• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.109-119
• /
• 2004

Rapid prototyping (RP) technologies have been widely used to reduce the lead-time and development cost of new products. $VLM-_{ST}$ process has been developed to overcome the currently developed RP technologies such as a large building time, a high building cost, an additional post-processing and a large apparatus cost. $VLM-_{ST}$ process requires an additional human interaction due to the manual stacking and bonding. Hence, building time, building cost and the part quality are dependent on the skill of labor. A novel RP process, fully automated $VLM-_{ST}$ process ($VLM-_{ST}$), has been developed to improve building efficiency of the process and the human dependency of the part. The objective of this work is to propose a $VLM-_{ST}$ process and to develop an apparatus for implementation of the process. $VLM-_{ST}$ process and its apparatus have various technical novelties such as two step cutting using a rotating table, an automatic stacking method using two pilot holes and two reference shapes, a concept of automatic unit shape layer (AUSL), and an automatic bonding using the bonding roller and building magazine. In order to examine the efficiency and the applicability of the proposed process, various three-dimensional shapes, such as a piston, a human head shape and a human bust shape, were fabricated on the apparatus.

• 반도체디스플레이기술학회지
• /
• 제11권1호
• /
• pp.41-47
• /
• 2012

In DSSC, fundamental process conditions of upper electrode were established and low cost-oriented method for TCO layer was proposed. Especially, prominent properties, that is, open-circuit voltage of 500mV or more and short-circuit current of $25mA/cm^2$ were yielded by 2-step sintering of semiconductive powder layer. High efficiency-DSSC was able to fabricate without high cost-semiconductor apparatus in common laboratory conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.278-280
• /
• 2004

This paper analyzes the customer behavior on the high-efficiency lighting program from three angles, that is, rebates, electricity rates and the cost of measures. After deregulation, the importance of high efficiency DSM programs has been more and more increased. Especially, the new high-efficiency lighting apparatus has been developed and adopted as DSM program, so it is needed the policy to promote the lighting program diffusion.

• 한국응용과학기술학회지
• /
• 제37권5호
• /
• pp.1402-1408
• /
• 2020

에너지를 절감하기 위해 고효율 히트펌프를 개발하기 위한 많은 연구가 이루어지고 있으며, 실외기 코일에 발생하는 서리가 발생하는 현상을 줄이거나 없애기 위한 연구도 동시에 이루어지고 있다. 계절에 관계없이 히트펌프의 실외기에 서리가 발생하지 않는 연구를 진행할 수 있도록 자연상태와 동일한 조건에서 실험할 수 있는 항온챔버를 구축하였다. 실험장치의 타당성을 검증하기 위해 실험장치인 항온챔버 내의 실외기 앞 덕트의 직선 길이를 3가지 조건으로 나누어 시뮬레이션 하였다. 그 결과 덕트 관경의 10배 길이만큼 직선 공간을 확보해야 한다는 것을 알게 되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권3호
• /
• pp.42-49
• /
• 1993

Recently, because the lubricating oil showed a tendency to be emulsified and oxidized by high speed, high output and the extension of maintenance & conservation of marine engine, the cavitation erosion-corrosion at such an environment became a big problem on effective performance of engine. Therefore, there was a need to study the behavior and protection of erosion-corrosion damage, and then applied inhibitor to a protective method of cavitation erosion- corrosion damage. At this time, test environments were marine lubricating oil & various emulsified oil that mixed distilled water and sea water etc., and also used 20KHz, 24.mu.m piezoelectric vibrator as an experimental apparatus of cavitation erosion. With this apparatus, we investigated an influence of the emulsified oil on characteristics of erosion-corrosion and protection for erosion-corrosion by inhibitor at slide bearing metals.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.95-105
• /
• 2002

In order to reduce the lead-time and cost, the technology of rapid prototyping (RP) has been widely used. However, RP technologies have disadvantageous characteristics according to their working principle: low building speed, high cost for introduction and maintenance of RP apparatus, stair-stepped surface and additional post processing. A new rapid prototyping process, as a transfer type of Variable Lamination Manufacturing by using expandable polystyrene room (VLM-ST), has been developed to reduce building lime. apparatus cost including the introduction and the maintenance and additional post-processing. The objective of this study is to propose a VLM-ST process and to develop an apparatus for implementation of the process. Design criteria of the apparatus are defined and the techniques arc proposed to satisfy the design criterion. In order to examine the efficiency and applicability of the developed process, various three-dimensional shapes, such as a world-cup logo. a knob shape, an extruded cross, a twisted shape, a character, Son-o-kong. a helical gear shaped and a scissor shape are fabricated on the apparatus in which unit shape layer (USL) was generated to build up each layer.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.40-51
• /
• 2008

