• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 1998.05a
• /
• pp.37-54
• /
• 1998

This study was conducted to investigate the effects of mugwort extracts on the blood ethanol concentration, liver function and low level of cadmuim(Cd) in rats. The effects of mugwort extracts on the blood ethanol concentration was studied in Sprague-Dawley rats (10 weeks old) administered p.o. with 25% ethanol (5g/1kg body weight) and then injected with mugwort extracts (at the 2% levels of daily feed consumption compared with the concentration of catechins level in mugwort extracts) in caudal vein. SD rats were divided into five groups : control group (CON-E, only ethanol and 0.85% saline sol'n treated instead of each extracts), water extracts of mugwort treated to the control (MDW-E), ethanol extracts of mugwort treated to the control (POH-E). And then rat plasma of each time (0hr, 1hr, 2hr, 3hr) was investigated ethanol concentration by gas chromatography. Another rats were measured at the time of 0 and 5hr for the test of GOD(Glutamic Oxaloacetic Transaminase) and GPT(Glutamic Pyruvic Transaminase). Components of each extracts were analyzed by using high performance liquid chromatography. The effects of mugwort extracts on the liver function were studied in culture of rat hepatocyte composed of three groups : Control group and two groups treated with each extracts (1% & 2% MDW, 1% & 2% MOH). Condition of rat hepatocytes cultured for 36hr at $37^{\circ}C$(5% $CO_2$ incubator), number of cells, GOT and GPT activity were investigated. The results obtained were summarized as follows ; 1. Catechins level of mugwort extracts was $8{\sim}10mg/100g(MDW)$, $3{\sim}4mg/100g(MOH)$ 2. The contents of (-)-Epigallocatechin was high in MDW 3. The effects of mugwort extracts on the blood ethanol concentration were as follows; 1) The order in ethanol degradation efficiency was MDW-E > MOH-E > CON-E. 2) Ethanol concentration significantly decreased (p<0.05) in MDW-E and MOH-E. 4. The effects of mugwort extracts on the liver function were as follows; (rat hepatocytes cultured for 36hr at $37^{\circ}C$) 1) Cells condition of MDW-L was better than other groups. 2) The order in number of cells (rat hepatocytes) was 2% MDW-L >1% MDW-L >1% MOH-L > Con-L > 2% MOH-L 5. Cd treatment increased concentrations of hepatic GSH level, and decreased GOT activity in plasma. Therefore, this results suggest that the effects of mugwort extracts may an important rols in degradation ethanol and recovery liver function in body. Also, Mugwort extracts may modify the toxicities of Cd in Cd-treated rats and play an important roles in preventing the liver from various toxicants including Cd in Cd treated rats.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.3
• /
• pp.62-82
• /
• 2019

Taking the three Wuyi-Gugok Drawings, 『A Picture Showing the Boundary Between Mountains and Rivers: A』, 『Landscape of the Jiuqu River in the Wuyi Mountain: B』 and 『Eighteen Sceneries of Wuyi Mountain: C』, which were produced in the mid-Qing Dynasty as the research objects and after investigating the names recorded in the paintings, this paper tries to analyze the scenic spots, scene types and images in the literature survey. Also, based on the number of Scenic type and the number of Scenic name in each Gok, landscape richness(LR) and landscape similarity(LS) of the Gugok scenic spots, the cognitive characteristics of the landscape in the 18th century were carefully observed. The results are as follows. Firstly, according to the description statistics of scenic spot types in Wuyi Mountain Chronicle, there were 41 descriptions of scenery names in the three paintings, among which rock, peak and stone accounted for the majority. According to the data, the number of rocks, peaks and stones in Wuyi-Gugok landscape accounted for more than half, which reflected the characteristics of geological landscape such as Danxia landform in Wuyi-Gugok landscape. Secondly, the landscape of Gugok Stream(九曲溪) was diverse and full of images. The 1^st Gok Daewangbong(大王峰) and Manjeongbong(幔亭峰), the 2^nd Gok Oknyeobong(玉女峰), the 3^rd Gok Sojangbong(小藏峰), the 4^th Gok Daejangbong(大藏峰), the 5^th Gok Daeeunbyeong(大隱屛) and Muijeongsa(武夷精舍), the 6^th Gok Seonjangbong(仙掌峰) and Cheonyubong(天游峰) all had outstanding landscape in each Gok. However, the landscape features of the 7^th~9^th Gok were relatively low. Thirdly, according to the landscape image survey of each Gok, the image formation of Gugok cultural landscape originates from the specificity of the myths and legends related to Wuyi Mountain, and the landscape is highly well-known. Due to the specificity, the landscape recognition was very high. In particular, the 1^st Gok and the 5^th Gok closely related to the Taoist culture based on Muigun, the Stone Carving culture and the Boat Tour culture related to neo-confucianism culture of Zhu Xi. Fourthly, according to the analysis results of landscape similarity of 41 landscape types shown in the figure, the similarity of A and C was very high. The morphological description and the relationship of distant and near performance was very similar. Therefore, it could be judged that this was obviously influenced by one painting. As a