• 대한방사선치료학회지
• /
• 제12권1호
• /
• pp.20-25
• /
• 2000

The accuracy of the target localization was evaluated by conventional and spiral CT in stereotactic radiosurgerv. Conventional and spiral CT images were obtained with geometrical phantom, which was designed to produce exact three-dimensional coordinates of several objects within 0.1mm error range. Geometrical phantom was attached by BRW headframe, intermediate head ring, and CT localizer. Twentv-seven slices of conventional CT image were scanned at 3 mm slice thickness. Spiral CT images were scanned at 3 mm slice thickness from the pitch value 1 to 3, and twenty-seven slices of image were obtained per each the pitch value. These CT images were transferred to a treatment planning system(X-knife, Radionics) by ethernet, Three-dimensional coordinates of these images measured from the treatment planning system were compared to known values of geometrical phantom. The mean localization error of the target localization of conventional CT was 1.4mm. In case of spiral CT, the error of the target localization was within 1.6mm from the pitch value 1 to 1.3, but was more than 30mm above the pitch value 1.5. In conclusion, as the localization error of spiral CT was increased in high pitch value compared to conventional CT, the application of spiral CT will be with caution in stereotactic radiosurgery.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.961-963
• /
• 2002

When high temperature superconducting(HTS) tapes are wound on former for HTS cable application, their critical characteristics are likely to be degraded seriously because of mechanical stress. In this study, prior to fabricate prototype HTS cables, we investigated the variation of critical characteristics of HTS tapes according to their pitch angles. For this work, we prepared the samples of HTS tapes on the former of which diameter is 3cm. Pitch angles of HTS tapes are $0^{\circ}$, $00^{\circ}$, $20^{\circ}$, $30^{\circ}$, $40^{\circ}$, respectively. We applied current up to 160 $A_{rms}$ to HTS tapes and investigated E-I characteristics. The critical current of HTS tapes was decreased as pitch angle increased. In addition, when the applied current was beyond their critical current, the rate of resistance increase of HTS tapes was in proportion to their critical current. Finally, We concluded that the pitch angles affected resistance increase of HTS tapes as well as critical current.

• 한국항공우주학회지
• /
• 제43권7호
• /
• pp.648-656
• /
• 2015

능동 합성개구레이더 위성의 주요기동은 SAR 안테나 방향을 바꾸기 위한 롤축 기동이다. 그리고 도플러 중심주파수 변화를 최소화하기 위하여 요축 기동이 요구된다. 따라서 토크/모멘텀 용량을 대부분 롤축으로 그 다음으로 요축으로 할당하는 것이 합리적이다. 하지만 궤도 조정 때문에 가끔씩 피치축으로 중심으로 큰 각도의 회전이 요구된다. 본 논문에서는 롤축과 요축의 연속회전을 통한 피치축 기동시간 단축 방법에 대해서 살펴본다. 이들 두 축이 피치축에 비해서 기동성능이 좋기 때문에, 피치축을 중심으로 큰 회전이 요구될 때는 기동시간 단축이 가능하다.

• 응용통계연구
• /
• 제33권2호
• /
• pp.171-184
• /
• 2020

미국 메이저리그 야구 경기는 야구공을 추적하는 3대의 고속 카메라를 통해 모든 투구에 대한 궤적 데이터 PITCHf/x를 수집하고 공개한다. 선행 연구에서는 PITCHf/x 데이터를 통해 각 투구의 기대 피루타수를 계산하고 이를 토대로 투구의 질을 평가했다. 다만 기대 피루타수는 경기 득점으로 매번 이어지지 않기 때문에 각 투구가 승리에 기여하는 영향을 직접적으로 평가하지 못한다. 이 논문에서는 득점 기댓값과 득점 가치의 개념을 조합해 투구에 대한 기대 득점 가치를 계산하고 이를 통해 투구의 질을 랜덤 포레스트 모형으로 평가한 뒤, 기대 피루타수를 이용한 투구의 질 평가와 비교 분석한다.

• 한국음향학회지
• /
• 제13권3호
• /
• pp.33-40
• /
• 1994

부호여기된 선형예측(CELP) 음성부호화기는 4.8 kbps 이하의 낮은 전송 비율에서도 좋은 성능을 갖는다. CELP형 부호기의 단점은 많은 계산량을 필요로 한다는 것이다. 본 논문에서, 우리는 복잡성을 줄이면서 CELP 보코더의 음질을 유지하는 새로운 피치 검색법을 제안하였다. 이것은 음성 파형의 자기상관계를 간단한 전처리관계식에 의해 사전에 파악하여 필요한 구간에 대해서만 피치검색을 수행하는 방법이다. 제안한 방법은 피치검색에서 기존의 방법에 비해 약 $77\%$의 복잡성이 감소되었다.

