• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.696-705
• /
• 1997

This paper presents an efficient adaptive predistortion technique compensating linear and nonlinear distortions caused by high-power amplifier (HPA) with memory in OFDM systems. The efficient adaptive data predistortion techniques proposed for compensation of HPA with memory in single carrier systems cannot be applied to OFDM systems since the possible input levels for HPA is infinite in OFDM systems. Also, previous adaptive predistortion techniques, based on Volterra series modeling, are not suitable for real-time implementation due to high computational burden and slow convergence rate. In the proposed approach, the memoryless HPA preceded by a linear filter in OFDM systems is modeled by the Wiener system which is then precompensated by the proposed adaptive predistorter with a minimum number of filter taps. An adaptive algorithm for adjusting the proposed adaptive predistorter is derived using the stochastic gradient method. It is demonstrated by computer simulation that the performance of OFDM system suffering from nonlinear distortion can be greatly improved by the proposed efficient adaptive predistorter using a small number of filter taps.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.99-105
• /
• 1995

This paper provides a highly efficient grinding for ferrous materials using ELID-grinding method. The grinding efficiency using ELID gring method with CIFB-cBN wheel and CB-cBN wheel is compared with general grinding method with V-cBN wheel. This paper measured grinding ratio for plunge grinding and grinding resistance for traverse grinding in order to investigate grinding ability. The results show that ELID grinding methods is useful for the high efficient grinding of ferrous materials.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.3
• /
• pp.343-350
• /
• 2006

This paper introduces a new high efficient bi-directional, non-isolated DC/DC converter. Through variations of the topology of the conventional Cuk converter, an optimum bi-directional DC/DC converter is proposed. Voltage and current in the proposed DC/DC converter are continuous. Furthermore, the efficiency in both step-up and step-down mode is improved over that of the conventional bi-directional converter. To prove the validation for the proposed converter, simulations and experiments are executed with a 300W bi-directional converter.

• Journal of Internet Computing and Services
• /
• v.4 no.6
• /
• pp.25-31
• /
• 2003

Multistage Interconnection networks (MIN) for the high performance computing and communications must be efficient and reliable. While a number of fault tolerance schemes have been developed, some of them are not efficient enough with respect to all evaluation measures or overheads of others are too significant. In this paper we develop a new efficient fault tolerant MIN which displays high reliability and fault tolerance capability using a simple structure. Structure and reliabilities of Enhanced Cube Network are evaluated and compared with previous designs to show the effectiveness of new design.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.795-797
• /
• 2005

This paper describes a measurement & verification scheme for the high efferent lighting program in Demand Side Management (DSM), which was Introduced in the beginning of the 1980's in Korea With the dramatic changes in the circumstance of power industry in Korea. It is required the reviewing for the existing process of DSM programs and the development of the new process methods/standards on the evaluation of DSM programs. To design an accurate evaluation scheme for the high efficient lighting program. In this paper, we develop an evaluation prototype for the high efficient lighting program using measurements and stipulated factors. The proposed scheme is tested by practical measurements and modified stipulated factors Results from the case studios show the proposed scheme could provide the practical performance evaluation results with promising accuracy.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1023-1026
• /
• 2002

In this paper, we propose an efficient transcoding of MPEG video. Transcoding is the process of converting a compressed video format to another different compressed video format. We propose an simple and efficient transcoding by requantization in which MPEG coded video at high bit-rate is converted into MPEG bitstream at lower bit-rate. To reduce a image quality degradation, we use HVS(Human Visual System) that is the effect that visibility of noise is less in high activity regions than in low activity regions. By using the effect, the part of image in high activity region is coarsely quantized without seriously degrading the image quality. Experimental results show that the proposed method can provide good performance.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.241-244
• /
• 2006

In this paper, we suggest the high efficient control method based on general PI control law to control the refrigeration system of the ship effectively. In the variable speed refrigeration system, the capacity and the superheat are controlled by inverters and electronic expansion valves respectively for saving energy and improving cost performance. Thus, we propose decoupling model to eliminate the interfering at first. Next, we design PI controller to control capacity and superheat independently. Finally the control performance was investigated through some experiments. The experiments results show that the PI control design can obtain good control performance deal with the varied control reference and thermal load.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2003.05a
• /
• pp.3-7
• /
• 2003

For high performance Grid environments, an efficient GIS(Grid Information Service is required In the Metacomputing Directory Service(MDS) of the Glogus middleware, the Lightweight Directory Access Protocol(LDAP), which is a distributed directory service protocol, is used. The LDAP GIS differs from general purpose LDAP directories in that most of the LDAP operations are write in Grid environments. To get an efficient design of the GIS, it is thus required to analyze the performance of the LDAP system in the context of Grid environments. This paper presents the result of a performance analysis of LDAP systems. The main objective of the evaluation is to see the performance scalability of the LDAP system in the Grid environment where the write operations prevails. Based on these results, we suggest directions of an efficient LDAP-based GIS for a high performance Grid.

• Journal of Educational Research in Mathematics
• /
• v.8 no.2
• /
• pp.587-603
• /
• 1998

Being in Learning-accomplishing rate on mutual cooperation studies of small group by different class, we can find that the sujective class of high group is much more efficient than the compared class of high group and that the subjective class of low group is more efficient than the compared class of low group as times goes. Moreover, in analysis of all directions on mathematical attitude, high group appears to be a great efficient in all areas such as confidence, flexibility, reaction, value, etc. and low group seems to have a little effect, by comparing the subjective class with the compared class. A. The result of a scholastic ability test High group had a great effect in the result of the first (Number and an expression) and second(An equation of a figure) scholastic ability test. As the time of research goes, the difference of average between the subjective class and the compared class has increased. Low group had no effect in the result of the first (Number and an expression) and the second (An equation of figure) scholastic ability test. But the difference of average grade between the subjective class and the compared class proved to be some efficient as time goes. (the first test is 0.94 and the second test is 3.33)We can find that the result of the third test (An exponent and log function) turned out be efficient. B. The change of mathematical attitudeHigh group had a great effect in confidence(+1.21), fiexibility(+1.92), will(-0.06), curiosity(+2.64), reaction(+1.50), value(+1.44). Low group appeared to be a little efficient in comparison between the subjective class and compared class. the average of both the subjective class and the compared class in low group decreased if not the result of pre-test but in that of pose-test. Therefore, we can find that the difference between mathematics of maddle school and that of high school gets bigger in Low group.C. The result of a question examinationAfter this research, the reaction that It is helpful to studying accomplishm- ent is 33.7%, the reaction that It is not helpful is 14.7%. After all, this research appears to be a positive reaction. After this study, the change of studying will seems to be much more not in Low group but in High group.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.6
• /
• pp.605-611
• /
• 2019

3D Vision system has many applications recently but popularization have many problems that need to be overcome. Volumetric display may process a amount of visual data and design the high efficient vision system for display. In case of stereo system for volumetric display, disparity vectors from the stereoscopic sequences and residual images with the reference images has been transmitted, and the reconstructed stereoscopic sequences have been displayed at the receiver. So central issue for the design of efficient volumetric vision system lies in selecting an appropriate stereo matching and robust vision system. In this paper, we propose high efficient vision system with the reduction of rectification error which can perform the 3D data extraction efficiently with low computational complexity. In experimental results with proposed vision system, the proposed method can perform the 3D data extraction efficiently with reducing rectification error and low computational complexity.