whole, the names of the scenes depicted in the three paintings were formed at least in the first half of 18^th century through a long history of inheritance, accumulated myths and legends, and the names of the scenes. The order of the scenery names in three Drawings had some differences. But among the scenery names appearing in all three Drawings, there were 21 stones, 20 rocks and 17 peaks. Stones, rocks and peaks guided the landscape of Gugok Streams in Wuyi Mountain. Fifthly, Seonjodae(仙釣臺) in A and C was described in the 4^th Gok, but what deserved attention was that it was known as the scenery name of the 3^rd Gok in Korean. In addition, Seungjindong(升眞洞) in the 1^st Gok and Seokdangsa(石堂寺) in the 7^th Gok were not described in Drawings A, B and C. This is a special point that needs to be studied in the future.

• Journal of Intelligence and Information Systems
• /
• v.19 no.4
• /
• pp.21-37
• /
• 2013

Recently, as the advent of the knowledge-based society, there are more people getting interested in the intellectual property. Especially, the ICT companies leading the high-tech industry are working hard to strive for systematic management of intellectual property. As we know, the patent information represents the intellectual capital of the company. Also now the quantitative analysis on the continuously accumulated patent information becomes possible. The analysis at various levels becomes also possible by utilizing the patent information, ranging from the patent level to the enterprise level, industrial level and country level. Through the patent information, we can identify the technology status and analyze the impact of the performance. We are also able to find out the flow of the knowledge through the network analysis. By that, we can not only identify the changes in technology, but also predict the direction of the future research. In the field using the network analysis there are two important analyses which utilize the patent citation information; citation indicator analysis utilizing the frequency of the citation and network analysis based on the citation relationships. Furthermore, this study analyzes whether there are any impacts between the size of the company and patent citation relationships. 74 S&P 500 registered companies that provide IT and communication services are selected for this study. In order to determine the relationship of patent citation between the companies, the patent citation in 2009 and 2010 is collected and sociomatrices which show the patent citation relationship between the companies are created. In addition, the companies' total assets are collected as an index of company size. The distance between companies is defined as the absolute value of the difference between the total assets. And simple differences are considered to be described as the hierarchy of the company. The QAP Correlation analysis and MR-QAP analysis is carried out by using the distance and hierarchy between companies, and also the sociomatrices that shows the patent citation in 2009 and 2010. Through the result of QAP Correlation analysis, the patent citation relationship between companies in the 2009's company's patent citation network and the 2010's company's patent citation network shows the highest correlation. In addition, positive correlation is shown in the patent citation relationships between companies and the distance between companies. This is because the patent citation relationship is increased when there is a difference of size between companies. Not only that, negative correlation is found through the analysis using the patent citation relationship between companies and the hierarchy between companies. Relatively it is indicated that there is a high evaluation about the patent of the higher tier companies influenced toward the lower tier companies. MR-QAP analysis is carried out as follow. The sociomatrix that is generated by using the year 2010 patent citation relationship is used as the dependent variable. Additionally the 2009's company's patent citation network and the distance and hierarchy networks between the companies are used as the independent variables. This study performed MR-QAP analysis to find the main factors influencing the patent citation relationship between the companies in 2010. The analysis results show that all independent variables have positively influenced the 2010's patent citation relationship between the companies. In particular, the 2009's patent citation relationship between the companies has the most significant impact on the 2010's, which means that there is consecutiveness regarding the patent citation relationships. Through the result of QAP correlation analysis and MR-QAP analysis, the patent citation relationship between companies is affected by the size of the companies. But the most significant impact is the patent citation relationships that had been done in the past. The reason why we need to maintain the patent citation relationship between companies is it might be important in the use of strategic aspect of the companies to look into relationships to share intellectual property between each other, also seen as an important auxiliary of the partner companies to cooperate with.

