• 한국조경학회지
• /
• 제40권1호
• /
• pp.110-117
• /
• 2012

본 연구는 우리나라 자생종 굴거리나무에 대한 실내조명 하에서 광적응성을 조사해 보고 실내조경공간으로 도입할 때, 도입방안을 제시해 보고자 수행되었다. 공시수종인 굴거리나무는 제주도 농가에서 1년생을 구입한 후, 경남과학기술대학교 종합농장 유리온실에서 40일간 순화시킨 후 2010년 2월 15일에서 2010년 11월 15일까지 실험하였다. 첫째, 형광등의 경우, 100lux에서 500lux까지 식물이 고사하거나 잎이 지는 현상을 보여 생육상태가 좋지 못하였으며, 1,000lux부터 원활한 생육 및 생장을 보였다. 엽수나 수형, 체내 광합성률, 관상가치 등을 토대로 살펴볼 때, 형광등 1,000lux에서 가장 양호한 생장을 하여 최적광도인 것으로 조사되었다. 둘째, LED등의 경우,100lux에서 1,000lux까지 고사현상을 보여 생육상태가 불량하였으며, 광도가 높을수록 원활한 생장을 보였다. 2,000lux에서 가장 원활한 생육 및 생장을 하였다. 셋째, 삼파장의 경우,1,000lux까지 고사현상이 심하여 도입한 4개의 광원 중 생육상태가 가장 좋지 않아 전반적으로 삼파장은 굴거리나무 생육에 부적합한 것으로 파악되었다. 2,000lux에서 가장 원활한 생육 및 생장을 하였다. 넷째, 광섬유의 경우 100lux하에서도 식물 전체가 고사하는 현상은 보이지 않아 생육이 가능하여 도입광원 중 생육 및 생장상태가 가장 양호하였다. 대체적으로 광도가 높을수록 생장률이 높았으나,2,000lux보다 1,000lux하에서 엽수의 출엽률 및 수형이 흐트러지지 않아 관상가치가 더 좋았으며, 체내 광합성률도 높아 1,000lux를 조명해 주는 것이 가장 효과적인 것으로 파악되었다. 광적응성을 고려하여 굴거리나무를 실내조경공간으로 도입할 때, 광섬유, 형광등, LED등의 순으로 도입하는 것이 적합하며, 삼파장 등은 부적합한 것으로 파악되었다. 광원별 최적광도는 광섬유와 형광등을 도입할 경우 1,000lux, LED등을 도입할 경우 2,000lux를 조명해 주는 것이 효과적인 것으로 나타났다. 또한, 자생종 굴거리나무는 외래종인 대엽홍콩을 대체할 수 있는 수종으로 실내조경식물로 도입이 가능하며, 중심목으로 활용할 수 있을 것으로 기대되었다.

• 한국전기전자재료학회논문지
• /
• 제37권4호
• /
• pp.394-399
• /
• 2024

An irradiator is developed using two UVA wavelength ranges of SMD LEDs as a curing light source. This module has dimensions of 545×111×300 mm³ and is equipped with a TIR bar-shaped lens made of PDMS silicone resin. The developed irradiator offers high uniformity, with 89% in the centerline of the horizontal axis direction, for two different wavelength ranges of 365 nm and 385 nm. The radiation intensity from the light source module shows highly directional characteristics, and the irradiator provides a maximum irradiance of 1,634 mW/cm² at a working distance of 50 mm. During the initial 5 minutes of operation, the irradiance experiences a rapid decrease. However, this issue is addressed by optimizing the LED's current reduction characteristics and managing the Transistor's temperature rise in the constant current circuit. After continuous operation for approximately 60 minutes. The highest temperature, near the central part of the irradiating surface, reaches 69.7℃, while the lowest temperature, near the edges, is 41.1℃.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.27-27
• /
• 2003

