• Title/Summary/Keyword: High deposition

Search Result 3,346, Processing Time 0.025 seconds

"Over-inlay" block graft and differential morphometry: a novel block graft model to study bone regeneration and host-to-graft interfaces in rats

  • Ghiacci, Giulia;Graiani, Gallia;Ravanetti, Francesca;Lumetti, Simone;Manfredi, Edoardo;Galli, Carlo;Cacchioli, Antonio;Macaluso, Guido Maria;Sala, Roberto
    • Journal of Periodontal and Implant Science
    • /
    • v.46 no.4
    • /
    • pp.220-233
    • /
    • 2016
  • Purpose: The aim of this study was to present new a model that allows the study of the bone healing process, with an emphasis on the biological behavior of different graft-to-host interfaces. A standardized "over-inlay" surgical technique combined with a differential histomorphometric analysis is presented in order to optimize the use of critical-size calvarial defects in pre-clinical testing. Methods: Critical-size defects were created into the parietal bone of 8 male Wistar rats. Deproteinized bovine bone (DBBM) blocks were inserted into the defects, so that part of the block was included within the calvarial thickness and part exceeded the calvarial height (an "over-inlay" graft). All animals were sacrificed at 1 or 3 months. Histomorphometric and immunohistochemical evaluation was carried out within distinct regions of interest (ROIs): the areas adjacent to the native bone (BA), the periosteal area (PA) and the central area (CA). Results: The animals healed without complications. Differential morphometry allowed the examination of the tissue composition within distinct regions: the BA presented consistent amounts of new bone formation (NB), which increased over time ($24.53%{\pm}1.26%$ at 1 month; $37.73%{\pm}0.39%$ at 3 months), thus suggesting that this area makes a substantial contribution toward NB. The PA was mainly composed of fibrous tissue ($71.16%{\pm}8.06%$ and $78.30%{\pm}2.67%$, respectively), while the CA showed high amounts of DBBM at both time points ($78.30%{\pm}2.67%$ and $74.68%{\pm}1.07%$, respectively), demonstrating a slow remodeling process. Blood vessels revealed a progressive migration from the interface with native bone toward the central area of the graft. Osterix-positive cells observed at 1 month within the PA suggested that the periosteum was a source of osteoprogenitor elements. Alkaline phosphatase data on matrix deposition confirmed this observation. Conclusions: The present model allowed for a standardized investigation of distinct graft-to-host interfaces both at vertically augmented and inlay-augmented sites, thus possibly limiting the number of animals required for pre-clinical investigations.

Clinical Assessment and Survey of Periodontal Condition among Adolescents (임상검사 및 설문조사를 통한 청소년의 치주상태 연구)

  • Kim, Taehyoung;Lee, Dawoo;Kim, Jaegon;Yang, Yeonmi
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.43 no.3
    • /
    • pp.227-236
    • /
    • 2016
  • Periodontal disease, one of the most common oral diseases, has been widely researched. However, in the face of increasing incidence of adolescent periodontitis, there has been only little concern about the periodontal conditions in adolescents. The purpose of this study was to evaluate the periodontal health and assess the prevalence of the periodontal disease and its causing factors among adolescents. The data was collected from subjects ranging from age 10, 13 and 16 years old in Jeonju by clinical examination and survey. The prevalence of periodontal disease and plaque index value were higher in male than female (p < 0.05). The group of 13 years old subjects had the highest prevalence of periodontal disease (73.3%) and plaque index value (p < 0.05). Among the plaque index of each individual tooth, mandibular central incisor showed the highest value. The survey relating anticipated risk factors demonstrated that the group of 13 years old subjects had the least care for oral hygiene. Also, patients who received the treatment of scaling exhibited high plaque index (p < 0.05), and adolescents with great stress loads showed calculus deposition and increased plaque index (p < 0.05).