• Journal of Intelligence and Information Systems
• /
• v.19 no.4
• /
• pp.123-132
• /
• 2013

As the smartphones are equipped with various sensors such as the accelerometer, GPS, gravity sensor, gyros, ambient light sensor, proximity sensor, and so on, there have been many research works on making use of these sensors to create valuable applications. Human activity recognition is one such application that is motivated by various welfare applications such as the support for the elderly, measurement of calorie consumption, analysis of lifestyles, analysis of exercise patterns, and so on. One of the challenges faced when using the smartphone sensors for activity recognition is that the number of sensors used should be minimized to save the battery power. When the number of sensors used are restricted, it is difficult to realize a highly accurate activity recognizer or a classifier because it is hard to distinguish between subtly different activities relying on only limited information. The difficulty gets especially severe when the number of different activity classes to be distinguished is very large. In this paper, we show that a fairly accurate classifier can be built that can distinguish ten different activities by using only a single sensor data, i.e., the smartphone accelerometer data. The approach that we take to dealing with this ten-class problem is to use the ensemble of nested dichotomy (END) method that transforms a multi-class problem into multiple two-class problems. END builds a committee of binary classifiers in a nested fashion using a binary tree. At the root of the binary tree, the set of all the classes are split into two subsets of classes by using a binary classifier. At a child node of the tree, a subset of classes is again split into two smaller subsets by using another binary classifier. Continuing in this way, we can obtain a binary tree where each leaf node contains a single class. This binary tree can be viewed as a nested dichotomy that can make multi-class predictions. Depending on how a set of classes are split into two subsets at each node, the final tree that we obtain can be different. Since there can be some classes that are correlated, a particular tree may perform better than the others. However, we can hardly identify the best tree without deep domain knowledge. The END method copes with this problem by building multiple dichotomy trees randomly during learning, and then combining the predictions made by each tree during classification. The END method is generally known to perform well even when the base learner is unable to model complex decision boundaries As the base classifier at each node of the dichotomy, we have used another ensemble classifier called the random forest. A random forest is built by repeatedly generating a decision tree each time with a different random subset of features using a bootstrap sample. By combining bagging with random feature subset selection, a random forest enjoys the advantage of having more diverse ensemble members than a simple bagging. As an overall result, our ensemble of nested dichotomy can actually be seen as a committee of committees of decision trees that can deal with a multi-class problem with high accuracy. The ten classes of activities that we distinguish in this paper are 'Sitting', 'Standing', 'Walking', 'Running', 'Walking Uphill', 'Walking Downhill', 'Running Uphill', 'Running Downhill', 'Falling', and 'Hobbling'. The features used for classifying these activities include not only the magnitude of acceleration vector at each time point but also the maximum, the minimum, and the standard deviation of vector magnitude within a time window of the last 2 seconds, etc. For experiments to compare the performance of END with those of other methods, the accelerometer data has been collected at every 0.1 second for 2 minutes for each activity from 5 volunteers. Among these 5,900 ($=5{\times}(60{\times}2-2)/0.1$) data collected for each activity (the data for the first 2 seconds are trashed because they do not have time window data), 4,700 have been used for training and the rest for testing. Although 'Walking Uphill' is often confused with some other similar activities, END has been found to classify all of the ten activities with a fairly high accuracy of 98.4%. On the other hand, the accuracies achieved by a decision tree, a k-nearest neighbor, and a one-versus-rest support vector machine have been observed as 97.6%, 96.5%, and 97.6%, respectively.

