• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.2
• /
• pp.123-128
• /
• 2016

In this paper, an inversely tapered coupler with Bragg reflectors is reported for the first time. With appropriately positioned reflecting structures, our fiber-to-chip coupler can more efficiently transmit the light from fiber to a waveguide in a photonic integrated circuit (PIC). A numerical simulation evaluated the coupler's efficiency with the reflector. Optimized parameters that maximize the efficiency of the coupler are also investigated. Simulation results show that the reflector with appropriate parameters enhances efficiency by up to 7 dB. Likewise, Bragg metal reflectors implemented by the conventional metallization process can also improve efficiency. It is also shown that the proposed reflector enhances the coupling efficiency in a double-tip taper coupler.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.1
• /
• pp.108-118
• /
• 1996

This paper presents automatic reentry of a deepsea reser by adaptive control. Reentry is one of the major pro blems regarding a deepsea riser. In the reentry operation, the lower end of riser must be accurately positioned over the tarket point on the seabed. But the deepsea riser shows complex elastic response due to flexibility and nonlinearity of the riser dynamics and the required positioning accuracy is high. Moreover, elastic deformation must by controlled for securing structural integrity. In adaptive control, uncertainly known parameters like added mass and drag coefficient in the riser dynamics are identified and control forces at the floating body and the riser are calculated simultaneously. An Adaptive algorithm for MIMO linear discrete time system without requiring a persistent excitation is adopted in this study. The effectiveness of adaptive control logic is tested by numerical simulation and model experiment. The designed control system shows good overall performances, so that the present study can be applied to the control of the deepsea riser.

• Journal of KSNVE
• /
• v.7 no.2
• /
• pp.261-272
• /
• 1997

Recently washing machines are to be in lower vibration and lower sound because of better environment. Vibration problems in washing machines occur in both washing mode and spinning mode, but vibration in spinning mode becomes main problem because of its high rotating speed and continuity. Vibration while spinning is mainly due to rigid body motion of total washing system which includes suspending rods, washing bath, spinning bath, and gear sets. In this study, some researches were done in order to analyze the rigid body motion of washing system and flexible vibration of spinning bath. A basic mathematical model was established, and the effect of position of salt water and shape change of salt water case were considered. And the effect of lengths of suspending rods, attaching angles, vertical and horizontal position, stiffness of spring on the change of vibration were also considered. To identify the effect of salt water on vibration, some measurements were done. When salt water was positioned at upper part, the effect was most and this coincides with the tendency of simulation.

• Journal of Information Technology Services
• /
• v.12 no.2
• /
• pp.85-101
• /
• 2013

The wide spread of smartphones and the growth of the number of internet users are reshaping the SNS (Social Network Service). Merging into other service areas and creating new business models with high profits, SNS is no more a service simply providing personal connections. Now SNS has positioned itself as a service platform. SNG (Social Network Game) is a new outcome utilizing SNS as a game platform and showing a rapid growth rate in a short period of time. The number of SNG users is expected to increase steadily. In this study, we examine whether SNG user motivations lead to flow experience and future intention to use. For that purpose, we conducted a survey with smartphone users. The results indicate that flow experience functions as a mediator and user motivations indirectly affect intention to use through flow experience. This paper concludes with discussions on findings and suggestions for future research.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.7
• /
• pp.465-472
• /
• 2004

Analog CPPN-based optimal road boundary detection algorithm for autonomous vehicle is proposed. The CPPN is a massively connected analog parallel array processor. In the paper, the dynamic programming which is an efficient algorithm to find the optimal path is implemented with the CPPN algorithm. If the image of road-boundary information is utilized as an inter-cell distance, and goals and start lines are positioned at the top and the bottom of the image, respectively, the optimal path finding algorithm can be exploited for optimal road boundary detection. By virtue of the parallel and analog processing of the CPPN and the optimal solution of the dynamic programming, the proposed road boundary detection algorithm is expected to have very high speed and robust processing if it is implemented into circuits. The proposed road boundary algorithm is described and simulation results are reported.