This research presents a new active auxiliary resonant snubber with for induction heating PWM high frequency inverter solving the problem of induction heating PWM high frequency inverter circuit which is using widely in the practical application of an induction heating apparatus, the soft switching operation and power control are impossible when the lowest power supply in the active auxiliary resonant snubber with for induction heating PWM high frequency inverter. The inverter circuit which is attempted by the on-off operation of a switch has the effect of reducing the power loss due to soft switching and high frequency switching. This confirms that power regulation is possible on a continuous basis from 0.25[kW] to 2.84[kW] where the duty factor(D) changes from 0.08 to 0.3 under zero current switching which operates by an asymmetrical pulse width modulating control. The power conversion efficiency is 95[%]. Due to these results, the active auxiliary resonant snubber for an induction heating PWM high frequency inverter is considered effective as a source of induction heating.

• 한국환경농학회지
• /
• 제25권1호
• /
• pp.14-24
• /
• 2006

자연정화공법에 의한 농촌 전원 독립가구 하수처리장치의 적정 설치방법을 결정하기 위하여 호기성조와 혐기성조로 구성된 소형 하수처리장치를 설계 및 시공하였다. 소형 하수처리장치에서 여재 깊이에 따른 수처리 효율을 조사한 결과 호기성조와 혐기성조 모두 여재의 깊이가 깊어질수록 수처리 효율이 증가함으로 여재의 깊이를 90 cm이상으로 하는 것이 좋을 것으로 판단된다. 소형 하수처리장치의 최적 깊이인 90 cm하에서 호기성조 대 혐기성조 비율에 따른 수처리 효율을 조사한 결과 모든 여재에서 1 : 2 및 1 : 3의 호기 혐기 비율이 1 : 1에 비해 약간 높은 경향이었다. 따라서 소형 하수처리장치에서의 최적조건은 여재의 깊이는 90 cm이었고, 호기 혐기 비율은 1 : 2의 비율이었으며, 최적 여재는 왕사와 쇄석이었으며, 최적조건하에서 수처리효율은 BOD가 $97{\sim}99%$, COD가 $87{\sim}97%$, SS가 $88{\sim}99%$, T-N이 $57{\sim}68%$ 및 T-P가 $96{\sim}99%$이었다. 따라서 이러한 조건을 자연정화공법을 이용한 하수처리장치에 적용하면 하수처리장치의 부지면적을 최대한 줄이면서 높은 하수처리효율을 유지할 수 있을 것으로 판단된다.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1544-1549
• /
• 2013

Recently, the linear compressors with the free piston driven by the linear motor have widely attention in the cooling apparatus such as a refrigerator due to high efficiency. The method of using triacs as a linear motor drive is not satisfactory to improve the efficiency of the linear compressor. In this paper, the performance of the linear compressor using a PWM inverter such as the efficiency is investigated with the variations of both mechanical resonant frequency and electrical resonant frequency. The control loop for controlling both the piston stroke and efficiency is suggested. Through simulation and experimental studies, the performance of both the stroke and angle controls for improving the efficiency of the linear compressor is verified.

• International Journal of Fluid Machinery and Systems
• /
• 제10권1호
• /
• pp.86-98
• /
• 2017

In order to obtain high efficiency and low resistance droplet separation apparatus, axial vane type gas-liquid separators with different guide vanes were designed, and the RNG $k-{\varepsilon}$ model as well as discrete phase model (DPM) were used to investigate the flow pattern inside the separators. It was shown that the tangential velocity distribution under different guide vanes have Rankine vortex characteristics, pressure distribution exhibits a high similarity which value becomes big as the increase of the blade outlet angle and the decrease of the guide vane numbers. The increase of the guide vane numbers and the decrease of the blade outlet angle could make separation improve significantly. The separation efficiency is almost 100% when the droplet diameter is bigger than $40{\mu}m$.