• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.10a
• /
• pp.180-192
• /
• 1998

One of the conventional gas burners has nowadays been used for ladle preheating. As a ladle is one of the open-type furnaces, however, it causes to consume much fuel because of high temperature of exhaust gas from the ladle and the exhaust gas passing through ladle cover makes it worsen a working environment nearby. Therefore, the objective of this study is to develop the recuperative burner system applying for an existing teeming ladle , which is integrated with burner, recuperator and eductor as one of the new type combustion equipments and has many advantages of simple installation, compactness and easy control, especially a great deal of energy saving through the waste heat recovery from exhaust gas. The contents of the study is to design, manufacture of recuperative burner system and to perform its tests experimentally after applying to the teeming ladle in the capacity of 100 ton. Its heat release rate is 1,700,000 kcal/h with COG(Cokes Oven Gas) as fuel gas. The test items are the temperature distribution inside the ladle and the preheated air temperature change depending upon the exhaust gas. Nox, exhaust gas analysis and noise.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.43-50
• /
• 2016

Purpose: The present study is aimed at examining the drying characteristics of sea tangle through a combination of microwave and far-infrared drying experiment and finding the optimal drying conditions. Methods: Sea tangle was cleaned and cut into fine pieces (5mm) before they were subjected to combinational drying by microwave and far-infrared ray. The amount of specimen per drying is 2 kg. The finely cut pieces of sea tangle were preheated in a microwave dryer for three different lengths of time (10, 15, and 20 min). Subsequently, they were dried using a far-infrared dryer at tow temperatures ($90^{\circ}C$ and $100^{\circ}C$) at an air velocity of 0.8 m/s until the final moisture content reduced to 10%. Results: Sea tangle dried under the condition of 20 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. Of the drying models verified in this study, the logarithmic model showed high accuracy with the coefficient of determination $R^2>0.7825$ and RMSE<0.1095. The rehydration ratio of sea tangle was the highest (12.87 g water/g dry matter) under the condition of 15 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. The energy consumption for the combination of microwave and far-infrared drying was the lowest (4.78 kJ/kg water) under the condition of 20 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. Conclusions: Considering the drying time, discoloration during drying, rehydration ratio, and energy consumption for the drying of sea tangle, the optimal drying conditions for high-quality sea tangle are 15 min of preheating in a microwave dryer and drying at $100^{\circ}C$ by a far-infrared dryer.