The Automated Quantitative Knife-Edge Test (AQuaKET) method was developed for testing the surface profiles of large optics with high accuracy. Testing with the required accuracy of very large telescope is not an easy job to achieve, as it is a nano-technology. There are lots of possible error sources which can occur during the measurements and in the data processing of the AQuaKET. The error sources can be categorized into 5 areas: optics, mechanics, electronics, numerical processes, and system. In this paper, possible error sources in Optics are discussed, which are intensity variation of the light source, diffraction effects, and parallax effect. In this talk, those possible error sources in optics are presented and discussed.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.646-649
• /
• 2014

Performances of spectrum-sliced channels are strongly affected by their relative intensity noise (RIN). We use polarization-independent optical modulators (PIOMs) for spectrum-sliced channels to suppress their RIN. The PIOM driven by a high sinusoidal voltage signal evenly redistributes optical frequency components in the spectral domain and reduces the RIN. It can be used at a broadband light source (BLS) output to produce spectrum-sliced channels having lower RIN values. Also, it can be used for each spectrum-sliced channel within each optical network unit (ONU). In our experiment, where 12.5-GHz-spaced spectrum-sliced channels are used in 1-GbE speed, the use of PIOM at the BLS output reduces the bit error rate (BER) of the spectrum-sliced channel by more than an order of magnitude. The use of PIOM within the ONU reduces the BER by approximately 3 orders of magnitude.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.15-18
• /
• 2004

Recently, the eletrodeless lamp is introduced as a new light source of a high efficacy and long life. Although eletrodeless lamp's size is large, most of them is applied to general luminaire for HID lamps. It causes to decrease eletrodeless lamp's efficacy. Therefore, refractor luminaires can be an option to maintain efficacy, so that reflector luminaires are developed for such lamps. The purpose of this study is to develope a optical numerical model of planar prism luminaire that is able to obtain various luminous intensity distributions.

• 대한소아치과학회지
• /
• 제28권2호
• /
• pp.199-206
• /
• 2001

플라즈마 아크 광원을 사용하는 광중합기를 저출력 할로겐 광원을 사용하는 전통적인 광중합기와 비교 평가하기 위하여, 세 종류의 복합레진을 두께가 2, 3, 4, 5mm인 몰드에 충전하고 레진 상면을 할로겐광으로 40초간, 플라즈마광으로 3, 6, 9초간 조사한 후 레진 상면과 하면의 표면미세경도를 각각 측정하였다. 레진시편 상면의 표면경도와 하면의 표면경도 간의 차이는, 두께 2mm 시편에 할로겐광을 40초간 조사하였거나 플라즈마광을 9초간 조사한 경우들을 제외하고, 모두 유의하였다(P<0.05). 레진시편 상면의 표면경도는 전체 실험군들에서 서로 유의한 차이가 없었다. 레진시편 하면의 표면경도는 전체적으로 보아 할로겐광을 40초간 조사한 군들에서 가장 높았고 플라즈마광의 조사시간이 감소함에 따라 감소하였으며 레진시편의 두께가 증가함에 따라 감소하였다. 이상의 결과는 복합레진의 중합깊이 측면에서 볼 때 3, 6, 9초간 조사하는 고출력 플라즈마광의 중합능력이 40초간 조사하는 저출력 할로겐광의 중합능력에 미치지 못함을 시사한다.

• Current Optics and Photonics
• /
• 제7권5호
• /
• pp.537-544
• /
• 2023

Differential phase contrast (DPC) microscopy, a central quantitative phase imaging (QPI) technique in cell biology, facilitates label-free, real-time monitoring of intrinsic optical phase variations in biological samples. The existing DPC imaging theory, while important for QPI, is grounded in paraxial diffraction theory. However, this theory lacks accuracy when applied to high numerical aperture (NA) systems that are vital for high-resolution cellular studies. To tackle this limitation, we have, for the first time, formulated a nonparaxial DPC imaging equation with a transmission cross-coefficient (TCC) for high NA DPC microscopy. Our theoretical framework incorporates the apodization of the high NA objective lens, nonparaxial light propagation, and the angular distribution of source intensity or detector sensitivity. Thus, our TCC model deviates significantly from traditional paraxial TCCs, influenced by both NA and the angular variation of illumination or detection. Our nonparaxial imaging theory could enhance phase retrieval accuracy in QPI based on high NA DPC imaging.