• Design & Manufacturing
• /
• 제8권2호
• /
• pp.1-6
• /
• 2014

The narrow-pitched connectors are of interest for small-scale devices such as smart phones because of theirs caling. We conducted an injection molding analysis and a warp analysis for 0.3mm and 0.5mm pitch FPC connectors. We obtained a volumetric shrinkage of 4.344%, a clamping force of 0.2529 tonne, a maximum injection pressure of 76.3 MPa as optimized molding conditions for the 0.3mm pitch FPC connector. We found that, compared with the traditional injection molding technique, the injection molding for narrow-pitched connectors comes with distinct features like low clamping force, high injection molding pressure, and narrow gate size. Adding to the optimization analysis, the deflection of 0.5mm pitch FPC connector was analyzed as well. A maximum deflection of 0.053mm was calculated, which the actual deflection of 0.062mm was compared to. The results deduced a relative error of 17%. We conclude that the deflection analysis along with the optimization analysis can be used as an effective tool to predict the behavior of narrow-pitch connectors although the relative error may need to improve.

• 한국태양에너지학회 논문집
• /
• 제32권5호
• /
• pp.31-40
• /
• 2012

This paper introduces a methodology for NREL 5MW wind turbine, which is the variable speed and variable pitch(VSVP) control system. This control strategy maximizes the power extraction capability from the wind in the low wind speed region and regulates the wind turbine power as the rated one for the high wind speed region. Also, pitch control efficiency is raised by using pitch scheduling.Torque schedule is made of torque table depending on the rotor speed. Torque control is used for vertical region in a torque-rotor speed chart. In addition to these, mechanical loads reduction using a drive train damper and exclusion zone on a torque schedule is tried. The NREL 5MW wind turbine control strategy is comprised by the generator torque and blade pitch control. Finally, proposed control system is verified through GH Bladed simulation.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2007년도 한국음성과학회 공동학술대회 발표논문집
• /
• pp.3-23
• /
• 2007

King Sejong the Great, his students in Jip-hyeun-jeon school and Choe Sejin, their successor of the sixteenth century, indicated Middle Korean had three distinctive pitches, low, high, and rising (phyeong-, geo-, sang-sheong). Thanks to $Hun-min-jeng-{\emptyset}eum$ as well as its Annotation and side-dots literatures in fifteenth and sixteenth centuries, we can compare Middle Korean with Hamgyeong dialect, Gyeongsang dialect, and extant tone dialects with joint preservers of what was probably the tonal system of unitary mother Korean language. What is most remarkable about middle Korean phonetic work is its manifest superiority in conception and execution as anything produced in the present day linguistic scholarship. But at this stage in linguistics, prior to the technology and equipment needed for the scientific analysis of sound waves, auditory description was the only possible frame for an accurate and systematic classification. And auditory phonetics still remains fundamental in pitch description, even though modern acoustic categories may supplement and supersede auditory ones in tonological analysis. Auditory phonetics, however, has serious shortcoming that its theory and practice are too subject to be developed into the present century science. With joint researchers, I am developping a new pitch scale. It is a semiautomatic auditory grade pitch analysis program. The result of our labor will give a significant breakthrough to upgrade our component in linguistics.

• 대한화학회지
• /
• 제8권3호
• /
• pp.98-102
• /
• 1964

As a practical method to produce the carbonaceous binder, the destructive distillation of coal tar has been studied. The optimum condition on binder in various temp. and cutting time were examined and the compositions of pitch were also examined in connection with ${\alpha},\;{\beta}\;and\;{\gamma}$ by solvent extraction. Coke powder was mixed with binder as treated pitch in the proportions of 77% of coke to 23% of pitch, to give a plastic mix which could then be pressed into molding. The properties of baked body after molding was tested. It was found that cutting of the coal tar at 350${\circ}C$, for 30 min., at 300${\circ}C$. for 1 hr., and at 250${\circ}C$. for 8 hrs. were good condition. Particularly, we found that the cutting of the coal tar obtained by destructive distillation at high temp. and in minimum period of time had shown the best condition for utilization of carbonaceous pitch as binder. The above mentioned cutting condition results in good quality of pitch which is available to be used as binder in carbon industry.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.863-871
• /
• 2013

Control of pitch angle of turbine blades is among the controlling methods in the wind turbines; this measure is taken for managing mechanical power generated by wind turbine in different wind velocities. Taking into account the high significance of the power generated by wind turbine and due to the fact that better performance of pitch angle is followed by better quality of turbine-generated power, it is therefore crucially important to optimize the performance of this controller. In the current paper, a PI controller is primarily used to control the pitch angle, and then another controller is designed and replaces PI controller through applying a new strategy i.e. alternating two ADALINE neural networks. According to simulation results, performance of controlling system improves in terms of response speed, response ripple, and ultimately, steady tracing error. The highly significant feature of the proposed intelligent controller is the considerable stability against variations of wind velocity and system parameters.