• Journal of Intelligence and Information Systems
• /
• v.19 no.1
• /
• pp.79-94
• /
• 2013

Recently, the high value added business is steadily growing in the culture and art area. To generated high value from a performance, the satisfaction of audience is necessary. The flow in a critical factor for satisfaction, and it should be induced from audience and measures. To evaluate interest and emotion of audience on contents, producers or investors need a kind of index for the measurement of the flow. But it is neither easy to define the flow quantitatively, nor to collect audience's reaction immediately. The previous studies of the group flow were evaluated by the sum of the average value of each person's reaction. The flow or "good feeling" from each audience was extracted from his face, especially, the change of his (or her) expression and body movement. But it was not easy to handle the large amount of real-time data from each sensor signals. And also it was difficult to set experimental devices, in terms of economic and environmental problems. Because, all participants should have their own personal sensor to check their physical signal. Also each camera should be located in front of their head to catch their looks. Therefore we need more simple system to analyze group flow. This study provides the method for measurement of audiences flow with group synchronization at same time and place. To measure the synchronization, we made real-time processing system using the Differential Image and Group Emotion Analysis (GEA) system. Differential Image was obtained from camera and by the previous frame was subtracted from present frame. So the movement variation on audience's reaction was obtained. And then we developed a program, GEX(Group Emotion Analysis), for flow judgment model. After the measurement of the audience's reaction, the synchronization is divided as Dynamic State Synchronization and Static State Synchronization. The Dynamic State Synchronization accompanies audience's active reaction, while the Static State Synchronization means to movement of audience. The Dynamic State Synchronization can be caused by the audience's surprise action such as scary, creepy or reversal scene. And the Static State Synchronization was triggered by impressed or sad scene. Therefore we showed them several short movies containing various scenes mentioned previously. And these kind of scenes made them sad, clap, and creepy, etc. To check the movement of audience, we defined the critical point, ${\alpha}$and ${\beta}$. Dynamic State Synchronization was meaningful when the movement value was over critical point ${\beta}$, while Static State Synchronization was effective under critical point ${\alpha}$. ${\beta}$ is made by audience' clapping movement of 10 teams in stead of using average number of movement. After checking the reactive movement of audience, the percentage(%) ratio was calculated from the division of "people having reaction" by "total people". Total 37 teams were made in "2012 Seoul DMC Culture Open" and they involved the experiments. First, they followed induction to clap by staff. Second, basic scene for neutralize emotion of audience. Third, flow scene was displayed to audience. Forth, the reversal scene was introduced. And then 24 teams of them were provided with amuse and creepy scenes. And the other 10 teams were exposed with the sad scene. There were clapping and laughing action of audience on the amuse scene with shaking their head or hid with closing eyes. And also the sad or touching scene made them silent. If the results were over about 80%, the group could be judged as the synchronization and the flow were achieved. As a result, the audience showed similar reactions about similar stimulation at same time and place. Once we get an additional normalization and experiment, we can obtain find the flow factor through the synchronization on a much bigger group and this should be useful for planning contents.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.3
• /
• pp.49-82
• /
• 1965

