• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.34-34
• /
• 1978

To find out the power tiller's travel and tractive characteristics on the general slope land, the tractive p:nver transmitting system was divided into the internal an,~ external power transmission systems. The performance of power tiller's engine which is the initial unit of internal transmission system was tested. In addition, the mathematical model for the tractive force of driving wheel which is the initial unit of external transmission system, was derived by energy and force balance. An analytical solution of performed for tractive forces was determined by use of the model through the digital computer programme. To justify the reliability of the theoretical value, the draft force was measured by the strain gauge system on the general slope land and compared with theoretical values. The results of the analytical and experimental performance of power tiller on the field may be summarized as follows; (1) The mathematical equation of rolIing resistance was derived as $$Rh=\frac {W_z-AC \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\] sin\theta_1}} {tan\phi \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]+\frac{tan\theta_1}{1}$$ and angle of rolling resistance as $$\theta _1 - tan^1\[ \frac {2T(AcrS_0 - T)+\sqrt (T-AcrS_0)^2(2T)^2-4(T^2-W_2^2r^2)\times (T-AcrS_0)^2 W_z^2r^2S_0^2tan^2\phi} {2(T^2-W_z^2r^2)S_0tan\phi}\] $$and the equation of frft force was derived as$$P=(AC+Rtan\phi)\[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]cos\phi_1 ? \frac {W_z ?{AC\[ [1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]sin\phi_1 {tan\phi[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\]+ \frac {tan\phi_1} { 1} ? W_1sin\alpha $$The slip coefficient K in these equations was fitted to approximately 1. 5 on the level lands and 2 on the slope land. (2) The coefficient of rolling resistance Rn was increased with increasing slip percent 5 and did not influenced by the angle of slope land. The angle of rolling resistance Ol was increasing sinkage Z of driving wheel. The value of Ol was found to be within the limits of Ol =2? "'16?. (3) The vertical weight transfered to power tiller on general slope land can be estim ated by use of th~ derived equation: $$R_pz= \frac {\sum_{i=1}^{4}{W_i}} {l_T} { (l_T-l) cos\alpha cos\beta ? \bar(h) sin \alpha - W_1 cos\alpha cos\beta$$The vertical transfer weight $R_pz$ was decreased with increasing the angle of slope land. The ratio of weight difference of right and left driving wheel on slop eland,$\lambda= \frac { {W_L_Z} - {W_R_Z}} {W_Z} $, was increased from ,$\lambda$=0 to$\lambda$=0.4 with increasing the angle of side slope land ($\beta = 0^\circ~20^\circ) (4) In case of no draft resistance, the difference between the travelling velocities on the level and the slope land was very small to give 0.5m/sec, in which the travelling velocity on the general slope land was decreased in curvilinear trend as the draft load increased. The decreasing rate of travelling velocity by the increase of side slope angle was less than that by the increase of hill slope angle a, (5) Rate of side slip by the side slope angle was defined as $ S_r=\frac {S_s}{l_s} \times$ 100( %), and the rate of side slip of the low travelling velocity was larger than that of the high travelling velocity. (6) Draft forces of power tiller did not affect by the angular velocity of driving wheel, and maximum draft coefficient occurred at slip percent of S=60% and the maximum draft power efficiency occurred at slip percent of S=30%. The maximum draft coefficient occurred at slip percent of S=60% on the side slope land, and the draft coefficent was nearly constant regardless of the side slope angle on the hill slope land. The maximum draft coefficient occurred at slip perecent of S=65% and it was decreased with increasing hill slope angle $\alpha$. The maximum draft power efficiency occurred at S=30 % on the general slope land. Therefore, it would be reasonable to have the draft operation at slip percent of S=30% on the general slope land. (7) The portions of the power supplied by the engine of the power tiller which were used as the source of draft power were 46.7% on the concrete road, 26.7% on the level land, and 13~20%; on the general slope land ($\alpha = O~ 15^\circ ,\beta = 0 ~ 10^\circ$) , respectively. Therefore, it may be desirable to develope the new mechanism of the external pO'wer transmitting system for the general slope land to improved its performance.