Impact of Meteorological Wind Fields Average on Predicting Volcanic Tephra Dispersion of Mt. Baekdu (백두산 화산 분출물 확산 예측에 대기흐름장 평균화가 미치는 영향)

  • Lee, Soon-Hwan;Yun, Sung-Hyo
    • Journal of the Korean earth science society
    • /
    • v.32 no.4
    • /
    • pp.360-372
    • /
    • 2011
  • In order to clarify the advection and dispersion characteristics of volcanic tephra to be emitted from the Mt. Baekdu, several numerical experiments were carried out using three-dimensional atmospheric dynamic model, Weather and Research Forecast (WRF) and Laglangian particles dispersion model FLEXPART. Four different temporally averaged meteorological values including wind speed and direction were used, and their averaged intervals of meteorological values are 1 month, 10 days, and 3days, respectively. Real time simulation without temporal averaging is also established in this study. As averaging time of meteorological elements is longer, wind along the principle direction is stronger. On the other hands, the tangential direction wind tends to be clearer when the time become shorten. Similar tendency was shown in the distribution of volcanic tephra because the dispersion of particles floating in the atmosphere is strongly associated with wind pattern. Wind transporting the volcanic tephra is divided clearly into upper and lower region and almost ash arriving the Korean Peninsula is released under 2 km high above the ground. Since setting up the temporal averaging of meteorological values is one of the critical factors to determine the density of tephra in the air and their surface deposition, reasonable time for averaging meteorological values should be established before the numerical dispersion assessment of volcanic tephra.

Effect of Cathode/anode Weight Ratio in $LiCoO_2/MPCF$ Cell ($LiCoO_2/MPCF$전지에서 정$\cdot$부극 중량비의 영향)

  • Kim Sang-Pil;Cho Jeong-Soo;Kim Hee-Je;Park Jeong-Hu;Yun Mun-Soo
    • Journal of the Korean Electrochemical Society
    • /
    • v.2 no.2
    • /
    • pp.75-80
    • /
    • 1999
  • Li-ion cells employ lithium transtion metal oxide as the cathode material and carbon as anode material. To manufacture Li-ion cell with higher capacity and better cycle life, the utilization of electrode materials should be as high as possible without lithium deposition onto the carbon surface during charging. A careful design of cell balance between cathode and anode materials as well as a proper charge method is a key factor to design Li-ion cell with long cycle life. In this study, we investigated the effect of cathode/anode weight ratio on the performance of $LiCoO_2/MPCF$ cell. First we evaluated the charge-discharge behaviours of half-cells. And cylindrical Li-ion cells were fabricated using graphitized MPCF anode and $LiCoO_2$ cathode. The voltage profiles for each half-cell in $LiCoO_2/MPCF$ cell were measured by using lithium metal as a reference electrode. Also, we evaluated the cyclic performance of $LiCoO_2/MPCF$ cells according to weight ratio. From the result of experiment $LiCoO_2$ cathode utilization was independent of weight ratio, but MPCF anode utilization was dependant on weight ratio. Also, the optimal weight ratio of $LiCoO_2/MPCF$ cell was found to be $2.0\~2.2$.

Geochemistry of Shallow gases taken from the core sediments in the southeastern Ulleung Basin (울릉분지 남동부 시추 퇴적물 내에 함유되어 있는 천부가스의 특성)

  • Lee Young joo;Huh Shik;Kwak Young hoon;Kim Hag ju;Chun Jong Hwa;Jun Sang Joon;Yoo Hai Soo
    • The Korean Journal of Petroleum Geology
    • /
    • v.7 no.1_2 s.8
    • /
    • pp.35-40
    • /
    • 1999
  • Chemical and isotopic compositions of hydrocarbon gases were analyBed to characterize the properties of the shallow gases distributed in the southeastern part of the Ulleung Basin, offshore Korea. Sediments from the core were also analyzed to determine the characteristics and relationship to shallow gases. Hydrocarbon gases in the sediments consisted of methane (697.9-6054.4 ppm), ethane, propane, butane and hexane. The total carbon content of the sediments ranges from 1.84fe to $5.11{\%}$ and the total organic carbon content ranges from $0.29{\%} \;to\; 2.65{\%}$. High C/N ratio (>10) indicates that input of terrestrial organic matter was prevalent at the time of deposition. The methane content and stable isotopic data indicate that hydrocarbon gases from the sediments are identified to be thermogenic gas and mixture of both biogenic and thermal gases. Based on the Rock-Eval and carbon isotopic data, the level of thermal maturity of organic matter in the sediments $(Tmax<425^{\circ}C)$ is lower than that of gas. It suggests that thermal gases in the sediments migrated from the deeper sediments than the penetrated depth.