For the stable and high yields of low-land rice in Korea, the characteristics of rice plant for the vegetative and physiological responses, plant type formation, and yield components have been studied in order to obtain the fundamental data for the improvement of cultural practices, especially for the ideal fertilizer application. Furthermore the environmental conditions in Korea including temperatures, light, precipitation, and soil conditions have been compared in the broad sense with those in Japan, and the application of nitrogen, phosphorus, potassium, silicate and other micro-nutrients were described in relation to the characteristics of environmental conditions for the improvement of fertilizer application. 1. The average yield of polished-rice per 10 are in Korea is about 204 kg and this values are much less than those in Japan and Taiwan where they produce 77% to 13% more than in Korea. The rate of yield increase a year in Korea is 4.2 kg, but in Japan and Taiwan the rates of yield increase a year are 81 % and 62%, respectively. It was also found that the coefficient of variation of yield is 7.7% in Korea, 6.7% in Japan and 2.5% in Taiwan. This means that the stability of producing rice in Korea is very low when compared with those in Japan and Taiwan. 2. It was learned from the results obtained from the 'annual yield estimation experiment' that there are big differences in the respect of plant type formations between rice crops grown in Japan and Korea. The important differences found were as follows: (1) The numbers of spikelets per 3.3 square meters are 891 in Korea and 1, 007 in Japan(13% more than in Korea). (2) The numbers of tillers per 3.3 square meters at the stage of maximum tillering are 1, 150 in Korea, but in Japan they showed 19% more than in Korea. (3) The ratio of effective tillers to total tillers is 77.5% in Korea and 74.7% in Japan, which seems to be higher in Korea than in Japan. But the ratio in Korea is very low when considered the numbers of total tillers in both countries. (4) The ratio of grain to straw is 85.4% in Korea and 96.3% in Japan. 3. The average temperatures during the growing season at the area of Suwon, Kwangjoo and Taegu are almost same as those in the district of Jookokoo(Fookoo yama) in Japan, i.e., the temperatures during the rice-growing season in Korea are similar to those in the southern-warm regions of Japan. 4. Considering the minimum temperatures at the stage of limiting transplanting, 13$^{\circ}C$, the time of transplanting might be 30 to 40 days earlier than presently practicing transplanting time, which comes around June 10. 5. The temperatures during the vegetative growth in Korea were higher than those temperatures that needed in the protein synthesis which ate the main metabolism during this stage. However, the temperatures at the time of reproductive growth was lower than the temperatures that needed in the sugar assimilation which is main metabolism in this stage. In this point of view, it might be considered that the proper time of growing rice plant in Korea would be rather earlier. 6. The temperatures and the day light conditions at the time of first tillering stage of rice plant, when planted as presenting transplanting practices, are very satisfactory, but the poor day light length, high temperatures and too wet conditions in the time of last-tillering stage(mid or last July) might cause the occurrence of disease such as blast. 7. The heading stage of rice plants at each region through nations when planted as presently practicing method comes when the day light length is short. 8. It was shown that the accumulated average air-temperature at the time of maturing stage was not enough and the heading time was too late, when considered the annual deviations of mean temperatures and low minimum temperatures. 9. The nitrogen content of each plant part at the each growing stage was very high at the stage of vegetative growth when compared with the nitrogen content at the stage of reproductive growth after heading. In this respect it was believed to be important to prevent the nutrient shortages at the reproductive stages, especially after the heading. 