• Journal of Environmental Impact Assessment
• /
• v.25 no.3
• /
• pp.209-221
• /
• 2016

The section from water source to 2.6km upper stream of Hantan River is protected as the drinking water quality protection area according to guidelines of Ministry of Environment, because water source of the Gwanin water intake plant has been known the river. However, opinions were consistently brought up that the standard of water source protection zone must be changed with using underground water as water source because of contribution possibility of underground water as the water source of Gwanin water intake facility. In this regard, hydrogeologic investigation including resistivity survey and hydrogeochemical investigation were carried out to assess water source and infiltration of contaminant for the plant. Quaternary basaltic rocks (50m thick with four layers) covered most of the study area on the granite basement. As the result of the resistivity survey, it is revealed that permeable aquifer is distributed in the boundary of two layers: the basaltic layer with low resistivity; and the granite with high resistivity. Considering of outflow from Gwanin water intake facility, the area possessing underground water was estimated at least $5.7km^2$. The underground water recharged from Cheorwon plain was presumed to outflow along the surface of unconformity plane of basalt and granite. Based on field parameters and major dissolved constituents, groundwater and river water clearly distinguished and the spring water was similar to groundwater from the basaltic aquifer. Temporal variation of $SiO_2$, Mg, $NO_3$, and $SO_4$ concentrations indicated that spring water and nearby groundwater were originated from the basaltic aquifer and other groundwater from granitic aquifer. In conclusion, the spring of the Gwanin water intake plant was distinguished from river water in terms of hydrogeochemical characteristics and mainly contributed from the basaltic aquifer.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.200-207
• /
• 2019

The movement distance and home range size of Pelophylax chosenicus were identified in the rice paddy and ecological park as alternative habitats from July to November 2017. A total of 39 frogs were tracked by radio tracking method. As a result, the average move distance in the population of rice paddy was 11.7 ± 1.9 m (n = 64) and the population of ecological park was 24.7 ± 4.3 m (n = 39). The move distance between the two populations was significantly different. The mean MCP of the population of rice paddy was 181.2 ± 110.8 m² (n = 11) and the population of ecological park was 416.1 ± 276.2 m² (n = 10), but there was no significant difference. The population area of rice paddy was 4,160 m² (Kernel density 95%) and the core area was 1,080 m² (Kernel density 50%). The population area (Kernel density 95%) of ecological park was 5,391 m² and the core area (Kernel density 50%) was 736 m². This study shows that it is appropriate to construct the area of alternative habitat for P. chosenicus at least 1.33 ha, and it is more advantageous for the ecological park to be constructed than the paddy field with high development pressure and human interference. If the rice paddies were to be abandoned for several years, or to be used traditional farming methods, such as refraining from using agricultural machinery and chemicals, they could be used as alternative habitat for P. chosenicus.

• Journal of Environmental Impact Assessment
• /
• v.29 no.1
• /
• pp.26-36
• /
• 2020

This study aimed at investigating present research and knowledge-base on climate change adaptation in ecosystem sector and analyzed the current status of basic information on ecosystem that functions as evidence-base of climate change adaptation to deduce the suggestions for the future development for knowledge and information in biodiversity. In this perspective, a questionary survey titled as "the ecological knowledge-base and information needs for climate change adaptation" with the researchers who were engaged with adaptation studies for biodiversity in the ecosystem related-research institutes including national and 17 regional local governments-affiliated agencies in Korea. The results are as follows; current status of utilizing ecological information which supports climate change adaptation strategy, future needs for adaptation knowledge and ecological information, and activation of utilizing ecological information. The majority of respondents (90.7%) replied that the ecological information has high relevance when conducting research on climate change adaptation. However, only half of all respondents (53.2%) agreed with the real viability of current information to the adaptation research. Particularly, urgent priority for researchers was deduced as intensifying knowledge-base and constructing related information on 'ecosystem change from climate change (productivity, community structure, food chain, phenology, range distribution, and number of individuals) with the overall improvement of information contents and its quality. The respondents emphasized with the necessity of conducting field surveys of local ecosystem and constructing ecosystem inventories, advancing monitoring designs for climate change in ecosystem, and case studies for regional ecosystem changes with the guidance or guidelines for monitoring ecosystem change to enhance the quality of adaptation research and produce related information. In terms of activation for ecological information usage, national and local adaptation network should be working based on the integrated ecological platform necessary to support exchanges of knowledge and information and to expand ecosystem types in time and spatial dimension.

