• 한국의학물리학회지:의학물리
• /
• 제15권4호
• /
• pp.247-254
• /
• 2004

신체 심부의 악성종양치료를 위한 6～15 MV의 강력한 에너지의 방사선과 종양만을 조사하기 위한 입체조형치료, 세기 조절방사선치료, 입체적 치료방법 등이 개발됨으로써 방사선의 사출구가 전체 공간으로 확대되고 출력선량도 환자당 5～10 Gy의 과다 선량을 방출하기 때문에 고밀도의 차폐벽이 요구된다. 저자들은 세기조절방사선치료(IMRT)용 고 에너지 선형가속기를 기존건물에 설치하기 위하여 일반 콘크리트와 철, 티타늄등 중금속을 혼합한 고 밀도 차폐벽돌을 제작하여 방어벽을 설계하고 건축된 차폐벽으로부터 투과 산란된 선량을 측정하여 상호 비교하였다. 고 밀도 차폐벽돌을 사용함으로서 기존의 콘크리트(3.5 g/cc)에 비하여 고 에너지의 차폐율 즉 반가층 두께를 약 1/2로 줄일 수 있었다.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.