• BMB Reports
• /
• 제34권6호
• /
• pp.551-558
• /
• 2001

We extended the measurable time scale of DNA dynamics to submicrosecond using a long-lifetime metal-ligand complex, $[Ru(phen)_2(dppz)]^{2+}$ (phen=1,10-phenanthroline, dppz=dipyrido[3,2-a:2',3'-c]phenazine) (RuPD), which displays a mean lifetime near 350 ns. We partially characterized the fluorescence resonance energy transfer (FRET) in calf thymus DNA from RuPD to nile blue (NB) using frequency-domain fluorometry with a high-intensity, blue light-emitting diode (LED) as the modulated light source. There was a significant overlap of the emission spectrum of the donor RuPD with the absorption spectrum of the acceptor NB. The F$\ddot{o}$rster distance ($R_0$) that was calculated from the spectral overlap was $33.4\;{\AA}$. We observed dramatic decreases in the steady-state fluorescence intensities of RuPD when the NB concentration was increased. The intensity decays of RuPD were matched the closest by a triple exponential decay. The mean decay time of RuPD in the absence of the acceptor NB was 350.7 ns. In a concentration-dependent manner, RuPD showed rapid intensity decay times upon adding NB. The mean decay time decreased to 184.6 ns at $100\;{\mu}M$ NB. The FRET efficiency values that are calculated from the mean decay times increased from 0.107 at $20\;{\mu}M$ NB to 0.474 at $100\;{\mu}M$ NB concentration. The use of FRET with a long-lifetime metal-ligand complex donor is expected to offer the opportunity to increase the information about the structure and dynamics of nucleic acids.

• 한국수산과학회지
• /
• 제56권6호
• /
• pp.878-888
• /
• 2023

Growth responses of Chlorella vulgaris exposed to different light intensities and wavelengths of light-emitting diodes (LEDs) were investigated. C. vulgaris was cultured under red LED (650 nm), blue LED (450 nm), green LED (520 nm), and fluorescent lamps (three wavelengths, control). The maximum growth rates (µ_max) of C. vulgaris were highest under the blue LED, followed by the red LED, green LED, and fluorescent lamps. The low compensation photon flux density (I₀) and low half-saturation constants (K_s) were observed in C. vulgaris cultured under the red LED, indicating that high C. vulgaris growth is closely related to the low light intensity of the red LED suggesting that the red LED can be useful for the biomass production of C. vulgaris. Furthermore, it was observed that under the blue LED during the stationary phase, there was an increase in useful bioactive substances, such as proteins and lipids, which are beneficial for biomass production. In conclusion, the red LED is an economical light source that can enhance cell density, and the blue LED is effective in promoting valuable intracellular substances.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.15-22
• /
• 2014

We present a novel bandwidth measurement scheme for multimode optical fibers. Amplified spontaneous emission (ASE) radiation was utilized for a source of intrinsically modulated light with a wide modulation bandwidth. In our measurement scheme, the continuous-wave (CW) ASE light that passed through a multimode fiber (MMF) under test was analyzed by the fourth-order power with a high-speed photodetector and an electric spectrum analyzer. The modulation transfer function of the multimode fiber could be directly measured with the photoelectric spectra in the modulation frequency domain. The measurement result of our method was experimentally compared to that of the conventional measurement scheme based on the impulse response measurement. It has been found that our scheme provides a stable measurement means of MMF characterization that is suitable for the field testing due to the simplicity of the system.