the detailed studies on a graphite in future.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.88-95
• /
• 1997

High pressure X-ray diffraction study was carried out on a polycrystalline graphite to investigate the phase transition(s) at room temperature. Energy dispersive X-ray diffraction method was employed using a Mao-Bell type diamond anvil cell with an Wiggler synchrotron Radiation at the National Synchrotron Light Source. Sodium chloride power was used as the internal pressure sensor for the high pressure determinations as well as the pressure medium for quasihydrostatic pressure environment. Graphite transforms into a hexagonal didose not agree with the previously reported observations and this phase persists when pressure is released down to 0.1 MPa. This result dose not agree with the previously reported observations and this discrepancy would be due to the kinetics in phase transition as well as the uniaxially oriented pressure field in the diamond anvil cell.