  • PDF

Ascophyllum Nodosum Supplementation Strategies That Improve Overall Carcass Merit of Implanted English Crossbred Cattle

  • Anderson, M.J.;Blanton, J.R. Jr.;Gleghorn, J.;Kim, S.W.;Johnson, J.W.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.19 no.10
    • /
    • pp.1514-1518
    • /
    • 2006
  • English crossbred steers (n = 32) and heifers (n = 32) were fed a corn-based finishing diet and supplemented with 2% Ascophyllum nodosum on a DM basis to for various feeding stages of the 119 d feeding period determine the supplementation strategy that maximized intramuscular fat deposition as determined by quality grade. All cattle were implanted with Ralgro$^{(R)}$ on d 36 of the trial and re-implanted with Revalor-S$^{(R)}$ or Revalor-H$^{(R)}$ on d 92. Cattle were blocked by sex and divided into one control and three treatment groups receiving Ascophyllum nodosum. Treatment 1 (trt 1) received Ascophyllum nodosum from d 36 to 50 of the feeding period, trt 2 received Ascophyllum nodosum for the last 14 d of the feeding period, and trt 3 which received Ascophyllum nodosum for both d 36-50 and the last 14 d of the feeding period. Cattle were weighted initially ($385{\pm}4.53kg$) and every 28 d following until they reach an average BW of $554{\pm}7.46kg$. No effect for Ascophyllum nodosum supplementation was found on measured performance characteristics. All treatment groups supplemented with Ascophyllum nodosum had higher actual marbling scores (p<0.05) than controls. Trt 1 was found to have a highest marbling score (572.5; p<0.05), whereas the control group having the lowest marbling score (473.8). Trt 1 had a higher quality grade (5.25; p<0.05) than the control (3.94) group, but did not differ from trt 2 (4.56; p = 0.105) and trt 3 (4.75; p = 0.236) where high Select = 4, and low Choice = 5. Trt 2 did not differ from trt 3 (p = 0.655), or the control group (p = 0.140) for quality grade. However, trt 3 did tend to differ (p = 0.057) from the control group for quality grade. Control group animals graded 25% Choice, 62.5% Select; trt 1 graded 75% Choice, 18.8% Select; trt 2 graded 62.5% Choice, 25% Select and trt 3 graded 56.3% Choice and 31.2% Select. Overall, treatment groups had a 39.6% increase in Choice quality grade and a 37.5% decrease in Select quality grade when compared to the control animals.

Accuracy of Sentinel Node in Detecting Lymph Node Metastasis in Primary Endometrial Carcinoma

  • Farghali, Mohamed M;Allam, Ihab S;Abdelazim, Ibrahim A;El-Kady, Osama S;Rashed, Ahmed R;Gareer, Waheed Y;Sweed, Mohammed S
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.16 no.15
    • /
    • pp.6691-6696
    • /
    • 2015
  • Background: Endometrial carcinoma is the most common gynecological cancer and its treatment is still controversial, especially in its early stages. There are conflicting data about the efficacy of retroperitoneal lymphadenectomy during abdominal hysterectomy and bilateral salpingoophrectomy treatment. Lymphadenectomy carries a risk of severe complications, especially in women with co-morbidities. Selective lymphadenectomy has been widely employed for staging evaluation of endometrial carcinoma because it is simple and seems to provide reliable data regarding nodal metastasis. This study was designed to evaluate accuracy of sentinel node sampling in detecting lymph node metastasis in primary endometrial carcinoma during staging laparotomy. Materials and Methods: Ninety-three women with endometrial carcinoma at high-risk for nodal metastasis were studied. During laparotomy, methylene blue dye was injected into sub-serosal myometrium, then retroperitoneal spaces were opened and blue lymph nodes within pelvic and para-aortic regions were removed as separate specimens for histopathological examination (sentinel lymph nodes = SLNs). Hysterectomy and selective lymphadenectomy then performed for all women included in this study. Results: Deposition of methylene dye into at least one lymph node was observed in 73.1% (68/93) of studied cases. 18.3% (17/93) of studied women had positive lymph node metastasis and 94.1% (16/17) of them had positive metastasis in SLNs. In this study, SNLs had 94.4% sensitivity and 100% specificity in prediction of lymph node metastasis. Mean number of lymph nodes removed from each case decreased when SLNs biopsy were taken. Conclusions: SLNs are the key lymph nodes in endometrial tumor metastasis and their involvement could be an indicator for whether or not complete systematic lymphadenectomy is needed during staging laparotomy.