• Applied Microscopy
• /
• v.38 no.4
• /
• pp.279-284
• /
• 2008

The phase change materials have been extensively used as an optical rewritable data storage media utilizing their phase change properties. Recently, the phase change materials have been spotlighted for the application of non-volatile memory device, such as the phase change random access memory. In this work, we have investigated the crystallization behavior and microstructure analysis of In-Sb-Te (IST) thin films deposited by RF magnetron sputtering. Transmission electron microscopy measurement was carried out after the annealing at $300^{\circ}C$, $350^{\circ}C$, $400^{\circ}C$ and $450^{\circ}C$ for 5 min. It was observed that InSb phases change into $In_3SbTe_2$ phases and InTe phases as the temperature increases. It was found that the thickness of thin films was decreased and the grain size was increased by the bright field transmission electron microscopy (BF TEM) images and the selected area electron diffraction (SAED) patterns. In a high resolution transmission electron microscopy (HRTEM) study, it shows that $350^{\circ}C$-annealed InSb phases have {111} facet because the surface energy of a {111} close-packed plane is the lowest in FCC crystals. When the film was heated up to $400^{\circ}C$, $In_3SbTe_2$ grains have coherent micro-twins with {111} mirror plane, and they are healed annealing at $450^{\circ}C$. From the HRTEM, InTe phase separation was occurred in this stage. It can be found that $In_3SbTe_2$ forms in the crystallization process as composition of the film near stoichiometric composition, while InTe phase separation may take place as the composition deviates from $In_3SbTe_2$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.1
• /
• pp.1-6
• /
• 2001

This experiment was conducted to evaluated the effect of maturity at harvest on the changes in quality of round baled rye silage at forage experimental field of Grassland and Forage Crops Division, National Livestock Research Institute, RDA, Suwon in 1998. The experimental design was a split-plot design with three replications. The main plots were three different harvest stages : boot, heading and flowering stages, and the subplots were days after ensiling : 1, 2, 3, 5, 10, 30, 45, and 60 days. The wilting period of boot, heading and flowering stages were 1, 0.5 and 0.5 days, respectively. The final pH of rye silage was higher in the order of flowering, boot and heading stages. And pH of flowering stage began to change at early fermentation period, but that of boot and heading stages was delayed 1~2 days. Ammonia-N content of boot stage was highest. and that was increased as fermentation progressed. But Ammonia-N of heading stage was decreased to 30 days. then that was increased after 45 days fermentation. Among fermentation periods, inside temperature of deep place was not affected by external temperature. And that of deep place was increased to 3$0^{\circ}C$ at early fermentation. then decreased as fermentation progressed. However surface temperature was affected by external temperature after 10 days. Acetic acid content was not changed with 5 days by harvest stages, but that of boot stage was increased after 10 days. Butyric acid of boot stage was increased after 5 days. but that of heading stage was increased after 10 days. However lactic acid was increased from 1~2% to 6~8%. Lactic acid bacteria (LAB) of heading and flowering stages were highest at 5 days fermentation, and that of boot stage was highest at 10 days fermentation. The results of this study indicate that fermentation of round baled rye silage occur within 5 days. Therefore, any modification should be applied with an 5 days for high quality of round baled rye silage.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.2
• /
• pp.71-78
• /
• 1987

This experiment was carried out to examine the effects of sowing method and summer management on the dry matter yield, dead matter, weed development and ground cover of orchardgrass (Dactylis glomerata L.) meadow. The experiment was allocated as a split-split plot design with three replications. The main plots were sowing method of drilling and broadcasting, sub plots were drainage of experimental field, adequate and inadequate, and sub-sub plots were cutting timeof orchardgrass, cutting before rainy season started and cutting after rainy season ended. The experiment was undertaken over a period of 14 months from September, 1983 to October, 1984. The results obtained are summarized as follows: 1. There were no significant differences in dry matter yield among treatments at the first cutting, but cutting before rainy season produced significantly more forage yield ($P{\le}0.01$) than cutting after rainy season at the second and third cuts. At the third cutting, drilled orchardgrass meadow showed a significant dry matter yield ($P{\le}0.05$) than broadcast orchardgrass meadow, 2. The dead matter of orchardgrass was accumulated only at the second cutting when orchardgrass meadow cut after rainy season. Orchardgrass produced in the adequate and inadequate drainage plots consisted 20.4 and 35.9% of dead material, respectively, but no significant difference was found between two drainage treatments. 3. Drilled orchardgrass meadow produced significantly less weeds ($P{\le}0.05$) than broadcast orchardgrass meadow, but the plots cut after rainy season produced significantly more weeds ($P{\le}0.01$) than the plots cut before rainy season. 4. The percent ground cover of orchardgrass in the plots cut before rainy season was significantly higher ($P{\le}0.01$) than that in the plots cut after rainy season at the second cutting. Drilled plots showed a slight increase in the ground cover than the broadcast, but the difference was not significant. The same trend of ground cover of the meadow estimated at the second cutting was sustained after the third cutting. 5. Based on the results of the experiment, it indicates that the second cut of orchardgrass should be made before rainy season related for maintaining high yield of the meadow. Drilling as a sowing method of orchardgrass meadow could be adopted in the view point of reducing weed development.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.241-250
• /
• 1999

