• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.879-880
• /
• 2008

At the high speed operation, the boost negative bias can reduce the negative torque and increase the dwell angle, so the output power and efficiency can be improved. In this paper, a novel power converter for single phase SRM with boost negative bias is proposed. A simple passive capacitor circuit is added in the front-end, which consists of three diodes and one capacitor. Based on this passive capacitor network, the two capacitors can be connected in series and parallel in different condition. In proposed converter, the phase winding of SRM obtains general dc-link voltage in excitation mode and the double dc-link voltage in demagnetization mode. The operation modes of the proposed converter are analyzed in detail. Some computer simulation and experimental results are done to verify the performance of proposed converter.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1383-1388
• /
• 2010

The latest generation of tram is low-floor design, various nations in europe and japan have developed battery driven hybrid trams that combine battery and wiring. Battery driven tram system is achieved by contactless power supply system, thus system is needed high efficiency, high power and low weight traction motor for maximization of energy efficiency. Research from abroad is still in induction motor(IM) application, and it is not meet the efficiency and the power per unit volume in IPMSM. In this paper, we design compare IM and IPMSM to apply battery driven tram, and then compare these motors. To design the motor, we estimate the loading condition at first. Loading condition includes rolling resistance, air-drag resistance, and slope resistance. Based on the loading condition by estimation, we determine the power and compute rated voltage and rated current. In this paper, voltage is limited by battery voltage level. As a result, volume about IM is 1.98 times bigger than IPMSM under same condition. Even though IPMSM is bigger than IM in power density per volume, we consider more factors for actual application because there are demagnetization of permanent magnet in IPMSM and so on by external environment conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.929-930
• /
• 2006

This paper presents a direct instantaneous torque control (DITC) of Switched Reluctance Moto (SRM) with a novel 4-level converter to obtain smooth torque and dynamic performance improvement. The DITC method can reduce the high inherent torque ripple of SRM drive system, but driving efficiency and dynamic performance are somewhat low due to the slow excitation current build-up. Since the 4-level converter can obtain a addition high voltage to get fast excitation current and demagnetization current, so, it can improve dynamic performance easily. As a high performance SRM drive system with low torque ripple and high dynamic performance can be implemented. The validity of proposed method is verified by some computer simulations and comparative experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.661-662
• /
• 2015

최근 친환경적인 기술 개발에 대한 요구가 증가함에 따라 기존 엔진의 역할을 직접적으로 대체하게 되는 전기자동차용 전동기에 대한 연구가 활발히 진행되고 있다. 영구자석을 사용한 전동기의 경우, 계자 권선이 없기 때문에 회전자 동손이 없어지면서 효율이 높아지는 장점이 있지만 온도 상승 및 과부하 등으로 인한 영구자석의 불가역 감자로 인한 고장 가능성이 존재한다. 본 논문에서는 이러한 영구자석 감자현상을 진단하기 위한 방법 중 하나로 회전자 구속 조건에서 저전압 고주파 주입을 통한 입력전류 파형의 스펙트럼 분석을 제안한다. 제안한 방법은 전동기의 회전자를 구속시킨 상태에서 진단신호를 입력하고 인버터의 출력전류 파형을 측정하여 스펙트럼 분석을 수행하는 방법이다. 제안한 방법은 시뮬레이션을 통해 검증하였다.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.88-95
• /
• 2008

In the paper, the permanent magnet synchronous generator of 1.5[MW] output power which is driven directly without gear system is designed by conventional magnetic equivalent circuit method and analyzed by finite element method. We analyzed the characteristics of generator like no load, rated load, short circuit condition and demagnetization of permanent magnet in order to verify the design results by magnetic circuit method. The last, the analysis results of two kinds of rotor types are compared with each other. Especially the THD(total harmonic distortion) of output voltage is examined for the comparison.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.398-402
• /
• 2011

A novel laminate composite of FeCuNbSiB/FeNi /PZT is proposed, where FeCuNbSiB has a permeability of around 100000, which is much larger than that of FeNi. The high-permeability FeCuNbSiB was laminated with piezomagnetic FeNi rather than attached to its ends. It is expected that the effect produced by the high permeability will act on the whole of the piezomagnetic layer. While a FeNi layer was laminated with a FeCuNbSiB layer, the strong demagnetization produced by the latter was expected to be imposed on the FeNi layer as well as the applied fields. The distribution of applied fields was altered by the high-permeability material (both bias and ac field) and the field variation positively contributed to the ME effect in piezomagnetic/piezoelectric composites. Thus the ME voltage coefficient along with the field sensitivity were improved.

• 전력전자학회논문지
• /
• 제12권3호
• /
• pp.205-212
• /
• 2007

본 논문에서는 토오크 맥동을 줄이고 동특성 및 효율을 개선하기 위해 새로운 4-레벨 콘버터 이용한 DITC SRM 구동방식을 제안하였다. 4-레벨 콘버터는 콘덴서의 전압을 이용하여 여자 및 감자 시 높은 전압을 인가하여 여자특성을 개선할 수 있는 장점을 가진다. 본 논문에서는 DITC의 동특성 개선을 위해 사용된 4-레벨 콘버터의 동작특성과 부스트 전압에 따른 효율 개선에 대해 해석하였다. 이를 통해 제안된 SRM을 위한 4-레벨 콘버터의 DITC 제어기법을 시뮬레이션과 실험을 통해 검증하였다.