Fluid Inclusion Studies of the Fluorite Deposits in Korea (우리나라 형석광상(螢石鑛床)의 유체포유물(流體包有物) 연구(硏究))

  • Park, Hee In
    • Economic and Environmental Geology
    • /
    • v.9 no.1
    • /
    • pp.27-43
    • /
    • 1976
  • The flourite in Hwacheon, Hwanggangri and Keumsan district are major fluorite producing areas in Korea. The fluorite deposits of Hwacheon district are wholly fissure filling hydrothermal veins embedded in Precambrian gneiss and schists and Jurassic granites. Also some fluorite deposits are emplaced in felsite whose age is unknown. Emplacement of most fluorite veins of the district are controlled by EW fracture system. Fluorites are generally accompanied to chalcedonic quartz and also kaolinite, montmorillonite, dickite and calcite in parts. Vertical and lateral mineral zonings are not distinct. The fluorite deposits in the Hwanggangri district are wholly embedded in limestone and other calcareous sediments of Paleozoic Yeongweol Group. Most of the fluorite deposits belong to one of two categories which are steeply. dipping veins and gently dipping replacement deposits adjacent to Late Cretaceous(83-90mys) granite bodies. The strikes of fluorite veins of Hwanggangri district mostly occupy the fractures of $N30^{\circ}-40^{\circ}E$ and $N30^{\circ}-40^{\circ}W$ system. Fluorites are accompanied to calcite, milky quartz, chalcedonic quartz, and also montmorillonite, kaolinite in parts. But in some deposits, scheelite, various sulfide minerals and barite are accompanied. Emplacement of fluorite deposits are largely controlled by lithology and structures of this district. In some deposits fluorite veins gradate to scheelite veins and also telescoping of the mineral zones are found in this district. In the Keumsan district, fissure-filled fluorite veins and replacement deposits are mostly emplaced in limestone of Paleozoic Yeongweol Group, late Cretaceous quartz-porphyry, granite and sandstone. Some deposits are emplaced in Precambrian metasediments. Mineralogy and other characteristics of the deposits in this district is similar to those of Hwanggangri district. Fluid inclusion studies reveal the difference of salinities, $CO_2$ contents of ore fluid and temperatures during fluorite mineral deposition in the these districts. In Hwacheon district, ore-fluids were comparatively dilute brine and low $CO_2$ content. Filling temperatures ranges $104^{\circ}C$ to $170^{\circ}C$. In the Chuncheonshinpo mine, most deeply exploited one in this district, salinitles range 0.5-2. 2wt. % NaCl and filling temperatures range from $116^{\circ}C$ to $143^{\circ}C$. In the Hwanggangri district, ore fluids were complex and filling temperature ranges very widly. In the contact metasomatic fluorite deposits, ore fluid were NaCl rich brines with moderate $CO_2$ content and filling temperatures range from $285^{\circ}C$ to above $360^{\circ}C$. Fluids inclusions in tungsten and sulfide minerals bearing fluorite veins show high $CO_2$ content up to 31wt. %. Filling temperature ranges from $101^{\circ}C$ to $310^{\circ}C$. Fluids inclusions In mainly fluorite bearing veins were more dilute brine and low $CO_2$ contents. Filling temperatures range from $95^{\circ}C$ to $312^{\circ}C$. Filling temperature of fluid inclusions of Keumsan district are between $95^{\circ}C$ and $237^{\circ}C$. Data gathered from geologic, mineralogic and fluid inclusion studies reveal that fluorite mineralization in H wacheon district proceeded at low temperature with dilute brine and low $CO_2$ content. In Hwangganri district, fluorite mineralization proceeded by several pulse of chemically distinct ore fluids and formed the mineralogically different type of deposits around cooling granite pluton which emplaced comparatively shallow depth.