• Ocean Systems Engineering
• /
• v.7 no.4
• /
• pp.345-369
• /
• 2017

The ocean environment offshore West Africa is considered to be mild. However, the generated swell from distant North and South Atlantic during austral winter and summer can reach high wave amplitudes with relatively low wave periods or low wave amplitudes with long wave periods, the later can be a crucial scenario to consider when the assessment of vessel resonance is of importance. Most offshore operations, which include offshore drilling, and installation in West Africa, are carried out from floating systems. The response of these systems and performance are governed by characteristics, such as amplitude and frequency of the wave and swell seas. It is therefore important to fully understand the sea conditions offshore Nigeria. This study covers the description of the swell sea offshore Nigeria using Bonga offshore wave measurements collected from the directional wave-rider (DWR), positioned at the Bonga site off the coast of Nigeria.

• Journal of Information Technology Services
• /
• v.7 no.1
• /
• pp.45-62
• /
• 2008

This review examines the rapid growth of qualitative and quantitative of telecommunication industry for past couple of years from customer's viewpoint. Most of the telecommunication products were positioned in the market by the businesses and government's support, but the entity of telecommunication products were never interpreted from the user's viewpoint. Even though, various kinds of telecommunication services have been actively discussed by businesses, government, and IT professionals, it has not been sufficiently discussed by the marketing academia where they need to focus a lot on customer's utility. For the purpose of providing an insight of the telecommunication service marketing strategy, this study looked over old and new directions of growth, failure and evolution of services by focusing on two main pillar of communication business, which is high-speed internet and mobile phone service. Additionally, the research explains and mentions the limit and trend of the telecommunication service marketing, and the future research task that needs to be solved.

• International Journal of Advanced Culture Technology
• /
• v.11 no.1
• /
• pp.395-402
• /
• 2023

The implementation of a hybrid network utilizing Power Line Communication (PLC) and Wi-Fi technologies has been demonstrated to improve signal strength and coverage in areas with poor connectivity due to internet shadow areas. In this study we strategically positioned Wi-Fi relays and utilized the capabilities of PLC technology to significantly improve signal strength and coverage in areas with poor connectivity. We also analyzed the effects of metallic obstacles on Wi-Fi signal propagation and proposed a solution to strengthen the signal enough to pass through them. Our experiment demonstrated the feasibility and potential of using this hybrid network in industrial scenarios for real-time data transmission. Overall, the results suggest that the use of PLC and Wi-Fi hybrid networks can be a cost-effective and efficient solution for overcoming internet connectivity challenges and has the potential to provide high-speed internet access to areas with unreliable signals.

• Corrosion Science and Technology
• /
• v.21 no.5
• /
• pp.418-421
• /
• 2022

Stir-accelerated corrosion test of a high chromium cast iron was attempted in 0.1 mol dm^-3 H₂SO₄ + 0.05 mol dm^-3 HCl + 10 wt% SiC solution for 48 h at room temperature or at 45 ℃. The high chromium cast iron was composed of 2.8 wt% C and 27 wt% Cr and balanced with Fe. The high chromium cast iron was positioned into a 500 mL beaker with stirring of the solution at 1050 rpm using a magnetic hot plate. The corrosion rate was increased by agitating the solution. In addition, the corroded depth of the high chromium cast iron surface was increased by agitating the solution. The surface morphology of the high chromium cast iron after the stir-accelerated corrosion test revealed that a dendritic austenite phase partially remained in the corroded region after agitating the solution, indicating that solution movement during agitating could accelerate the corrosion rate of the high chromium cast iron.

• Journal of Digital Contents Society
• /
• v.9 no.1
• /
• pp.87-99
• /
• 2008

High Altitude Platform network systems utilize Unmanned Aerial Vehicle as routers for ground node communication. For this purpose, geographical clustering of ground nodes must be required. In this paper, we assume mobile ground nodes over wide area and the clusters composed of ground nodes are identified. UAVs can be positioned at the point of centroid of clusters. The number of UAVs are derived from the area size and the number of ground nodes deployed in that area. From the simulation and application of clustering algorithms, we showed visual clustering results with dynamic variance of number of ground nodes.