A field plot experiment was carried out on mixed pasture from October 1995 to October 1997 to examine the effect of weed control as affected by the difference of mixed pasture species, planning with spilt plot design which main plots of 2 treatments (companion crop Italian ryegrass Lolium multiflorum and Kentucky bluegrass Poa pratensis) are divided into subplots of 4 treatments (T1: single companion crop, T2: Tall fescue Festuca arundinasea + Orchardgrass Dactylis glomerata + Ladino clover Trifolium repens, T3 : Perennial ryegrass Lolium perenne + orchardgrass + ladino clover, T4 : orchardgrass + ladino clover). Average 2 year-dry matter yields of companion crops as whole plots, Italian ryegrass and Kentucky bluegrass, were 15,437kg/ha and 14,629kg/ha, respectively and those of T1, T2, T3 and T4 as sub plots were 14,815, 15,407, 14,629 and 15,187kg/ha respectively without statistical1y significant difference(P>0.05). Though there was no significant difference between the dry matter yields of Italian ryegrass and Kentucky bluegrass, as whole plots, at 1st harvest of second year, dry matter yields of T3 and T4, as 4,591kg/ha and 4,816kg/ha respectively, were higher than those of T1, 3,376kg/ha(P<0.05), significantly. There was a significant difference among 2nd year-average DM yields of sub plots(P<0.05), showing highest with T4 15,131kg/ha and least with T1 13,085kg/ha and T3 13,269kg/ha. Italian ryegrass, as the companion crop, was better for the control of weeds in the early spring than Kentucky bluegrass, but reached to the similar botanical composition level with Kentucky bluegrass after summer with rapid decrease of Italian ryegrass. Percentage of Kentucky bluegrass in botanical composition increased slowly, but did'nt become an important factor for the control of weeds at the end of this experiment. Using orchardgrass in mixed pasture such as T2, T3 and T4 made weeds more decreased in mixed pasture than one in single conpanion crop. There was no difference among treatments of whole or sub plots in crude protein contents of pasture taken in this study. Contents of NDF and ADF of companion crop. Italian ryegrass plots harvested in October 1997 were hither than those of Kentucky bluegrass plots(P<0.05). ADF contents of Kentucky blue grass-plots taken in July 1997 has shown to be high significantly as compared to those of Italian ryegrass plots(P<0.01). The results of this study support that the companion crop Italian ryegrass was good for weed controls only in spring of 1st year after sowing and orchardgrass in mixed pastures played good roles for increase of dry matter yield and weed control.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.403-414
• /
• 2004

In the accompanying paper, we proposed a real. time volumetric imaging method using a cross array based on receive dynamic focusing and synthetic aperture focusing along lateral and elevational directions, respetively. But synthetic aperture methods using spherical waves are subject to beam spreading with increasing depth due to the wave diffraction phenomenon. Moreover, since the proposed method uses only one element for each transmission, it has a limited transmit power. To overcome these limitations, we propose a new real. time volumetric imaging method using cross arrays based on synthetic aperture technique with linear wave fronts. In the proposed method, linear wave fronts having different angles on the horizontal plane is transmitted successively from all transmit array elements. On receive, by employing the conventional dynamic focusing and synthetic aperture methods along lateral and elevational directions, respectively, ultrasound waves can be focused effectively at all imaging points. Mathematical analysis and computer simulation results show that the proposed method can provide uniform elevational resolution over a large depth of field. Especially, since the new method can construct a volume image with a limited number of transmit receive events using a full transmit aperture, it is suitable for real-time 3D imaging with high transmit power and volume rate.

• Korean Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.263-270
• /
• 2010

This is a research on development of water purification equipment called artificial floating island (=AFI) for the stagnant water area which can secure exuberant landscape and water-friendility. The equipment devised in this study is designed to make up the weakness of conventional AFIs and improves the removal efficiency of pollutants using the mixture of media and plants. The air compressor positioned at the inlet releases air with inflow continuously, the water pump at the outlet sprays as a form of fountain with causing a disturbance on stable water column, then, both of them contribute improvement of water quality over a large area. We applied Bio-stone as a media in this system and performed an experiment of pre-efficiency test, and we concluded that the higher pollutants concentration of inflow, the higher removal efficiency we obtained. At the result of lab-scale experiment, in the case of high-concentration inflow, in the removal efficiency of SS is 62.2%, BOD is 50.2%, COD is 55.1%, T-N is 31.6%, T-P is 38.4%. In addition, to evaluate the field application, we set up the facilities in Sin-gal lake located in Yongin-Si Gyeonggi-Do, and researched on the removal efficiency of outflow relative to the inflow. As a result, SS is 53.5%, BOD is 32.8%, COD is 36.9%, T-N is 22.6%, T-N is 33.2%.