  • PDF

Effect of Potassium Silicate on Growth and Leaf Epidermal Characteristics of Begonia and Pansy Grown in Vitro

  • Lim, Mi Young;Lee, Eun Ju;Jana, Sonali;Sivanesan, Iyyakkannu;Jeong, Byoung Ryong
    • Horticultural Science & Technology
    • /
    • v.30 no.5
    • /
    • pp.579-585
    • /
    • 2012
  • This study was carried out to investigate the effect of potassium silicate on the growth and leaf epidermal characteristics of horticultural crops viz., begonia (Begonia semperflorens Link et Otto) 'Super Olympia Red' and 'Super Olympia Rose' and pansy (Viola ${\times}$ wittrockiana Hort.) 'Matrix White Blotch' and 'Matrix Yellow Blotch' in vitro. Seeds after germination were grown on a quarter strength MS medium supplemented with potassium silicate ($K_2SiO_3$) at 0, 100, 200, or $300mg{\cdot}L^{-1}$ and were maintained under a photoperiod of 16 hours at $25^{\circ}C$. Growth parameters such as plant height, root length, chlorophyll content, fresh, and dry weights have been recorded after a growth period of 58 days for begonia and 94 days for pansy. In begonia, fresh weight was significantly greatest in the $200mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment in both 'Super Olympia Red' and 'Super Olympia Rose'. In both pansy cultivars, fresh weight was the greatest in the $200mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment than other treatments. Chlorophyll content was significantly greater in the $100mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment for both the cultivars of begonia. Leaf area significantly increased with the higher concentrations of $K_2SiO_3$ treatment in both cultivars of pansy. Stomatal structures on the leaf epidermis were observed with scanning electron microscopy (SEM). In begonia 'Super Olympia Rose', the structure of stomata were more compact in size in the $300mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment than in the control. Similarly, in pansy 'Matrix White Blotch' the surface of stomata appeared to be smoother in the $300mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment than those wrinkled appearance in the control. The surface of the leaf epidermis appeared to be compact due to Si deposition, and thus results indicated that Si positively affected the growth and biomass production of these species. Our data show that the effect of Si on growth parameters is strongly dependent on cultivar of the plant species tested.

A Study on Blasting Method for the Smallest of the Scour Depth after Pier Construction (교각의 세굴심도 최소화를 위한 발파공법 연구)

  • 김가현;김종주;안명석
    • Explosives and Blasting
    • /
    • v.21 no.3
    • /
    • pp.23-35
    • /
    • 2003
  • An analytical diffusion model for flood routing with backwater effects and lateral flows is developed. The basic diffusion equation is linearized about an average depth of (H + h), and is solved using the boundary conditons which take into account the effects of backwater and lateral flows. Scouring phenomenon around pier which affects on the support function of pier and the stabilization if river bed is a complex problem depending on flow properties and river bed state as well as pier geometry. therefore, there is no uniting theory at present which would enable the designer to estimate, with confidence, the depth of scour at bridge piers. The various methods used in erosion control are collectively called upstream engineering, HEC-RAS Model, underwater blasting. They consist of reforestation, check-dam construction, planting of burned-over areas, contour plowing and regulation of crop and grazing practices. Also included are measures for proper treatment of high embankments and cuts and stabilization of streambanks by planting or by revetment construction. One phase of reforestation that may be applied near a reservoir is planting of vegetation screens. Such screens, planted on the flats adjacent to the normal stream channel at the head of a reservoir, reduce the velocity of silt-laden storm inflows that inundate these areas. This stilling action causes extensive deposition to occur before the silt reaches the main cavity of the reservoir.