10. The area of unsatisfactory irrigation paddy fields and natural rain-fed paddy fields are getting reduced in Korea. The correlation between the rate of reducing unsatisfactory irrigation and natural rain-fed paddy fields and the rate of yield increase were computed. The correlation coefficients(r) between the area of unsatisfactory irrigation paddy fields and yield increase were +0.525, and between the natural rain-fed paddy fields and yield increase, +0.832 and between the unsatisfactory irrigation plus natural rain-fed paddy fields and yield increase, +0.84. And there were. highly significant positive correlations between natural rain-fed paddy fields and yield increases indicating that the less the area of natural rain-fed paddy fields, the greater the yields per unit area. 11. The results obtained from the fertilizer experiments (yield performance trials) conducted in both Korea and Japan showed that the yield of non-fertilized plots per 10 are was 231 kg in Korea and 360 kg in Japan. On the basis of this it might be concluded that the fertility of soil in Korea is lower than that in Japan. Furthermore it was. also found that the yields of non-nitrogen applied plots per 10 are were 236 kg in Korea and 383 kg in Japan. This also indicates that the yields of rice in Korea are largely depending on the nitrogen content in the soil. 12. The followings were obtained when the chemical natures of soils in both Korea and Japan were compared. (1) The content of organic matter, total nitrogen, exchangeable calcium, and magnesium in Korea were no more than the half those in Japan. (2) The content of N/2 chloride and soluble silicate in low-land soil were on the average lower in Korea. (3) The exchange capacity of bases in Korea was no more than half that in Japan. 13. It was also observed by comparing the soil nature of the soil with high yielding capacity with the soil with low yielding capacity that the exchange capacity of bases, exchangeable calcium and magnesium, potassium, phosphorus, manganese, silicate and iron were low in the soil with low yielding capacity. 14. The depth of furrow slice was always deeper in the soil with high yielding capacity, and the depth of furrow slice in Korea was also shallower than that in Japan. 15. Summarizing the various conditions mentioned previously and considering the effects of silicate and trace elements such as manganese and iron besides three elements on the physiological and plant type formation of rice crops, more realistic and more ideal fertilizing practices were proposed. proposed.

• Korean Journal of Veterinary Service
• /
• v.23 no.4
• /
• pp.321-333
• /
• 2000

In order to know the depletive changes of sulfamethazine residues in senlm and practical organs of rats orally administered with sulfamethazine sodium(SMS), the concentration of sulfamethazine was measured in serum and tissue(kidney, liver, spleen, testis, and skeletal muscle) of rats with using high performance liquid chromatography(HPLC). SMS was orally administrated to sprague-dawley male rats(body weight, 200~300g) with using sonde at the rate of 20mg/100g body weight(recommended therapeutic dose) on once a day for 3 days. There were investigated the depletive changes of the sulfamethazine in serum, kidney, liver, spleen, testis and skeletal muscle of rat at the time 8 hours, 1st, 2nd, 3rd, 4th, 5th and 6th day after administration SMS, respectively. The results obtained were summarized as follows; 1. After oral administration of the SMS, the mean concentrations of sulfamethazine in serum according to the time lapsed were showed 215.53$\pm$42.99ppm at the 8 hours after withdrawal of medicated sulfamethazine. And gradually according to the time lapsed, the concentrations of sulfamethazine residues in serum were significantly (p<.05) decreased 25.87$\pm$5.18ppm at 1st day, 2.30$\pm$0.61ppm at 3rd day and 0.11$\pm$0.02ppm at 6th day respectively. 