• 대한물리치료과학회지
• /
• 제10권1호
• /
• pp.198-205
• /
• 2003

We evaluated the effect of low power GaAsAl laser on re-epithelization in full-thickness excisional wound of rat skin. Two full-thickness excisions were made on the back of the experimental animals. Low power laser applications with 10mW intensity were treated experimental animals twice a day for 7 days. On the seventh postoperative day the quantitative analysis of re-epithelization was performed using immunohistochemical staining for proliferating cell nuclear antigen (PCNA). The majority of PCNA immunoreactive cells was observed at epithelial cells in the margin of full thickness excisional wound. The low power laser treatments significantly increased the number of PCNA immunoreactive cell as compared to that of non treated animal group (p<0.01). The shape of PCNA immunoreactive cell appeared as small dark, round to ovoid structures. Most PCNA immunoreactive cells exhibited a high intensity of staining that contrasted sharply with the surrounding background. In conclusion, these findings suggest that GaAlAs laser treatments effectively enhance the epithelial wound healing by the stimulating cell proliferation. Furthermore, the majority of cell proliferation occurred in the margin of full thickness excisional wound.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.66-71
• /
• 2000

Laser induced surface hardening of Tool steel(STC5) can be achieved either with or without surface melting. In trans-formation hardening as the surface is heated to a temperature below its melting point and is rapidly cooled solidified microstructures are usually much finer and stronger than those of the base matals. For this reason surface modification of tool steel by YAG laser irradiation has been studied as a function of processing parameters such as power density pulse width defocusing distance and molten depth. The high energy density changes and refines the microstructure of the near surface layer. In the case of beam passes martensite formed in the melt zone exhibited very high vickers hardness values. Molten depth and width depend on defocusing distance and energy of black color painting is more absorptive than other color painting.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1393-1397
• /
• 2009

A high-speed wavelength swept laser, which is based on oscillation characteristics of a fiber Fabry-Perot tunable filter, is described. The laser is constructed by using a semiconductor optical amplifier, a fiber Fabry-Perot tunable filter, and 3.348 km fiber ring cavity. The wavelength sweeps are repeatatively generated with the repetition period of 61 kHz which is the first parallel oscillation frequency of the Fabry-Perot tunable filter for the low power consumption. Mode-locking is implemented by 3.348 km fiber ring cavity for matching the fundamental of cavity roundtrip time to the sweep period. The wavelength tuning range of the laser is 87 nm(FWHM) and the average output power is 1.284 mW.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.121-121
• /
• 2013

최근 산업에서 이슈화되고 있는 고출력산업용레이저를 위한 반도체다이오드레이저 기술에 대한 산업적 관점을 소개하고자 한다. 열효율이 높고 및 비접촉 제어가 가능한 고출력다이오드에 대한 전반적인 소개와 함께, 왜 각광을 받고 있는지를 진단하며, 이러한 고출력레이저다이오드를 제작하는 방법에 관한 고찰을 하고자 한다. 특히 박막생성기술을 위한 장비 기술에 대해 소개하며, MBE와 MOCVD에 대해 비교하고자 한다. 실제적인 고출력레이저 다이오드제작을 위한 측정 및 신뢰성 기술에 대해서 소개하며, 한국광기술원에서 수행하고 있는 산업용 레이저 핵심부품 모듈 국산화 기반구축사업에 대한 소개를 하고자 한다. 한국광기술원 레이저 개발 내용 중 고출력다이오드레이저 개발을 위한 장비 소개 및 기술 소개를 하고자 한다.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.644-650
• /
• 2012

This paper show the 2kW fiber laser cutting properties of SS400. The study was comparison of traditional 4kW $CO_2$ Laser cutting and 2kW Fiber laser cutting characteristics for the application of Industrial 2D Laser Cutting Machine. The laser used in this investigation was an IPG YLU-2000 multi-mode Ytterbium Fiber machine with a maximum power of 2000W and a wave length of 1070 nm. The laser was used in its Continuous Wave (CW) mode with an approximately top hat beam intensity distribution. Fiber laser high quality cuts at a large range of speeds (ranging from 2000 to 3800 mm/min) which has been obtained for the 2.3mm Sheet of SS400. 2kW power Fiber laser cut was able to max. 20mm sheets of SS400 (speed range from 650 to 850 mm/min). Fiber laser cutting used in conventional hole nozzle could cut 12mm SS400 but used in special dual cutting nozzle could cut 20mm SS400.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.66-71
• /
• 2004

Airborne contaminant particles are intruded into optical disk drive(ODD) due to the flow caused by disk rotation and can be adhered to objective lens, which causes read/write errors. Such a phenomenon can be a serious problem for high-density storage devices. The purpose of this paper is to understand the effect of particle contamination of objective lens in a CD-ROM drive on laser diode power and photo diode RF signal. The measurements of laser power and readout RF signal were carried out by using a laser power meter and a time interval analyzer, respectively. The parameters for estimating a readout-signal' distortion were its jitter and amplitude. Alumina(Al$_2$O$_3$) particles were used as test dust particles. The results show that the failure for data access happened as the degree of lens contamination was greater than 20％.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.94-96
• /
• 2005

Welding process of ultra thin stainless steel foil was investigated using a single mode Yb-fiber laser with a CW maximum output power 40W. In micro welding, critical power density for keyhole welding was 1 to 2 orders larger higher than in macro-welding due to larger thermal conduction, extremely high speed welding becomes possible.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1992년도 특별강연 및 추계학술발표 개요집
• /
• pp.21-31
• /
• 1992

CO2 laser had enabled accurate and effective cutting. But its application has been limited to thin and small parts. Development of a high power oscillator and oscillator built-in cutting machine have realized cutting of thick and large steel parts. This machine brings also possibility of fully automated cutting systems to practical steel parts such as for construction machinery.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.1-12
• /
• 1992

본 연구에서는 가공기 자체의 파라메터와 성능에 관한 연구로서 출력 에너지 가 서로 다른 가공기를 사용하여 SUS 304 스테인리스 시험편을 관통, 절단하면서 출력 에너지와 최대 출력을 비교하여 보고, 시험편 관통시 주파수와 출력 에너지와의 관계, 시험편 관통시 응융 금속 제거량에 의한 절단 속도의 예측, 서로 다른 출력의 가공에 있어서 슬릿 절단 폭, 커프 폭, 드로스 길이, 절단면의 표면 거칠기 등을 비교하여 출 력차에 따른 가공 특성을 고찰하였다.

• 한국광학회지
• /
• 제35권2호
• /
• pp.49-60
• /
• 2024

본 연구에서는 킬로와트 급 고출력 레이저의 대기 전파 시뮬레이션에 필요한 위상판의 개수를 분석하였다. 킬로와트 급 레이저가 대기 중에 전파될 때, 주로 대기 난류와 열적 블루밍 효과에 영향을 받는다. 이에 따라 split step 방법을 사용하여 대기의 흡수 및 산란에 의한 손실, 그리고 난류와 열적 블루밍으로 인한 빔의 왜곡 현상을 구현할 때, 위상판의 개수는 시뮬레이션의 정확성 및 소요 시간을 결정짓는 중요한 요소이다. 본 연구에서는 광범위한 대기 난류 조건에서 많은 수의 위상판(예: 150개)을 사용하여 시뮬레이션을 진행하고, 레이저 출력 밀도 2.5×10⁶ W/m² (50 cm 직경 레이저 빔의 경우 500 kW 출력) 미만의 고출력 레이저 빔 전파 시뮬레이션에 필요한 위상판 개수에 대한 새로운 가이드 라인을 제시한다.