2. The mean concentrations of sulfamethazine in kidney, liver, spleen, muscle and testis according to the time lapsed after administration SMS were showed 83.82$\pm$12.16, 81.77$\pm$12.88, 36.96$\pm$5.35, 35.96$\pm$TEX>$\pm$1.39 and 27.89$\pm$1.92 ppm at the 8 hours, respectively. And gradually according to the time lapsed, the concentrations of sulfamethazine residues in the each of samples were significantly(p<.05) decreased such as 7.15$\pm$0.26, 5.62$\pm$0.72, 2.43$\pm$0.29, 1.99$\pm$0.14 and 3.11$\pm$0.48 ppm at 1st day, 0.52$\pm$0.04, 1.32$\pm$0.22, 0.13$\pm$0.03, 0.15$\pm$0.06 and 0.26$\pm$0.11ppm at 3rd day, and 0.03$\pm$0.01, 0.11$\pm$0.03, 0.02$\pm$0.01, 0.009$\pm$0.001 and 0.02$\pm$0.01 ppm at 6th day, respectively. 3. After oral administration of the SMS to rats, the residual concentrations of sulfamethazine in skeletal muscle were significantly (p<.05) decreased 35.96$\pm$1.39 to 0.009$\pm$$\pm$0.001 ppm between 8 hours and 6th day, respectively From the 4th day, the residual concentrations of sulfamethazine were showed 0.10$\pm$0.04 ppm below 0.1 ppm at the permitted limit concentration of muscle in Korea. In conclusion, this study could be suggested the relationship between administrated period, doses of sulfonamides and residual aspects of serum and practical organs, and the importance of observing ceasing period of antibiotic drugs before forwarding livestocks to slaughter.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.7
• /
• pp.965-973
• /
• 2014

Three studies were conducted to investigate whether a chelated Cu can replace $CuSO_4$ as a growth promoter in pigs. In Exp. 1, a total of 240 piglets (Large White${\times}$Landrace, $7.36{\pm}0.10kg$) were randomly allocated to 1 of 3 treatments with 8 replicates and 10 piglets per pen. Treatments included a NRC control ($CuSO_4$, 6 mg/kg), two Cu supplementations from either $CuSO_4$ or $Cu(HMTBa)_2$ at 170 mg/kg. Pigs fed $Cu(HMTBa)_2$ were 6.0% heavier than pigs fed either the NRC control or 170 mg/kg $CuSO_4$ (p = 0.03) at the end of the experiment. During the 42 days of experimental period, pigs fed $Cu(HMTBa)_2$ gained 9.0% more (p = 0.01), tended to eat more feed (p = 0.09), and had better feed efficiency (p = 0.06) than those fed $CuSO_4$. Compared with the 6 mg/kg $CuSO_4$ NRC control, liver Cu was increased 2.7 times with 170 mg/kg $CuSO_4$ supplementation, and was further increased with $Cu(HMTBa)_2$ (4.5 times, p<0.05). In Exp. 2, a total of 616 crossbred piglets (PIC, $5.01{\pm}0.25kg$) were randomly allocated to 1 of 4 treatments with 7 replicates and 22 piglets per pen. Treatments included a NRC control (from $CuSO_4$), and three pharmaceutical levels of Cu (150 mg/kg) supplemented either from C$CuSO_4$, tri-basic copper chloride ($Cu_2[OH]_3C1$), or $Cu(HMTBa)_2$. Pigs fed $CuSO_4$ or $Cu(HMTBa)_2$ had better feed efficiency (p = 0.01) and tended to gain more (p = 0.08) compared with those fed the NRC control. Pigs fed $Cu_2[OH]_2C1$ were intermediate. Pigs fed $Cu(HMTBa)_2$ had the highest liver Cu, which was significantly higher than those fed ($Cu_2[OH]_3C1$) or the negative control (p = 0.01). In Exp. 3, a total of 1,048 pigs (PIC, $32.36{\pm}0.29kg$) were allotted to 6 treatments with 8 replicates per treatment and 20 to 22 pigs per pen. The treatments included a NRC control with 4 mg/kg Cu from $CuSO_4$, a positive control with 160 mg/kg Cu from $CuSO_4$, and incremental levels of $Cu(HMTBa)_2$ at 20, 40, 80, and 160 mg/kg. During the overall experimental period of 100 days, no benefit from 160 mg/kg $CuSO_4$ was observed. Pigs fed $Cu(HMTBa)_2$ had increased ADG (linear and quadratic, $p{\leq}0.05$) and feed efficiency (linear and quadratic, $p{\leq}0.05$) up to 80 mg/kg and no further improvement was observed at 160 mg/kg for the whole experimental period. Pigs fed 80 mg/kg $Cu(HMTBa)_2$ weighed 1.8 kg more (p = 0.07) and were 2.3 kg heavier in carcass (p<0.01) compared with pigs fed 160 mg/kg $CuSO_4$. In addition, loin depth was increased with increased $Cu(HMTBa)_2$ supplementation with pigs fed 80 mg/kg $Cu(HMTBa)_2$ had the greatest loin depth (p<0.05). In summary, $Cu(HMTBa)_2$ can be used to replace high $CuSO_4$ as a growth promoter in nursery and grower-finisher pigs.